Fabrication Tenders

MANUFACTURING & SUPPLY SET OF FABRICATION, WELDING MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH (Q3)

Concrete Encasing of the bottom portions of the steel structures in CHP, Boiler and ESP Unit 7 Phase I

MAT. CODE: W97717002035; BOLTED STEEL STRUCTURE FOR ACC AS PER TDC NO. HXE/SK/2358 REV. 00, MAT. CODE: W97717002078; BOLTED STEEL STRUCTURE FOR ACC AS PER TDC NO. HXE/SK/2366 REV. 00

Fabrication and Supply of POT panel and Straight Panel with wear bar welding

selection of agency for Fabrication, Supply and for Fabrication, Supply and for Fabrication, Supply and for Fabrication, Supply and for Fabrication, Supply and for Fabrication, Supply and for Fabrication, Supply and for Fabrication, Supply and for ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication , ... for Fabrication ,

Providing fabrication and exhibiting moving tablue float of Uttar Pradesh Power Corporation Limited Lucknow

Providing fabrication and exhibiting moving tablue float of Uttar Pradesh Power Corporation Limited Lucknow

Providing fabrication and exhibiting moving tablue/float of Uttar Pradesh Power Corporation Limited Lucknow.

Providing fabrication and exhibiting moving tablue/float of Uttar Pradesh Power Corporation Limited Lucknow

Providing fabrication and exhibiting moving tablue/float of Uttar Pradesh Power Corporation Limited Lucknow.

HIRING OF FABRICATION ASSISTANCE CUM MAINTENANCE GANG AT WORKSHOP SEHORE FOR ASSISTING IN STEEL FABRICATION MACHINE MAINTENANCE AND YARD UPKEEP WORK UNDER THE ADMINISTRATIVE CONTROL OF EXECUTIVE ENGINEER WORKSHOP DIVISION SEHORE M P

Please check the tender Documents carefully and quote your rates accordingly for the CUSTOMISED FABRICATION WORKS IN AIRLINE ATTACHED TO AIR DRYER AND STRUCTURAL STEEL WORKS IN SHED AREA AT COIMBATORE LPG PLANT. Overall GST on quoted rate should be 18% and in case of any deviations his/her bid will be disqualified. Ok.

Supply and Fabrication of Main Distributation main panel in Nagar Nigam Saharanpur

Supply and Application of Paint on Steel Structures in TMD and TMD OS Area Along With its Auxiliaries Area for Stg-1,2 and 3 at NTPC Rihand.

Misc works likes repairs to rolling shutters grills and other to higher type quarters and gates to lower type quarters and priority fabrication works at sector-I and II in RG I Area GDK

FABRICATION OF BEND SHORT PIES NIPPLE 10INCH MS 8INCH MS PIPE AT LAKARKA SIDING NEW DELIVERY AKWMC OCP KATRAS AREA.(2) MISLLANEOUS FABRICATION BY CUTTING AND WELDING JOBS FOR 800 GPM PUMP AT AKWMC

Dismantling, fabrication,erection of Cross bracing, discharge structure maint. platform of 2C,repairing of counter wt. structure of 3C1,3C2,maint. platform of both apron feeder and other misc. repairing job of steel structure in Old tripper NGH CHP

Fabrication and erection of steel structure base frame and installation of Fog cannon upon the structure base at different locations in mines and maintenance work of wheel washing and and instant shower system at Balram OCP, Hingula Area.

Fabrication work of new S. S. Coal nozzle tip and S. S. Coal nozzle feeder outlet hopper for the Bowl Mills XRP-763/803, Stage-I and II, KSTPS, Kota

Fabrication work of new S. S. Coal nozzle tip and S. S. Coal nozzle feeder outlet hopper for the Bowl Mills XRP-763/803, Stage-I and II, KSTPS, Kota

P/F New additional leaf springs, Re-arching and setting of all leaf spring, and other repairing, mechanical, electrical and welding work for water tanker working in Water Emergency Mandawali in AC-57

Construction of Street with (80mm thick I.P Blocks) And Drain Type-II From Vikram Welding work to H/O karan 1216 And Adjoning Street At Parbhu Prem Puram In ward No.12.Recall

Repairing/Replacement of complete undercarriage (both side) welding work of track frame with mounting hole and thread making and repairing of damaged bucket and sprocket lugs of Tata Hitachi 650 sl. No. 186.

1)Heavy Duty Earthing Clamp, Cap: 600Amps for Welding Work. Technical specification as per annexure A Attached 2)Regulator End Flashback Arrestors For Fuel Gas(Oxygen GAS & LPG), Specification as per annexure-A

EYE PROTECTIVE POWER LESS WHITE GLASS FOR ARC WELDING WORK,SlZE-4 1/4 INCH 3 1/4 INCH 1/8 INCH,MAKE-Weldstar OR SIMILAR. Accepted Make: BISHWAS BRABD OUR OWN MAKE

Repair and replacement of CI sluice valves structural steel work stainless steel rod and split plummer block bearing housing situated inside the intake well at Dhanikhari Dam

Providing and fixing Structural steel work and Corrugated GI Sheets to Roof, On terrace, Waterproofing, Drainage line at Type IV, Bldg. No. 2 ESIS Hospital Mulund,Mumbai

MOW to Providing and fixing Structural Steel Work and Corrugated G.I. Sheets to Roof On Terrace, Type - V, Bldg. No. 1 at ESIS Hospital at Mulund, Mumbai.

Structural steel work in bottom of conveyor crossing nallah near D point to prevent the spillage of coal dust in nallah of Churcha (RO) of Baikunthpur Area

Structural steel work in bottom of conveyor crossing nallah near D point to prevent the spillage of coal dust in nallah of Churcha (RO) of Baikunthpur Area

Repair and maintenance of VIP-5 at Ved Mandir Enclave by way of colour coated G.S Sheet roofing, structural steel work and other allied works CNO614-NP

Work.1.CONSTRUCTION OF CD WORK AT PANGRASHINDE TQ BASMATH DIST HINGOLI Work.2.PROVIDING STRUCTURAL STEEL WORK FOR SOLAR PANEL AT PANGRASHINDE TQ BASMATH DIST HINGOLI

Providing of collapsed Boundary wall with Damage structural steel work and providing Green net along the Boundary wall at Regional Hospital Kargali under GM unit BnK Area

Upgradation of RSQ 13 at Rehari, Jammu by way of pavit tiling including cement concreting, Structural Steel work in built up sections and other allied works CNO455

Renovation of damaged outside Flooring, M.S. Grill Work, A.C.P. Paneling, Modular False Ceiling, Structural Steel Work at A/5 (Pratapgad) Minister Bungalow at Madam Cama Road, Mumbai.

External Development and Landscaping work including Tensile Roofing and Structural Steel work for New Academic Building at School of Planning and Architecture (SPA) campus, Bhauri, Bhopal (M.P.).

Providing and fabrication work of Kadi shutter gates of size 1.0m x 0.5m 25nos for Mandriya stop dam of W.R. Division Chindwara

Providing and fabrication work of Kadi shutter gates of size 1.5m x 0.5m 90nos of Top stop dam of W.R. Division Chindwara.

Providing and fabrication work of Kadi shutter gates of size 1.0m x 0.5m 25nos for Mandriya stop dam of W.R. Division Chindwara

Providing and fabrication work of Kadi shutter gates of size 1.4m x 0.5m 88nos for Chopna stop dam of W.R. Division Chindwara

Providing and fabrication work of Kadi shutter gates of size 1.5m x 0.5m 90nos of Top stop dam of W.R. Division Chindwara.

Providing and fabrication work of Kadi shutter gates of size 1.25m x 0.5m 76nos for Rawra stop dam of W.R. Division Chindwara

Providing and fabrication work of Kadi shutter gates of size 1.4m x 0.5m 88nos for Chopna stop dam of W.R. Division Chindwara

Providing and fabrication work of Kadi shutter gates of size 1.2m x 0.5m 30nos for Halalkhurd stop dam of W.R. Division Chindwara.

Providing and fabrication work of Kadi shutter gates of size 1.5m x 0.5m 70nos of Lonibarra stop dam of W.R. Division Chindwara.

Providing and fabrication work of Kadi shutter gates of size 1.2m x 0.5m 30nos for Halalkhurd stop dam of W.R. Division Chindwara.

Providing and fabrication work of Kadi shutter gates of size 1.25m x 0.5m 76nos for Rawra stop dam of W.R. Division Chindwara

Construction of RCC Foundation for steel Structure Galvanized tubular steel structure staging 4.5 mtr. for HDPE water storage tank and Solar panel 2000 liters capacity water storage tank etc at Chaplasi Village, Bhandaria Block under Garhwa district

FABRICATED AND GALVANIZED B-SERIES STEEL STRUCTURE (B-150,B-175 & B-200) WITH BATTEN PLATES AS PER RDSO DRG.NO.ETI/C/0071.REV.E OR LATEST, S-SERIES STEEL STRUCTURE (S-8) WITH BATTEN PLATES AS PER RDSO

FABRICATED AND GALVANIZED B-SERIES STEEL STRUCTURE (B-200 ,B-175 & B-225) WITH BATTEN PLATES AS PER RDSO DRG.NO.ETI/C/0071.REV.E OR LATEST, S-SERIES STEEL STRUCTURE (S-1) WITH BATTEN PLATES AS PER RDS