Fabrication Tenders in Tamil Nadu

Construction of Research Visitors Guest House (G plus 8 floors) by replacing the existing maintenance office building and student facility for IITM, Chennai. SH Providing shed with Pre fabricated steel structure over the electrical equipment at Terrace, Structural glazing from Ground floor to 8th floor

Supply of raw material and Fabrication and erection of work station and full height partition in existing temporary structure in AUGF, MPDD, BARC FACILITIES (K)

Fabrication and Erection of SS304L Piping Subassemblies and associated structural works for Analytical Waste UG Trench System for FRP, FRFCF Project

Procurement of Digital Controlled IGBT Inverter Based GMAW Welding Machine (400 Amps) - BHEL/Trichy, BHEL/Ranipet, BHEL/Bhopal, BHEL/Varanasi, BHEL/Haridwar each 1 set

Welding Machine >=5<=10 kVA Rated Input Power Specifications Rated Input Power (In kVA)>=5<=10 Rated Input Current (In A)>20<=25 Minimum Welding Current at 60% duty cycle (In A)>1

Rubber Hose for Oxy-Acetyline welding & cutting with braided textile re-inforcement in blue colour conforming to IS:447/1988 + Rubber hose for Oxy-Acetyline welding & cutting with braided textile re-inforcement in red colour conforming to IS:447/1988

Unit II Flue Gas Duct B pass Complete inspection rectification of eroded weaken duct portions by patch welding and metal filling of eroded weaken welding joints in flue gas duct from right APH outlet interconnecting duct to ESP inlet during annua

Unit II Flue Gas Duct A Pass Complete inspection rectification of eroded weaken duct portions by patch welding and metal filling of eroded weaken welding joints in flue gas duct from left Outlet interconnecting duct to ESP inlet during annual ove

Flue Gas Duct A Pass Complete inspection rectification of eroded weaken duct portions by patch welding and metal filling of eroded weaken welding joints in flue gas duct from left Outlet interconnecting duct to ESP inlet during annual overhaul of

Supply ,Fabrication and erection of new steel structure and Dismantling ,Erection defective 230KV AB Switch (WOE)by new Switch in 230 KV Myvadi-OKM feeder Bus-I at 230 KV Switching Station Myvadi

Supply ,Fabrication and erection of new steel structure and Dismantling ,Erection defective 230KV AB Switch (WOE)by new Switch in 230 KV Myvadi-OKM feeder Bus-II at 230 KV Switching Station Myvadi

for Supply ,fabrication and Erection of new steel structure and Dismantling ,Erection of existing defective 230 KV AB Switch(WOE) by new Switch in 230 KV Myvadi-Kadamparai-I feeder of Bus-I

fabrication and supply of Auto-Weld Beams, Boxes, Bracings and Posts for NTPC projects with BHEL material

Fabrication and Supply of Non IBR Piping to Mauda, Panki, Patratu and Yadadri projects (With Vendor material)

Tender is for supply, fabrication and fixing of conveyor soap tray guard at BPCL Tuticorin LPG plant.

WELDING ELECTRODES MS AS PER AWS E6013 MEDIO SUPER BONDWELDING ELECTRODE 3.15 AS PER AWS E 6013, SIZ

DISMANTLING, FABRICATION AND RE ERECTION OF DE SYSTEM IN COAL YARD AT TNPL UNIT- II, TRICHY.

SUPPORT SERVICE FOR FABRICATION AND ERECTION OF FRP PIPELINES IN PULPMILL AT TNPL UNIT II, TRICHY.

FABRICATION AND ERECTION OF STRUCTURALS FOR ELECTRICAL WORK IN PULP MILL AT TNPL UNIT-II, TRICHY.

FABRICATION AND ERECTION OF SS PIPELINE IN PULPMILL AND CLO2 PLANT AT TNPL UNIT - II, TRICHY.

Fabrication and Erection of Structurals in Pulp Mill and CLO2 Plant at TNPL Unit-II, Trichy.

Fabrication and erection of shed for Biometric System at Coal Gate in TNPL Unit-II, Trichy.

FABRICATION AND ERECTION OF SS PIPELINE IN PULPMILL AND CLO2 PLANT AT TNPL UNIT - II,TRICHY.

DISMANTLING, FABRICATION AND ERECTION OF CS PIPES AND STRUCTURES IN WWTP AT TNPL UNIT- II, TRICHY.

FABRICATION AND ERECTION OF MS STRUCTURALS AND FIXING OF ROOF SHEETS AT TNPL UNIT- II, TRICHY.

Labour Charges for Fabrication, of Steel Dual Desk with Powder Coating charges and including consumables

Labour Charges for Manufacturing, Fabrication, Polishing, Assembling and Packing for Steel and Wooden Furniture Items

Fabrication and supply of Coils and Loose tubes with BHEL Materials OSB AND transportation of finished goods to Neyveli Project site

Supply, Fabrication and erection of Steel structures, Earthing Materials, Earth mat, Earth bore, Clamping earth bore, Provision of Station auxiliaries etc., for establishment of 110/22 KV Substation at Irumbai in Villupuram 110/11 KV side (DCW).

Supply, Fabrication and Erection of steel structures, Erection of equipments, LED Fittings, Fire fighting equipments and station auxiliaries for the establishment of THIRUMALAPADY 110/22 KV SS with 110/22 KV, 2x10 MVA, Power Transformer (Part-II).

Supply, Fabrication and Erection of steel structures, erection of equipments, strung bus, Supply and erection of station auxiliries etc., for introduction of 110/33 KV ratio with 1x16 MVA Power Transformer at Kadalangudy 110/11 KV SS.

Fabrication and Supply of restriction orifice plate assemblies, Puddle flange and flat-faced flanges with BHEL Material OSB

TIG WELDING TUNGESTON ELECTRODES OF DIA 2.4MM X 150MM LONG AS PER AWS-ASTM- CLASSIFICATION EWTH2 AS (Q3)

Custom Bid for Services - Reconditioning of Gas Welding tools like Oxygen Acetylene Regulators Cutting Torches and Blow Pipes

Power Supply arrangement for nuclear monitoring instruments and welding power socket outlets at radioactive areas of KARP Kalpakkam

Crux Weld Insulated Gate Bipolar Transistor (IGBT) Portable, Crux Weld Insulated Gate Bipolar Transistor (IGBT) Portable Welding Machine

Procurement of Welding Distribution Board with 100 KVA Dry Type Transformer, MCCBs, Meters and 12 Nos. Feeder assembly.

Supply & Commissioning of Portable Single operated Transformer based Diode Rectifier type Conventional DC Arc Welding Machine, Capacity- 600A

Replacement of damaged valves and pipe line by High pressure welding IBR in various location of steam turbine

ONE COACH SET OF WELDING PARTS ON TROUGH FLOOR FOR LGS EOG SHELLS TO DRG.NO. 58110054, ALT 'c'--

Supply of set of spares suitable for Migatronic make TIG Welding set as per details enclosed. Make: MIGATRONIC.

Machine Socket 70 MM2. Similar to Part No. 9771540 of M/s. KEMPPI. Suitable for KEMPPI Welding Plants.

Hosep.2x600A/2 OM/++/FSC/ TWIN HOSE PACKAGE, Part no 11DO800600/200 for Robotic welding machine INV 2546.

Manufacture, supply and installation of Welding manipulators and fixtures ( Detailed description and specifications are attached in separate sheet)

GAS ARGON FOR ALUMINIUM WELDING TO IS. 5760/98,Rev-2 (RA-2021) Firm's Offer: As per tender

ONE COACH SET OF WELDING PARTS ON TROUGH FLOOR FOR LGS EOG SHELLS TO DRG.NO. 58110054, ALT 'c'.

Supply, installation & commissioning of IGBT based 3 phase Welding plant capacity: 600 Amps as per technical specification enclosed.

Argon/CO2 PROFESSIONAL GAS FLOW METER(PEA SHOOTER) FOR MIG/TIG welding. Make:SWPS,ADOR . Offer accepted make: SWPS.

GMAW WIRE ER90S-B92 0.8 MM for STBW Machine Welding. Material selected as per ASME sec. II. c

Improvements to track by welding of avoidable joints at Shell, Furnishing and ICF yard at Anna nagar &Villivakkam