Fabrication Tenders in Telangana

Welding of Pick Holders on Feeder Breaker Crusher rolls required at MOCP, RG.1 area for a period of One year

Contract for Outsourcing of Skilled Manpower for Welding and Gas Cutting Activity in Underground at GDK 11 Incline, RG-I Area

Outsourcing of welding of pick holders at OC3 CHP and Phase2 CHP of OCP3, RG2 for a period of two years

Nozzle CU Esab item code no: A 651691964 suit for Esab 250 amps MIG welding machine. Make: Esab only. Make; ESAB.

Carbon dioxide gas for welding specn No: Is: 307/1966 Grade-1 and CO2 purity minimum 99.98/99.9% volume(fertilizer quality)

Custom Bid for Services - Wet leasing of welding works at Nizamabad depot for a period of 02 years on outcome basis

A G PIPELINE Size 300 mm, A G PIPELINE Size 200 mm, A G PIPELINE Size 150 mm, A G PIPELINE Size100 mm, A G PIPELINE Size 80 mm, A G PIPELINE Size 50 mm, A G PIPELINE Size 25 mm, A G PIPELINE Size 20 mm, A G PIPELINE Size 15 mm, U G PIPELINE Size 300 ... mm, FABRICATION OF ...

Fabrication and Supply of Single Pin GM Seals Assembly as per Drawing No: 02-82/3210-1A and Specs.

Custom Bid for Services - Fabrication of Polymerized Armour Pannels Similar Category Operation And Maintenance Of Other Machines And Plants

Custom Bid for Services - Fabrication of Polymerized Armour Panels Similar Category Operation And Maintenance Of Other Machines And Plants

Fabrication, Erection and Commissioning of Utility Pipelines for New VAR Furnace as per Scope of Work at Annexure-I

Custom Bid for Services - SERVICE FOR WIND TUNNEL MODEL INSTRUMENTATION AND GENERATION OF FABRICATION DRAWING OF WIND TUNNEL MODEL

Replacement of existing damaged base frames of Pumps alongwith overhauling and Trench Cover structure fabrication and Erection in CPP

EPC for Design, Fabrication, supply and Erection of PEB shed for extension of R and M shed towards FAC

DESIGN, SUPPLY , FABRICATION, ERECTION & COMMISSIONING OF NEW STERILIZER FOR OUR OIL PALM PROCESSING PLANT AT APPARAOPET, BHADRADRI KOTHAGUDEM DIST

Fabrication and errection of steel foot over Bridge on weir Restoration of Chinthalacheru at Mini Tank Bund at jagtial

Fabrication of anti erosion protection shield with suitable clamps for Economiser and LTSH coil tubes Unit9 of 250MW Boiler.

Design, Fabrication, Supply and Erection of Re-locatable prefabricated security cabins at Sigareni Thermal Power Plant, Jaipur, Mancherial, Telangana

Fabrication and supply of 40cm Iron mesh tree guards at various places in Dammaiguda Municipality under Municipal General Funds

Fabrication Supply & fixing of water controlling arrangements for the work of Oora cheru Reddypet(V), Ramareddy(M), Kamareddy Dist.

Fabrication, Supply and delivery of MS sheet for making trailer body of Tractor bearing no. AP 36 Y 8239.

Procurement of 04 Nos of Water Bowsers (10000 Ltrs capacity)(Chassis, Fabrication & Accessories) as per Specifications at Part-C

Supply, fabrication and fixing in position of Stainless steel railing at Ambedkar center Junction development under Pattana Pragathi Funds

Outsourcing of services for fabrication of Ladder Assy for Tata Hitachi EX 1900 Hyd Excavators working at RGOCM-1.

Fabrication Supply and delivery of strret light pole at Boys junior college ground ward no 49 in MBNR MPLTY

Fabrication and supply of M S Frame Bathukammas for natural flowers with 5ft height for the year 2025-26.

EPC FOR DESIGN, SUPPLY, FABRICATION AND ERECTION OF INDUSTRIAL SHED FOR NEW TITANIUM SHOP THROUGH PEB SYSTEM AT MIDHANI

Dismantling of existing equipment and fabrication and erection of new Electronic packers 1 No with auxiliaries in packing plant

Design, Supply, Fabrication, Erection/installation, Commissioning, Inspection and Maintenance of different heights self-supported Towers across the Telangana state.

Design, Manufacture, fabrication, supply, Installation and commissioning of refurbishment/repair of existing drop pit with Automation at ELS/LGD.

Floor Finishing Works at 93mtrs and Floor Extension Works at 86mtrs for Approaching ASLD, Torquing, Welding,Bolting of Structural Members at 93mtrs Erection, Welding,Fabrication,Torquing of Bal Members Restoration of floor grills at 93mtrs

Retrofitting Fabrication Laying Installation, prove out of ducting system for wood dust extraction system in 09 shop FY 2026 27

Portable inverter type single Phase Welding Machine as per the following specification :- (1)Type of Welding machine : Portable inverter type single Phase Welding machine (2) Input Voltage frequency: 50Hz (3)Output current range: 20-220 Amp. (4) Type ... of welding holder ...

Portable inverter type single Phase Welding Machine as per the following specification :-(1) Type of Welding machine : Portable inverter type single Phase Welding machine (2) Input Voltage frequency: 50Hz (3) Output current range: 20-220 Amp. (4) ... of welding holder ...

Augmented Welding Simulator (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Carrying out balance Bracings erection, Alignment Welding/ Bolting of Pipe Rack 1J-1K of Unit-1 at 2X800 MW TeSTPP Telangana Site.

NSHES - Supply of consumables, certain paints, welding & cutting material, caulking material, T&P material, cotton waste, dungry cloth at NSHES, Nagarjuna Sagar.

BM-Attending Boiler eroded tubes replacement and welding works at Economizer coils in Unit-9 during Annual overhaul period of unit-9.

WELD TRIMMER POWER PACK VERSION FOR A T WELDING AS PER RDSO SPEC NO TM/SM/9 DT.16.08.1991 SECOND REVISION 2022

Outsourcing of Welding of Pick Holders and Picks required at GDK.1 CSP, RG.1 area for a period of Two years

Supply of Welding machines of ESAB/ TORNADO/ Ador Fontech/D&H make for Dry fly ash handling system in KTPS-VI Stage

NSHES - Supply of Various Sizes of Seamless Pipes, Elbows, Flanges, Welding Electrodes, Bolts and Nuts and Other Consumables at NSHES, Nagarjuna Sagar.

Torch Body Panasonic part code no: TCU35022 to suit for panasonic 400 MIG welding machine torch. Make: Panasonic or Ador or ESAB

Complete assembly of CO2 regulator flow meter, gas pre-heater for CO2 welding plants IS 6901. Make: SWC/ESAB/ Messer/Weld Star

CARBON DI-OXIDE GAS for welding to specn. No. IS:307/1966 Grade.I and CO2 purity Minimum 99.7% by volume (Fertiliser quality).

Heavy duty Male Female connector OKC 70-95 set for MIG/MAG Welding machine Make: Supersonic,Esab, Ador,GCE,Keean Make: Supersonic

Carbon Dioxide Gas for welding to IS: 307- 1966 (Reaffirmed 2022), Grade 1 and CO2 purity Minimum 99.7% by volume (Fertiliser quality).

Solid MIG/MAG Welding Filler wire - 1.2mm dia., Class - IV to IRS: M-46/20, Grade: ER80S-G, AWS: A5.28/A5.28M:2020.

automatic and semi automatic welding equipment with self adjusting arcs mig/mag - as per IS 7931 pa Experience Criteria 3 Year (s)

Custom Bid for Services - Maintenance for Robotic Welding Machine at BDL KBU Similar Category Repair and Overhauling Service Repair, Maintenance and Installation of Plant Systems/Equipments