Fabrication Tenders in Telangana

Supply, fabrication, installation of equipment required for setting up new canteen, RO plant and other civil works in the canteen, South ancillary buildings in the premises of Telangana Secretariat, Hyd., (2nd call)

Awarding of service contract for Dismatling, Fabrication and Erection works of bunkers transfer chutes, gantries, inpit crusher etc, on tonnage basis at KCHP, Manuguru Area for a period of 2 years - Reg.

Laying of CC Road from Narsimlu Goud House to Yousuf House and Fabrication, Transportation and Installation of Octagonal poles with Highmast LED Lights at Shammu (H), in No.24 in Sadasivpet Municipality.

Modification/ Rework (Fabrication, rework, relagging, supply and supervision during erection) of RC pump piping and fitting items of Stage-I Absorber of 3x200MW 3x 500MW, Stage-I II , NTPC Ramagundam-FGD Site

Supply and fabrication cost of hydraulic 25KW alternators pulley puller required for opening during POH. Pulley Jack with table, 20mm Thickness MS sheets,Square pipe 75*75, Angular rods 45x45, high t

Supply of consumables, welding electrodes, grinding wheels,bolts and nuts, paints etc. required for attending repair works of Draft tube gates of Unit-3 and 5 and other maintenance works of MMSD-II at SLBHES.

Hiring of services for welding of flanges to 150mm and 100mm pipes, transporting of pipes, laying and assembling of pipes from surface to continuous miner panel along the belt road way at Vakilpalli Mine, RG2

Outsourcing for welding of picks and Pick holders to 500 TPH In-Pit Crusher-rolls at OCP-SRP for a period of 3 years as per the Scope of work, Terms and Conditions of NIT.

Supply Installation Commissioning Integration and Demonstration of the functionality of 6 PLUS 2 axis Robotic workstation to be synchronized with existing automatic Fronius TPS 3200 Cold Metal Transfer welding System as per the Technical Specificatio

Silicon Anti Spatter Spray for MIG welding Torch (250 grams CAN each). Anti spatter should be non-toxic, non-flammable and non-conductive Make/Brand: Zenith or Aero press or Aitco or Aerol. Make: Zeni

WL12-001-00414, WL12-001-00466, WL12-001-00602, WL12-001-00033, WL12-001-00052, WL12-001-01011, WL12-001-00615, WL12-001-00614, WL12-001-00029, WL12-001-00002, WL12-001-00406, WL12-001-00685, WL12-001-00010, SF64-001-00451, GS70-001-00016, WL12-001-00963, WL12-001-00198, WL12-001-00325, WL12-001-00374, WL12-001-00133

CW040700000000005, CW040300600000001, CW040300600000002, CW040300600000003, CW040300600000004, CW040600100000007, CW040600100000008, CW040600100000009, CW040500000000009, CW040500000000010, CW040500000000011, CW040500000000012, CW040500000000013, CW040800000000001, CW040800000000002, CW040800000000003, CW040700000000006, CW040800000000004, CW040800000000005, CW040800000000006, CW040800000000007, CW040800000000008, CW040800000000009, CW040800000000010, CW040800000000011, CW040800000000012, CW040800000000013, CW040800000000014, CW040800000000015, CW040800000000016, CW040800000000017, CW010101015900150, CW040800000000018, CW040800000000019, CW040800000000020, CW040800000000021, REG00503201010150, REG00503201010170, REG00503201010195, CW040800000000022, CW040800000000023, CW040800000000024, CM030000000001636, CM030000000001637

Rolling,Fabrication, Machining of Pulverisers

Erection, Testing and Commissioning of Power Cycle Piping and all associated Piping and Insulation works including handling at site stores / storage yard, transporting to site, inspection, erection, welding, NDT, etc for Unit-5 of Yadadri TPP

TSGENCO-CETD-Procurement of equipment for establishing workshop for conducting practical training programs on welding technologies to ITI qualified Artisans and workmen working in various power stations of TSGENCO at CETD-Quotation called for-Requested-Regarding.

Making of Bathukammas Scale Model by retrieving old existing iron amateurs available in the Urban Biodiversity Wing stock by re-welding and using for installing in 79 different locations in GHMC limits for the year 2025

TGGENCO - YTPS (5X800MW) - Repair and rectification of lighting fixtures and welding receptacles at different locations in Unit-1and2 ,AHP,Service building and BOP areas as and when required during the year 2025-26 for Stage-I.

Making of Bathukammas scale Models by retrieving old existing iron amateurs available in the Urban Biodiversity wing stock by re-welding and using for installing in 64 different locations in GHMC limits for the year 2024.

Raising of Masonry drain, Providing of Pre-cast slabs and RCC slabs from Ambedkar Bhavan to welding shop at Lenin Nagar in ward no. 125-Gajularamaram, Gajularamaram Circle, GHMC (Item No.09) (Completed period 1 month)

Making of Bathukammas Scale Models by retrieving old existing iron amaterus available in the Urban Biodiversity wing stock by re-welding and using for installing in 70 different locations in GHMC limits for the year 2022

Making of Bathukammas Scale Models by retrieving old existing iron amateurs available in Urban Biodiversity Wing stock by re-welding and using for installing in 60 different locations in GHMC limits for the year 2023-24.

HEAT GUN FORPVC WELDING, 240VOLT, 50HZ, 2000 WATT, TEMPERATURE RANGE 52-630 DEGREE CENTIGRADE, AIR FLOW 150-500 LITRE, MODEL: CHG-20-63 OF BOSCH MAKE OR MODEL HG2310 OF STEINEL MAKE OR MODEL CH6060 OF

One set consisting of 10 items (PART NO, DESCRIPTION AND QUANTITY) as per the list of the items enclosed for the use of 202 Tornado manual metal Arc welding machines, Make: Ador Fontech Ltd. Note: OEM

WELDING ACCESSORIES: GLASS COVERS FOR HAND SHIELDS- GLASSES SPARE CLEAR FOR WELDERS SCREEN 1/16" x 3.1/4" x 4.1/4" TO DGS&Ds SPECIFICATION G/Misc/64c(1.5875mm x 82.55mm x 107.95mm). Firm's offer : As

One set consisting of 25 items (PART NO, DESCRIPTION and QUANTITY) as per the list of the items enclosed for the use of 400 amps IGBT inverter based manual metal Arc welding machines of model :FONTE

Custom Bid for Services - Dismantling of existing equipment and fabrication and erection of new Electronic packers 2 Nos with auxiliaries in packing plant Similar Category Operation And Maintenance Of Other Machines And Plants

DISMANTLING OF OLD CBC-I, CBC-II CONVEYORS AND DESIGN, SUPPLY, FABRICATION, ERECTION AND COMMISSIONING OF NEW CBC-I, CBC-II CONVEYORS FOR OUR OIL PALM PROCESSING PLANT AT ASHWARAOPET, BHADRADRI KOTHAGUDEM DIST

Supply, Fabrication, Replacement & Commissioning of CBC-1 Conveyor Flight with 8mm MS Sheet, Screw Pipe, Screw Joining Shafts & Hanger Bearings at Oil Palm Processing Plant, Apparaopet, Dammapeta(M), Bhadradri Kothagudem Dist., Telangana State.

Supply, Fabrication, Replacement & Commissioning of CBC - 2 Conveyor Flight with 8mm MS Sheet, Screw Joining Shafts, Sleeves and Hanger Bearings at Oil Palm Processing Plant, Apparaopet, Dammapeta(M), Bhadradri Kothagudem Dist., Telangana State.

Demolition of existing MS Channels and erection of new MS Channels including fabrication, concreting and painting to MS Channels at intake Motor of Krishna Filter Bed in Gadwal Municipality under Municipal General Funds

Design, Manufacture, Fabrication, Supply, Testing And Commissioning Of Hydraulic System For Mounting And Dismounting Of TFPMPH Drg.No. C/ELS/LGD/Genl/3/129 Of WAP7 and WAG9 Locomotives as per Technical Specifications Attached.

Fabrication, Transportation & Installation of Octagonal poles with Highmast LED Lights near Boolaxmamma Temple & Bhavani Mandir & Shivalayam & Billal Masjid & Bangaru Maisamma & Idgha at ward No.24 in Sadasivpet Municipality, under 15th FC. (2nd Call)

S.R for providing fabrication & erection of M.S frame sheds(3 Nos) with polycarbonate sheet & Galvolume sheet covering and thermocole false ceiling for Quarter No.188 at New MLA Quarters, Hyderabad.(Turn-Key-Basis)

O&M Estimate for Supply, Fabrication and fixing of screw shutters for off take sluices located at 18R,19R,20R and 1L-18R in DBM 60. Of SRSP-II Maripeda Mandal Mahabuababad Dist

Supply, Fabrication and Erection of Office Shed, Watchman Shed and Godown shed along with Civil works at our Oil Palm Nurseries Located at Haripiryala - Mahabubabad (D), Mulug - Siddipet Dist, Ranganayak sagar - Siddipet Dist.

In-House Outsourcing of Fabrication of Sub-Assemblies of HP Heaters, LP Heaters, Condensers, Lube Oil Piping Works and Assembly of HP Heaters, LP Heaters, Condensers, Ejectors and Lube Oil Coolers in HEF

Fabrication Works for Construction of Store Room alongwith toughened glass fixing and partition with entrance doors, Carpentry Works for Construction of Store Room, Tiling Work for Construction of Store Room, UPVC Window work with safety Grills for Store Room, Toughened Glass Work for Store Room, Fitment Items work for Store Room, Gym Area and Reception and Storage works

laying of CC road from Sara Electrical to 18-12-419/C/1/35 Al-Madina welding shop, 18-12-419/C/22/A/1 Swagath masala mills at Ismath nagar Balapur road in Chandrayangutta Div-43

TGGENCO-KTPP(1*600MW)-O&M-II-BMD-Erection and dismantling of certain scaffoldings and platforms, carrying out thickness survey, HP welding and alignment of RH&SH coils in 1*600MW boiler during 2024-25 COH works.

TGGENCO -CETD- Div-I-Supply of various consumables for establishment of workshop for conducting practical trainig programs on welding technologies to ITI qualified Artisans Gr-II and workmen working in various power stations of TGGENCO at CETD

White Glass plain 3 1/4 inches X 4 1/4 inches X 3mm thickness for welding screens confirms to the specification IS 5983. Certificate of conformity to the mentioned standard from the OEM should be atta

One set of seven consumables ESAB PSF 260 MIG WELDING TORCH items (Quantity, Description, Part no) as per the list of the items enclosed for the use of ESAB Auto K 400 MIG Plants Make: ESAB only .

HEAT GUN FOR PVC WELDING, 240VOLT, 50HZ, 2000 WATT, TEMPERATURE RANGE 52-630 DEGREE CENTIGRADE, AIR FLOW 150-500 LITRE/MIN, MODEL: GHG-20-63 OF BOSCH MAKE OR MODEL HG2310 OF STEINEL MAKE OR MODEL CH6

MIG/MAG Welding Torch as per the following parameters. 1) Current capacity at 60% Duty cycle (For Mixed gas): 320 to 350(Amps). 2) Cable Length: 3 meters. 3) Wire Diameter for Solid and Flux Cored: 1.

One set of Four consumables ESAB PSF 260 MIG WELDING TORCH items (Quantity, Description, Part no) as per the list of the items enclosed for the use of ESAB Auto K 400 MIG Plants Make: ESAB only .

Manufacture and supply of rectangular frame for RRU unit using MS-L angle of size 60 X 60 X 05 mm including cutting, welding, drilling of holes and finishing works with spray painting as per the drawi

HEAT GUN FOR PVC WELDING, 240VOLT, 50HZ, 2000 WATT, TEMPERATURE RANGE 52-630 DEGREE CENTIGRADE, AIR FLOW 150-500 LITRE/MIN, MODEL: GHG-20-63 OF BOSCH MAKE OR MODEL HG2310 OF STEINEL MAKE OR MODEL CH6

Manufacture and supply of rectangular frame for RRU unit using MS-L angle of size 60 X 60 X 05 mm including cutting, welding, drilling of holes and finishing works with spray painting as per the drawi

mm, Solid Carbide Drill 4 point 7 mm x 63 mm, Solid Carbide Drill 4 point 8 mm x 63 mm, Solid Carbide Drill 4 point 9 mm x 63 mm, Solid Carbide Drill 5 point 1 mm x 76 mm, Solid Carbide Drill 5 point 2 mm x 76 mm, Solid Carbide Drill 5 point 3 mm x 76 mm, Solid Carbide Drill 5 point 4 mm x 76 mm, Solid Carbide Drill 5 point 5 mm x 76 mm, Solid Carbide Drill 5 point 6 mm x 76 mm, Solid Carbide Drill 5 point 7 mm x 76 mm, Solid Carbide Drill 5 point 8 mm x 76 mm, Solid Carbide Drill 5 point 9 mm x 76 mm, Solid Carbide Drill 6 point 1 mm x 79 mm, Solid Carbide Drill 6 point 2 mm x 79 mm, Solid Carbide Drill 6 point 3 mm x 79 mm, Solid Carbide Drill 6 point 4 mm x 98 mm, Solid Carbide Drill 6 point 5 mm x 79 mm, Solid Carbide Drill 6 point 6 mm x 79 mm, Solid Carbide Drill 6 point 7 mm x 79 mm, Solid Carbide Drill 6 point 8 mm x 79 mm, Solid Carbide Drill 6 point 9 mm x 79 mm, Solid Carbide Drill 7 point 1 mm x 79 mm, Solid Carbide Drill 7 point 2 mm x 79 mm, Solid Carbide Drill 7 point 3 mm x 79 mm, Solid Carbide Drill 7 point 4 mm x 79 mm, Solid Carbide Drill 7 point 5 mm x 79 mm, Solid Carbide Drill 7 point 6 mm x 89 mm, Solid Carbide Drill 7 point 7 mm x 79 mm, Solid Carbide Drill 7 point 8 mm x 79 mm, Solid Carbide Drill 7 point 9 mm x 79 mm, Solid Carbide Drill 8 point 1 mm x 89 mm, Solid Carbide Drill 8 point 2 mm x 89 mm, Solid Carbide Drill 8 point 5 mm x 89 mm, Solid Carbide Drill 8 point 6 mm x 89 mm, Solid Carbide Drill 8 point 7 mm x 89 mm, Solid Carbide Drill 8 point 8 mm x 89 mm, Solid Carbide Drill 8 point 9 mm x 103 mm, Solid Carbide Drill 9 point 1 mm x 89 mm, Solid Carbide Drill 9 point 2 mm x 89 mm, Solid Carbide Drill 9 point 3 mm x 89 mm, Solid Carbide Drill 9 point 4 mm x 89 mm, Solid Carbide Drill 9 point 5 mm x 89 mm, Solid Carbide Drill 9 point 6 mm x 89 mm, Solid Carbide Drill 9 point 7 mm x 89 mm, Solid Carbide Drill 9 point 8 mm x 100 mm, Solid Carbide Drill 9 point 9 mm x 89 mm, Solid Carbide Drill 10 point 1 mm x 100 mm, Solid Carbide Drill 10 point 2 mm x 100 mm, Solid Carbide Drill 10 point 3 mm x 120 mm, Solid Carbide Drill 10 point 4 mm x 120 mm, Solid Carbide Drill 12 point 3 mm x 110 mm, Flat file 200 mm, Solid Carbide Drill 8 point 4 mm x 117 mm, Solid Carbide Drill 4 point 2 mm X 75 mm, TCT annular cutter length 50 mm size 12 mm, TCT annular cutter length 50 mm size 13 mm, TCT annular cutter length 50 mm size 14 mm, TCT annular cutter length 50 mm size 15 mm, TCT annular cutter length 50 mm size 16 mm, TCT annular cutter length 50 mm size 17 mm, TCT annular cutter length 50 mm size 18 mm, TCT annular cutter length 50 mm size 19 mm, TCT annular cutter length 50 mm size 20 mm, TCT annular cutter length 50 mm size 21 mm, TCT annular cutter length 50 mm size 22 mm, TCT annular cutter length 50 mm size 23 mm, TCT annular cutter length 50 mm size 24 mm, TCT annular cutter length 50 mm size 25 mm, TCT annular cutter length 50 mm size 26 mm, TCT annular cutter length 50 mm size 27 mm, TCT annular cutter length 50 mm size 28 mm, TCT annular cutter length 50 mm size 29 mm, TCT annular cutter length 50 mm size 30 mm, TCT annular cutter length 50 mm size 31 mm, TCT annular cutter length 50mm size 32 mm, TCT annular cutter length 50mm size 33 mm, TCT annular cutter length 50mm size 34 mm, TCT annular cutter length 50mm size 35 mm Bid Details 2/84

Manufacture, Supply, Fabrication and Erection of Chain link Fencing with MS angles, Barbed wire and providing basement with RR & Brick Masonry for the Srinagar and Padmatikancha Reserved forest block cluster at Srinagar / Maheshwaram Gate