Fabrication Tenders in Telangana

SRSP-II-Fabrication, Supply and Errection of Off-take shutters and cross regulaters on DBM-59 Main from Km.0.000 to 10.150 Minors & Sub Minors of Kakatiya Main Canal

TGGENCO-BTPS-Stage-II BM Div- Fabrication and Machining of certain internal parts to suit the HAD of size 200/50 Sl No. IY-080 of FD Fan-3B

Replacement of damaged AC sheet roofing with prepainted GI sheets to Fabrication shed, longwall shed and electrical indoor sheds at Area workshop, RGII area, Godavarikhani, Dist. Peddapalli, Telangana State.

KTPS V VI Stages-Civil-O M-II-Fabrication of 60Kg Glued Joints and Reconditioning of V nose, Tongue Rails, Wing rails of Turnouts at Gajulagudem Railway Bypass Lines

- Manufacture, Supply, Fabrication and Erection of Chain link Fencing with MS angles, Barbed wire and providing basement with RR & Brick Masonry for the Jinnaram and Bonthapally Reserved forest Clusters

SELECTION OF AN EVENT MANAGEMENT AGENCY FOR FABRICATION OF STALL SPACE IN CONNECTION WITH PARTICIPATION IN VARIOUS TOURISM FAIRS / MARTS AT NATIONAL LEVEL FOR THE FINANCIAL YEAR 2025-26

EXPRESSION OF INTEREST FOR IDENTIFYING THE POTENTIAL INDUSTRIES TO EXECUTE THE DESIGN, FABRICATION, INTEGRATION AND COMMISSIONING OF 1 point 6 m x 1 point 6 m TRISONIC WIND TUNNEL

FABRICATION, SUPPLY AND INSTALLATION OF OSOP MOBILE KIOSK (TROLLEY) at 16 Railway Stations (Station list enclosed) over Bengaluru Division as per the attached design and specifications under One Stati

Custom Bid for Services - 400051262 Fabrication erection and painting of 400 MT Structures for crossovers platforms approaches at NTPC Telangana Similar Category Operation and Maintenance Power House/Power Plant

Laying of Piped Drain from Vaishnavi Welding works to H.No:9-52/2 Sri Ram Nagar Colony in Ward No.20 in Peerzadiguda Municipal Corporation under Municipal General Funds/SMG 2021-22.

Replacement of superheater Headers 4A, 4B, 5 & 8 stub stool pieces and other connected welding works in Unit-X 250MW KTPS-V Stage during Annual overhaul period for the year 2023-24.

KTPS-V- BM- Service charges for Conducting Radiography (Non- Destructive Test) on Welding Joints in Pressure Parts of Unit-10 Boiler during Unit-10 Annual Overhaul Works for the year 2020-21

ROUND STEEL SHORT LINK CHAINS[NON-CALIBRATED] ELECTRIC FLASH BUTT WELDING GRADE L(3) TESTED AND HEAT TREATED FOR LIFTING PURPOSE SIZE:6 mm DIA CONFIRMING TO IS:2429 [PART 1]/87.

Ultrasonic Testing Equipment for Flash Butt/Alumino Thermit Welding Joint, as per RDSO Spec. M&C/NDT/129/2005, Rev-II, Aug 2014 or latest Offer description accepted : Digital Ultrasonic testing equipm

Involves fabrication, machining

Custom Bid for Services - Wet leasing of welders gas cutters for attending welding works of Electric locomotives at ELS Lallaguda for period of 2 years Schedule I Labour charges of Wet leasing of welders gas cutters including GST, Custom Bid for ... attending welding works ... attending welding works ... items Welding gas ...

TBS Source One V6 5 Frame Kit, Vimana 2207 1750KV 2450KV Motor, SpeedyBee Nano 2 point 4G TXCO ELRS Receiver, Gemfan Hurricane 51466 3 Blade Propeller MCK Edition, Vimana Kevlar Lipo Strap 240 and 20mm, RadioMaster Pocket Radio 2 point 4G ELRS, Vimana 21700 4000mAh 10C High Discharge Li ion Battery, Balance Lead Replacement Cable 6s JST XH, Amass XT60H Pigtail, HGLRC Hammer Mini 2 point 5dBi 5 point 8G RHCP Antenna, RunCam Phoenix 2 Special Edition V5 FPV Camera, Eachine EV800 800 and 480 FPV Goggles, AKK Race Ranger 1 point 6 Watt VTX Updated Version Initial 25mW with Optimized Pigtai, GEPRC TAKER F405 BLS 60A V2 STACK, Foxeer M 10 Q 250 GPS 5883 Compass

C100201008, C100201014, C100201020, C100201022, C100201025, C100201028, C100201032, C100201036, C100201040, C100201050, C100201063, C100502250, C100502400, C100603090, C100603160, C100603200

T0261480001, T0261480002, T0261480003, T0261480004, T0261480005, T0261480006, T0261480007, T0261480008, T0261480009

HSS high speed hand hack saw blade Type A, Jig saw blade 92 mm length, Jig saw blade 100 mm length, Ferrous metal cutting wheel, Triangular file 150mm, Flat file 150mm, Half round file 150mm, Flat file 250mm, Round file 150mm, Flat file 300mm, Square file 150mm, Square file 200mm, Square file 300mm, Half Round file 200mm, Half Round file 300mm, Round file 250mm, Round File 200mm, Round file 300mm, Triangular file 250mm, Triangular file 300mm, HSS Drill bits set 70 pcs Stanley make, HSS Thread TAP SET M10X1Point5, HSS Thread TAP SET M3X0Point5, HSS Thread TAP SET M12X1Point5, HSS Thread TAP SET M4X0Point7, HSS Thread TAP SET M6X1Point0, HSS Thread TAP SET M5X0Point8, HSS Thread TAP SET M8X1Point25, HSS Thread TAP SET M14X2Point0, HSS Thread TAP SET M16X2Point0, Solid Carbide Drill 3mm x 61 mm, Solid Carbide Drill 4 mm x 75mm, Solid Carbide Drill 5mm x 86 mm, Solid Carbide Drill 6 mm x 93 mm, Solid Carbide Drill 7 mm x 109 mm, Solid Carbide Drill 8 mm x 117 mm, Solid Carbide Drill 9 mm x 125 mm, Solid Carbide Drill 10 mm x 100 mm, Solid Carbide Drill 11 mm x 142 mm, Solid Carbide Drill 12 mm x 151 mm, Solid Carbide Drill 14 mm x 110 mm, Solid Carbide Drill 8Point4 mm x 117 mm, Solid Carbide Drill 3Point1mm x 63 mm, Solid Carbide Drill 3Point2 mm x 63 mm, Solid Carbide Drill 3Point3mm x 63 mm, Solid Carbide Drill 3Point4mm x 63 mm, Solid Carbide Drill 3Point5mm X 63 mm, Solid Carbide Drill 3Point6mm x 63 mm, Solid Carbide Drill 3Point7mm x 63 mm, Solid Carbide Drill 3Point8 mm x 63 mm, Solid Carbide Drill 3Point9 mm x 63 mm, Solid Carbide Drill 4Point1mm x 63 mm, Solid Carbide Drill 4Point2mm X 75 mm, Solid Carbide Drill 4Point3mm x 63 mm, Solid Carbide Drill 4Point4mm x 63 mm, Solid Carbide Drill 4Point6mm x 63 mm, Solid Carbide Drill 4Point7mm x 63 mm, Solid Carbide Drill Bid Number : GEM/2025/B/6515747 Dated : 23-08-2025 Bid Document 1/63 Item Category 4Point8mm x 63 mm, Solid Carbide Drill 4Point9mm x 63 mm, Solid Carbide Drill 5Point1mm x 76 mm, Solid Carbide Drill 5Point2mm x 76 mm, Solid Carbide Drill 5Point3mm x 76 mm, Solid Carbide Drill 5Point4mm x 76 mm, Solid Carbide Drill 5Point5mm x 76 mm, Solid Carbide Drill 5Point6mm x 76 mm, Solid Carbide Drill 5Point7mm x 76 mm, Solid Carbide Drill 5Point8mm x 76 mm, Solid Carbide Drill 5Point9mm x 76 mm, Solid Carbide Drill 6Point1mm x 79 mm, Solid Carbide Drill 6Point2mm x 79 mm, Solid Carbide Drill 6Point3mm x 79 mm, Solid Carbide Drill 6Point4mm x 98 mm, Solid Carbide Drill 6Point5mm x 79 mm, Solid Carbide Drill 6Point6mm x 79 mm, Solid Carbide Drill 6Point7mm x 79 mm, Solid Carbide Drill 6Point8mm x 79 mm, Solid Carbide Drill 6Point9mm x 79 mm, Solid Carbide Drill 7Point1mm x 79 mm, Solid Carbide Drill 7Point2mm x 79 mm, Solid Carbide Drill 7Point3mm x 79 mm, Solid Carbide Drill 7Point4mm x 79 mm, Solid Carbide Drill 7Point5mm x 79 mm, Solid Carbide Drill 7Point6mm x 89 mm, Solid Carbide Drill 7Point7mm x 79 mm, Solid Carbide Drill 7Point8mm x 79 mm, Solid Carbide Drill 7Point9mm x 79 mm, Solid Carbide Drill 8Point1mm x 89 mm, Solid Carbide Drill 8Point2mm x 89 mm, Solid Carbide Drill 8Point5mm x 89 mm, Solid Carbide Drill 8Point6mm x 89 mm, Solid Carbide Drill 8Point7mm x 89 mm, Solid Carbide Drill 8Point8mm x 89 mm, Solid Carbide Drill 8Point9mm x 103 mm, Solid Carbide Drill 9Point1mm x 89 mm, Solid Carbide Drill 9Point2mm x 89 mm, Solid Carbide Drill 9Point3mm x 89 mm, Solid Carbide Drill 9Point4mm x 89 mm, Solid Carbide Drill 9Point5mm x 89 mm, Solid Carbide Drill 9Point6mm x 89 mm, Solid Carbide Drill 9Point7mm x 89 mm, Solid Carbide Drill 9Point8mm x 100 mm, Solid Carbide Drill 9Point9mm x 89 mm, Solid Carbide Drill 10Point1mm x 100 mm, Solid Carbide Drill 10Point2mm x 100 mm, Solid Carbide Drill 10Point3mm x 120 mm, Solid Carbide Drill 10Point4mm x 120 mm, Solid Carbide Drill 12Point3mm x 110 mm, Flat file 200mm

KTPS-V-BM-Service charges for Conducting PAUT (Non- Destructive Test) on Welding Joints in Pressure Parts of Unit- X Boiler during Unit- X Annual Overhaul Works for the year 2026-27.-Reg

KTPS-V stage -BM-Service charges forconducting Radiography ( Non- Destructive Test) on welding joints in pressure parts of Unit-X Boiler during Unit-X Annual Overhaul works for the year 2026-27-Reg

Completion of balance Ventilation Duct Structure Support fabrication and Erection works and wall opening cutout by engaging manpower, resources and T and P materials at 4x270 MW Bhadradri Thermal Power Project.

SUPPLY, FABRICATION, ERECTION & COMMISSIONING OF REPLACE THE EXISTING PALM FIBER CYCLONE DUCTING AND BLOWER WITH NEW CYCLONE DUCTING AND BLOWER FOR OUR OIL PALM PROCESSING PLANT AT ASHWARAOPET, BHADRADRI KOTHAGUDEM

Manufacture, Supply, Fabrication and Erection of Chain link Fencing with MS angles, Barbed wire and providing basement with RR & Brick Masonry for the Wadiyaram Reserved forest Cluster at Wadiyaram / Chegunta

Providing Miscellaneous works like painting, Fabrication, errection to conveyor gantries and strengthening of crusher and other connected miscellaneous works for gantries and crusher at PKOC-IV, Manuguru, Bhadradri Kothagudem, Telangana

Designer , Fabrication and Cast in situ of Book shape Benches at Gachibowli Stadium and at Zonal Office in ward no-105,Serilingampally circle 20 in Serilingampally Zone, GHMC(item 12)

Manufacture, Supply, Fabrication and Erection of Barbed Wire Fencing with MS Angles along the boundary of HMDA land in survey No's 62 of Medipally(V), Medipally (M), Medchal-Malkajgiri District.

KTPS VII stage-CHP-MM- Fabrication, Erection & Painting of Steel Seal Plate for 5A, 5B Belt Conveyors and a portion of 6A, 6B, 7A, 7B,11,12, 13A, 13B Belt Conveyors

AWARD OF CONTRACT FOR FABRICATION AND INSTALLATION OF MAN RIDING CHAIR LIFT SYSTEM CURVE STATION ASSEMBLY REQUIRED FOR 1200MM ROPE SPACING BY PROVIDING WITH REQUIRED SPARES ON PROPRIETARY SERVICE BASIS.

Manufacture, Supply, Fabrication and Erection of Chainlink Fencing with MS Angles, Barbed Wire for the additional length for the Jalalpur Reserved forest block at Jalalpur(V), Pochampally(M), Nalgonda (Dist)

PJP - LMC - Repairs to fabrication and erection of infall regulator gear box, screw rod, nut and bolts of PJP Left Main Canal near Madepally village in Atmakur (M), Wanaparthy (Dist)

Outsourcing activity of dismantling of old bunker, Fabrication and replacement of 45T Capacity steel bunker at surface of GDK.1 Incline, RG.1 Area for a period of 1 year

Fabrication and Supply of Tree Guards for Protection of Telangana Ku Haritha Haram Trees at various Wards in Meerpet Municipal Corporation under Pattana Pragathi funds/any other funds 2020-21.

Fabrication of new bus body on the new bus chassis of model TATA LP 712/45 WB 3.3L NAC 12V BS VI Diesel for Hotlines Sub-division/Metro Central/TSTRANSCO

Design, Development, Fabrication, Assembling & Supply of LHB RMPU Electrical Panel Box of dimensions 60 inches X 32 inches X 16 inches along with Bus bar Arrangements and Cable tray fixtures.

FABRICATION, SUPPLY AND INSTALLATION OF OSOP MOBILE KIOSK (TROLLEY) at 15 Railway Stations over Bengaluru Division as per the attached design and specifications under One Station One Product (OSOP) sc

SW 1) Sanathnagar Freight Depot: Provision of welding facilities at SNAG yard and Service building on first floor on ATC hostel building. SW 2) Kazipet: Modification of Express bay shed at DLS/KZJ.

Laying of SWG line and CC road with RMC from welding shop to dead end at Jalalbaba Nagar in Ward No. 61 Attapur Div, in Rajendernagar Circle, GHMC ( Reserved for waddera /Sagara Communtties)

Outsourcing for welding of picks and Pick holders to 500 TPH Crusher-rolls at IKOCP-SRP for a period of 2 years as per the Scope of work, Terms and Conditions of NIT

Service charges for carrying out Radiography Test (non Destructive Test) of the Welding Joints in the Pressure Parts of Unit XI Boiler of KTPS VI Stage during the Annual Overhaul Period 2025 26.

CO2 Heater 110 Volts of Panasonic make part code no: YX-PDX001DMA to suit for Panasonic 400 MIG welding machine (model :YW-50KB3DAL). Make: PANASONIC Note: OEM or authorized dealer need to quo

Supply, installation and commissioning of 400 Amps IGBT Inverter-based Manual Metal Arc Welding machine to Model No. TORNADO 401 of ADOR Fontech or equivalent models of FRONIOUS or ESAB or ADOR. Weldi

Supply and installation of IGBT Based Invertor controlled power source 400 amps MIG/MAG welding plant along with servo wire feeder with inter connecting cable of 10 mtrs, Earth cable copper 10 mtrs

AA7750202021, WELDING CABLE 70SQMM CU 550-600 AMPS, AA7750202013, WELDING CABLE 50SQMM CU 400- 450 AMPS

ER70S-2, TIG welding wire

WL12-001-00189, WL12-001-00190, WL12-001-00191, WL12-001-00653, WL12-001-00083, GS70-001-00012, GS70-001-00010, GS70-001-01190, GS70-001-01191, GS70-001-00016, GS70-001-00017, CT62-200-00013, CT62- 200-00695, GS70-001-01193, CT62-200-00138, CT62-200- 00696, WL12-001-00414, GS70-001-01192, WL12-001- 00566, GS70-001-00014, GS70-001-00015

Rotary Knob Dia 31mm as per Sl No 1 in Annexure A, Rotary Knob Cover as per Sl No 2 in Annexure A, Rotary Transducer as per Sl No 3 in Annexure A, Combined Liner Carbon as per Sl No 4 in Annexure A, Contact Tip for EWM as per Sl No 5 in Annexure A, Gas Diffuser as per Sl No 6 in Annexure A, Collet chuck for EWM as per Sl No 7 in Annexure A, O-Ring EWM as per Sl No 8 in Annexure A, Solenoid Valve for TIG as per Sl No 9 in Annexure A, Tungsten Electrode as per Sl No 10 in Annexure A, Tungsten Electrode as per Sl No 11 in Annexure A, Gas diffuser as per Sl No 12 in Annexure A, Blue Cool Coolant as per Sl No 13 in Annexure A

Custom Bid for Services - Job Contract for Carrying out Miscellaneous Jobs in Fabrication and Assy Shop Planning Sections Similar Category Facility Management Service - Outcome Based Manpower Outsourcing Services - Man-days based

Design, Engineering, Supply, Manufacture, Fabrication, Installation, Testing, Commissioning And Comprehensive AMC of Vapour Recovery System For Existing Tank Lorry Filling Top Loading Facilities for product MS at Hyderabad Terminal under TAPSO