JCB, Crane & Earthmoving Tenders in Jharkhand

Please Refer ANNEXURE B in Tender Document

1. Both of water tank opening, cleaning repairing of radiator. 2. All tubes of radiator cleaning by gagging with HCL acid, K. oil. 3. New steam joint changing. 4. Missing bolts and nuts changing. 5. Leakage tubes soldering of radiator.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Damage blade arm broken plate cutting in side lower and upper size 2. New plate cutting setting and welding in side lower and upper plate. 3. Pin hole oval worn out portion welding build up as per size. 4. Arm end collar gousing and

1. Damage blade arm broken plate cutting in side lower and upper size 12x4 2. New plate cutting setting and welding in side lower and upper plate 3. Pin hole oval worn out portion welding buildup as per size

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Damage blade arm broken plate cutting inside lower and upper size 12 inchX4 ft. 2. New plate cutting setting and welding inside lower and upper plate. 3. Pin hole oval worn out portion welding built up as per size. 4. Arm end collar gousing

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Track frame cracked portion gouging. 2. Track frame welding by steel electrode. 3. Ribs cutting and welding by steel electrode.

Please Refer ANNEXURE B in Tender Document

1. Track frame cracked portion gousing. 2. Track frame welding by steel electrode. 3. Ribs cutting and welding by steel electrode. 4. Track frame diagonal broken portion gousing.

1) Top and Bottom water tank opening and refitting. 2) All tubes cleaning by gagging with Hcl Acid 3) Leakage tube repairing. 4) Testing.

1. Size of K arm pin Length 330 mmX 90 mm OD. 4 nos. 2. Size of Brace arm pin length 200 mm X 85 mm OD. 4 nos.

Please Refer ANNEXURE B in Tender Document

1. Damage blade arm broken plate cutting in side lower and upper size-12x4 2. New plate cutting setting and welding in side lower and upper plate 3. Pin hole oval worn out portion welding buildup as per size

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Broken mounting bolt of track roller assly. taken out. 2. Rethreading of female of roller mounting it. 3. Guide holder of idler assly. developing up to required shape and size.

Please Refer ANNEXURE B in Tender Document

1.Damage blade arm broken plate cutting in side lower and upper size-12x4. 2.New plate cutting setting and welding in side lower and upper plate. 3.Pin hole oval worn out portion welding buildup as per size.

1. Track frame cracked portion gouging. 2. Track frame welding by steel electrode. 3. Ribs cutting and welding by steel electrode.

1. Track frame diagonal LH and RH side broken portion gousing. 2. Track frame diagonal both side V shape cutting. 3. Track frame diagonal alignment as per size. 4. Track frame diagonal welding by steel electrode.

1. Damage blade arm broken plate cutting in side lower and upper side-12x4 2. New plate cutting, setting and welding in side lower and upper plate 3. Pin hole oval worn out portion welding build up as per size

1. New making of Pin as per sample size L 13.1/2 inch X 3.5/8 inch

1. Ball of Arm making it in original shape and size after taken out of ball from arm by gas cutter and developing of outer surface by welding and the making outer shape smooth by grinding and cracked portion welding by steel electrode.

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; REPLACEMENT OF 01 ONE NO FAILED TRAVEL MOTOR PART NO 7067L01110 WITH DIFFERENT RECON SAME PART NUMBER TRAVEL MOTOR APPLICABLE TO PC2000 8 MODEL KOMATSU HYDRA..

Repairing of 02 Nos rear both (RHS and LHS) steering cylinder of crane RT630C SL.No.406769/C80 of Kuya OCP, Bastacolla Area IX.

Complete overhauling of engine repairing of foundation and calibration of fuel pump of ACE 12 Te Crane at Tapin North OCP, Hazaribagh Area

PROVIDING SERVICES OF REPAIR/RECONDITIONING OF UNDERCARRIAGE SYSTEM OFLIEBHERR LR 1350/1 CRAWLER CRANE SL NO. 74117 DEPLOYED AT 3X800MW PVUNL PATRATU STPP

Single E-Tender on M/S TIL Limited OEM for Procurement of Spare Parts applicable for CR-120 Crane of Rajmahal Area ECL

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - MINING UNIT; CUMMINS ENGINE Model N743C of D80A12 MODEL DOZER OF BEML MAKE FOR UCIL JADUGUDA UNIT; Service Provider

Repairing of both side track frame with diagonal arms and removal of broken bolts from diagonal arms etc of BD355 Dozer SL.No. 11835 of Kuya OCP, Bastacolla Area IX

Repairing of 01 no. broken grease shaft idler yoke, trunnion, K-arm and blade arm broken bolts removal of dozer D355 Sl. No. E11841 at Tetulmari OCP, Sijua Area.

Repairing of 03 nos. Delco Remy make 24V, 100, 75 Amp Alternator assy. For BD 355 Dozer Sl. No. 11644 and 11906 and REL C650 Drill Sl. No. 6021708

Repairing of equalizer bar, lift cylinder stay, cracked brace, 01 no. blade arm, tilt cylinder and its guard and LHS lift cylinder of BD 355 dozer Sl. No. 11644

Repairing of damaged and bend engine, transmission guard -01 each and repairing of cracked K-arms with eyes, pin -02 each of DOZER Sl.No 11667of KUYA OCP ,BA-IX.

1. Operator cabin frame denting welding and straightening 2. Gate lock repairing and fitting 3. Repairing of operator seat 4. Fitment of new safety glasses with new rubber bit and rubber lock

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Cylinder leg cutting by gas. 2. Dismantling of cylinder. 3. New cylinder fitting and welding by steel electrode. 4. Swing stopper welding by steel electrode. 5. New stopper welding by steel electrode.

Custom Bid for Services - 2nd YEAROvertime Charges after 8 working HoursOptional for BTPS, Custom Bid for Services - 2nd YEAROvertime Charges after 8 working HoursOptional for RTPS, Custom Bid for Services - 2nd YEAROvertime Charges after 8 working ... EOT crane capacity ... EOT crane capacity ... EOT crane capacity ... EOT Crane capacity ... EOT crane capacity ... EOT Crane capacity ... EOT crane capacity ... EOT Crane capacity ... EOT crane capacity ... EOT crane capacity ... EOT crane capacity ... EOT Crane capacity ... EOT crane capacity ... EOT Crane capacity ... EOT crane capacity ... EOT Crane capacity ...

1. Damage blade arm broken plate cutting in side lower and upper size- 12x4 2. New plate cutting setting and welding in side lower and upper plate. 3. Pin hole oval worn out portion welding building buildup as per size