JCB, Crane & Earthmoving Tenders in Jharkhand

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Dismantling of 02 nos. complete hyd. Cylinder assly. after outside cleaning. 2. Gland portion of cylinder threading. 3. Eye cutting, welding, machining. 4. Piston welding, machining, polishing. 5. Piston rod straightening. 6. Barrel grinding,

Please Refer ANNEXURE B in Tender Document

1) New making of pin (As per sample) size Length- 13.1/2inchxOD 3.5/8 inch 08 nos.

1.Old tilt guard fitting portion worn out plate cutting/removing. 2.Providing of MS plate on top and bottom portion drilling fitting by welding. 3.Tilt guard profile making. 4.Plate cutting bending joining and welding for tilt guard making. 5.Ti

1. Broken mounting bolt of track roller assly. taken out. 2. Rethreading of female of roller mounting it. 3. Guide holder of idler assly. developing up to required shape and size.

1. Dismantling the entire air compressor. 2. Cleaning the entire parts with petrol oil and other special type of liquids. 3. Changing of failed and seized parts with new ones.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Broken transition guard dismantling. 2. Broken transition guard straightening by gas heating. 3. Transmission guard welding by steel electrode. 4. Repairing of damage battery box straitening. 5. Battery box new sheet changing.

1. Cutting the damaged head portion of the Brace Arm. 2. New Head making by new materials (New Steel Rod size 18 inch L x 6 inch OD) In steel rod complete hole making and inner portion complete thread making for

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender document

Please Refer ANNEXURE B in Tender Document

1) Ball of Arm making it in original shape and size after taken out of ball from arm by gas cutter and developing of outer surface by welding and the making outer shape smooth by grinding and cracked portion welding by steel electrode.

1. The damage structure of the all four side of the cabin straightening, rusted portion of structure cutting and new M.S sheet changing by welding. 2. The structure of roof of the cabin rusted portion cutting new sheet changing by welding.

1. Broken mounting bolt of track roller assly. take out. 2. Rethreading of female of roller mounting it.

Please Refer ANNEXURE B in Tender Document

1.Damage blade arm broken plate cutting inside lower and upper size 12X4. 2.New plate cutting, setting and welding inside lower and upper plate. 3.Pin hole oval worn out portion welding buildup as per size. 4.Arm end collar gousing and welding by

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Repairing of operator seat and fitting new safety glass of operator cabin of ACE Crane SL.No.9112868/C78 of Kuya OCP, Bastacolla Area IX.

New making of rope pulley /01set 04 nos. by steel casting and machining for RT 740B Crane of ABOCP mine of Block-II Area

Repairing of front both sides rims of tyre and boom cylinder cover lower portion portion of RT 740B crane of ABOCP Block-II Area

Repairing of failed final Drive Assy Front Right side and Front Right Side brake shoe Assy of RT 880 Crane Running at ABOCP Mines

Repairing of out Rigger Jack cylinder and steering cylinder of RT 740B crane Sl. No.-407964 running at ABOCP Mines of Block-II Area.

Repairing of Tie Road end eye both side of steering mechanism of ACE Crane C-83 SL.No. 18113C of Rajapur OCP, Bastacolla Area IX.

Repairing of self starter 24V one No. for Dozer T-11904 and alternator 24V two nos. for water tanker ws-387 and CK-300, Sl. No. 741of Gidi A Project.

Repairing of Steering control valve assembly both side both side Clutch assembly and Cabin door repairing of M/c Sl No. 104870 Model SD32W Dozer under TTK OCP Rajhara Area

Repairing of blade face Assy. arm LH AND RH chassis lift cylinder LH AND RH and universal Joint Assy. of Dozer D155 Sl. No. T- 13288 of Gidi A Project.

Supply of spare parts for LT Gear box HC-400 suitable for 50/6 Ton EOT Crane, make: Cranex as per COFMOW Drawing No. COFMOW /4797/TATA/50T/15 Items No. (1) 6007, (2) 6207. One set consist of 02 items in 02 Nos. The material shall be manufactured strictly as per OEM design and drawing, ensuring full compatibility and interchangeability with existing Cranex make LT Gear box HC-400.

Please Refer ANNEXURE B in Tender Document

1. Axle vim broken portion gousing. 2. Axle vim broken portion pressed by hyd jack. 3. Axle vim broken portion welded by steel electrode.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1 Axle vim broken portion gousing. 2 Axle vim broken portion pressed by hydraulic jack. 3 Axle vim broken portion welded by steel electrode. 4Ribs plate cutting by grounded machine. 5Ribs plate bending and welded by steel electrode.

1.Dismantling of complete hyd. Suspension assembly after cleaning from outside. 2.Repairing of barrel, welding, machining, grinding, honing and polishing. 3.Piston rod straightening and polishing. 4.Suspension assembly complete fitting and hyd.

1 Dismantling the entire air compressor 2 Cleaning the entire Parts with Petrol and Other Special type of Liquids.

1- Complete Engine Removing, Dismantling and Overhauling, Fitting also Removing Fitting in the Machine. 1 No. 2- Complete Engine Machining Block Reboring, Crank Polish etc. Shop Charge. 1 No.

Please Refer ANNEXURE B in Tender Document

1. Both side of water tank opening, cleaning repairing of radiator. 2. All tubes of radiator cleaning by gagging with HCL acid, K. oil. 3. New steam joint changing. 4. Missing bolts and nuts changing. 5. Leakage tubes soldering of radiator.

Please Refer ANNEXURE B in Tender Document

1.Blade lower side damaged base portion cutting. 2. Base portion developed by new plate cutting, setting and welding with steel electrode. 3. Hole making, cutting edge and end bit fitting. 4. Plate cutting from grounding Machine.