Industrial Machinery Tenders in Chhattisgarh

Installation of 1000 mm wide belt conveyor along 2Dip from 58L to 2D / 64L at Gayatri UG mine of RGK Sub Area of Bishrampur Area.

Reclamation of sunken floor of J3K3 near drive house including concelling the space with concrete for inpit conveyor system at Gevra Project of Gevra Area.

Renovation/ Repairing of Surface Bunker and RC Feeder along with all supporting structure of Surface Belt Conveyor of Katkona 1N2 Incline of Katkona Sub Area.

TROLLEY WHEEL, SHEAVE PULLEY, PIN AND BUSH FOR CHP CONVEYORS., PROCUREMENT OF TROLLEY WHEEL, PIN AND BUSH FOR CHP CONVEYORS. NTPC KORBA

Custom Bid for Services - Repair of Conveyor Belts with ROTOCURE RUBBER in OCSL Plant Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

Assistance in major shutdown/preventive/ breakdown mechanical maintenance works at various locations of surface conveyors, 20,000 Te. Bunker and TRS sections of New CHP for a period of 365 days on as and when required basis at KOCP.

Fabrication, erection, installation, testing and commissioning with trial run of LNT make feeder breaker 400 TPH with modification of hopper on J2 K2 conveyors to receive ROM Coal through 60 Te departmental dumper at Back up Gevra Project.

Fixing of Pick holders by welding after gouging and removing of old damaged/worn out pick/pick holders in crusher rolls of various Feeder Breakers at Mini CHP of Dipka Expansion Project.

5/8" HOSE PIPE ENGTH 400 MM FOR AUX COMPRESSOR AS PER CLW DRG NO.0/3/65/402.REF-B

IGBT Based Heavy Duty Power Source Air Plasma Cutting System with compressor (Q3) MSE Exemption for Years of Experience and Turnover

Custom Bid for Services - Capital Repair Jobs of HTB LO53 Scrap Shears and scrap Conveyors of Plate Mill Maintenance of Hot Transfer Bed of Plate Mill BED PROPER & DISCHARGING SIDE DURING CR Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Goods Transport Service – Per Trip based Service - Machinery & Equipment; Suitable Vehicle to Transport; Suitable to transport Mobile ATC Tower

Strengthening of walls of Pit Top No. (2) Renovation of Winding Engine Shed No. (1) and (2) And Boiler Shed at JKD Sub Area

PROVIDING AND FIXING OF MOUNTINGS OF LANCASHIRE BOILER NO. MP/2349/2458/2973 AT WEST JKD COLLIERY OF JHAGRAKHAND SUB AREA OF HASDEO AREA

Complete cleaning and cover lapping with soil works of Lancashire Boiler No 2349 at West Jhagrakhand Colliery of JKD Sub Area of Hasdeo Area.

Complete cleaning and cover lapping with soil works of Lancashire Boiler No MP 2458 at west jhagrakhand Colliery JKD Sub Area of Hasdeo Area.

Contract for Supply and Apply of Airseal in Boiler and Auxiliaries of Stage I and II units during 2022 24 Overhauling at NTPC SIPAT

Service contract of Insulation works in fans, duct system, APHs, MILL system, ESP and Furnace of stage-I and II boiler at NTPC Sipat

Complete cleaning and cover lapping with soil works of Lancashire Boiler No 2973 at West Jhagrakhand Colliery of JKD Sub Area of Hasdeo Area.

Custom Bid for Services - 200150030 Biennial Painting Contract for Boiler & ESP area at NTPC Kudgi Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - 200145185 LONG TERM CONTRACT FOR MAINTENANCE OF BOILER AND TURBINE AUXILIARIES Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Fabrication/repairing of worn out chute plates by dismantling removing old worn out plates and welding new plates in position of all the conveyors (C33, 34, 35, 36 of all the tipper trolley) of CHP Phase 1 Kusmunda Project Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

CVD coated 30 mm neutral insert for HYT make CNC surface wheel lathe machine LNUX 301940-16-TN 2000, Make KENNAMETAL (Brand WIDIA) or LNUX 301940 or TT2500, Make INDICARB or LNUX 301940 SN-25 grade SR

Maintenance of 1200/1000 mm wide main Double Storey (G -belt) and Mandir belt (E -belt) conveyor in Surface at West block of Churcha mine (RO)

Assistance required for day to day maintenance of haulage track line, belt conveyor and pipe line in seam C at Kapildhara UG Mine of Hasdeo Area

Cleaning of spillage coal/malma/debris/slurry below , sides of belt and loading into belt conveyor for proposed depillaring panel 4J-7 at Jhiria UG Mine.

Erection of 6.6KV overhead line from Khusrudih Substation, to feed power to new substation of AB series conveyor belt line under CHP backup of Gevra Project.

Cleaning of spillage coal and maintenance of conveyor belts i.e. D-4, D-5 and D-8 of Seam-V (Mahesh Incline) , NCPH Colliery New Mine.

Provision of settling tank for storage and discharge of mine water between bridge no. (01) and new conveyor belt to CSEB at KOCP of Kusmunda Area.

Dismantling,Transportation and installation of 800 mm belt conveyor in seam III and drilling and blasting in roof for preparation of loading point at Pandavpara Mine

Cleaning of slush / muck along the conveyor belt and at P2Q2R2 tail end near TRS of Dipka Expansion Project at Dipka Area.(For monsoon 2026-27 )

Malma cleaning and removal of spillage coal/slurry coal below surface bunker/belt conveyor/ around drive head and weigh bridge on surface at Haldibari UG Mine.

Installation, Testing and commissioning of new loading point with conveyor 50m of length(including fabrication and transportation) at CHP of Rajnagar RO Sub Area, Hasdeo Area

Structural steel and RCC foundation works for strengthening and extension of conveyor belt structure at 6 and 7 Incline at Rajgamar sub Area under Korba Area.

Work For Cleaning Of Spillage Coal, Slush, Slurry, Etc. At Various Section Of C and L Series Of Belt Conveyor Of Back Up At Gevra Project.

Maintenance of 1200/1000 mm wide main double storey (G belt) and Mandir belt (E belt) conveyor in surface at West Block of Churcha Mine (RO).

Installation of 1000 mm wide belt conveyor along 41 dip west gallery from 39LW to 70LW at Rehar UG mine, RGK Sub Area of Bishrampur Area.

Cleaning and removal of loose coal/ debris of MT-1, MT-2, 40list, IInd, IIIrd and IVth belt conveyor at Baherabandh UG Mine of Hasdeo Area.

Installation of 1200 mm wide belt conveyor (Drive head portion) along 2 dip west gallery at Gayatri UG Mine of RGK Sub Area of Bishrampur Area.

Cleaning and removal of debris from below belt conveyor of 2L,10D, 32L, 27R and 27D in UG galleries of 4A seam at Haldibari UG Mine.

Regular cleaning of spillage coal dust/slush/slurry etc including feeder breakers,associated secondary crushers and belt conveyors,steel bunkers etc of all running feeder breaker circuit at Mini CHP for a period of 180days at Dipka Expansion Project.

Assistance in mechanical maintenance and miscellaneous work like shifting/ rehandling of top rollers, bottom rollers, brackets, gas cylinder, welding machines etc. in general shift of JK, PQ, and M series of conveyors on daytoday basis of Back up GP.

Work for assistance in mechanical maintenance and miscellaneous work like shifting / re handling of Top rollers, bottom rollers, brackets, gas cylinder, welding machines etc in General Shift of C and R series of conveyors on day to day basis.

Bracing Pipe 80NB FOR BOILER SSTPS 125 NB MS ERW PIPE VSTPS MS and GIpipes Solapur and Kudgi MS pipes for ZLD system of TG Darlipali, pipesfor AC Ventilation TSTPS Kaniha, GI Pipe for Handrails Darlipali andpipes for AHP Gadarwara

Assistance for cleaning of TRS, mobile crusher, AC-4 Feeder breaker and surrounding areas of CHP phase- I, II and other miscellaneous work of CHP, Kusmunda OCP by providing manpower and suitable means

Assistance for cleaning of oversized coal/shale, lump, slush, overflown materials etc. from the TRS phase I, II and crusher of CHP, Kusmunda OCP of Kusmunda Area by providing manpower and suitable means

Custom Bid for Services - On-line sealing of leakage on Boiler & TG auxiliaries at Expansion Power plant & PP-2, NSPCL, Bhilai (SSC/25049) Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - BMC of Offsite area CW SACW RW SW MUPH Firefighting system DM PT Cooling tower Air compressors Etc of Stage 1 2 3X660MW 2X500MW units at NTPC Sipatfor the year 20232025

INPUT SHAFT WITH BEVEL WHEEL ASSEMBLY, MODEL KCN355, RATIO 201 PART NO KCN355IP102SBW103 or Equivalent, 1ST INTERMEDIATE SHAFT WITH WHEEL ASSEMBLY, MODEL SBN225, RATIO 201 PART NO SBN225IP302OW303 or Equivalent, OUTPUT SHAFT ASSEMBLY, MODELSBN225, RATIO 201 PART NO SBN225IP202 or Equivalent, INPUT SHAFT WITH MATCHING WHEEL ASSEMBLY, RATIO 201 PART NO SBN225IP102IW103 or Equivalent, CASING WITH COVER, RATIO 201 PART NO SBN225GTGB0102 or Equivalent, MODELK3 PART NO K3IPS102IG403 or Equivalent, MODELK4 PART NO K4IPS102IG403 or Equivalent

1600014864-LOWER MANTEL MN STEEL, 1600014894- UPPER MANTLE FOR PRIMARY CRUSHER, 1600014925- MANTLE FOR SECONDARY GYRATORY CRUSHER