Industrial Machinery Tenders in Chhattisgarh

Dismantling, transportation and Installation of (800mm size) Tail end drum, drum base, tail end guard, side plate/loading brackets (chute), decking plates and belt structure belt conveyor Transportation of Transformer and Transportation of armored

Annual cleaning and removal of deposited silt from existing drains and floor conveyor belt of P1Q1, P2Q2 and P3Q3 Series including cross drainage of bunker portion ( small belt) at Gevra Project of Gevra Area.

Dismantling of old delivery line and relaying of 08 nos M.S. delivery line size 8/10/12 inch dia (06 nos along the conveyor stream and 02 nos for reservoir/tankerpoint) at Kusmunda mine.

Transportation and installation of two nos. 1000mm belt conveyor along 3LN(400m length and 10R (100m length) and roof bolting in proposed 3LN and 10R dev. Distt. In seam C at Kapildhara UG Mine.

Contractual assistance required for the work of cleaning of spillage coal and maintenance of conveyor belts in underground workings of seam-V at NCPH Colliery R-6 Mine for the period of 305 days.

Annual cleaning and removal of deposited silt from existing drains and floor conveyor belt of P1Q1, P2Q2 and P3Q3 series including cross drainage of bunker portion (small belt) at Gevra Project of Gevra Area

Malma cleaning and removal of spillage coal from transfer point and below discharge point of TC2 belt and below belt conveyor of TC2, 7L, and 12D belt at 10B seam at Haldibari UG Mine.

Fabrication of Drive Head Frame for 1000 mm Belt Conveyor in Proposed 3R Sub Panel A, East Block, Churcha Mine (RO) and in Proposed CM Panel 85 LE, West Block of Churcha Mine (RO)

Installation of 2.5 MVA, 33/3.3 KV Transformer with 33 KV CT and other allied works at Newly Constructed 33/3.3 kV Substation near D1 Belt for Power Supply to CHP Belt Conveyor Motors.

Custom Bid for Services - Cleaning around belt conveyor and FBreaker AC4 along with removal of jammed shales lumps etc which obstruct operation of plant at CHP Kusmunda Project for a period of 365 days

Custom Bid for Services - Providing assistance in attending maintenance breakdown related to 06 No belt conveyors 3280 m LHD machines 05 Nos running at 13 and 14 West panels and Man riding system of Shiwani UG Mine Kalyani Sub Area, Bhatgaon Area for.. Similar Category Facility Management Service- Manpower based (Version 2) Manpower Outsourcing Services - Man-days based Manpower Outsourcing Services - Minimum wage

Complete cleaning and cover lapping with soil works of 03 nos. of Lancashire Boiler No MP 2973, MP 2458, and MP 2349 at west Jhagrakhand Colliery, JKD Sub Area of Hasdeo Area.

Complete cleaning and cover lapping with soil works of 03 nos. of Lancashire Boiler No MP 2973, MP 2458 and MP 2349 at West Jhagrakhand Colliery, JKD Sub Area of Hasdeo Area.

Design, Engineering, Supply (Main Equipment and Mandatory Spares),Erection and Commissioning of Boiler Acoustic Steam Leakage Detection(ASLD) System in Stage-1(Units 1,2 and 3) of NTPC- Barh Super ThermalPower Station

Custom Bid for Services - 200152278 CFD analysis of Boiler Flue Gas Ducting in one Unit each of ST1 and ST2 of NTPC Sipat Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - 200151357 Proposal for carrying out IOSM and MPI testing for Boiler tubes during overhauling (2026-2028) at NTPC KORBA Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - 200141091 Service contract for inspection of boiler tubes bends by AET Advanced Electromagnetic Technique during overhauling at NTPC Korba Similar Category Operation and Maintenance Power House/Power Plant

Hiring of Tippers for transportation of coal from Kurasia UG mine bunker to Dumanhill siding crusher (Kaparti Bunker), Avg.lead-6.40 Kms. Qty.9,00,000 Te Minimum TPD- 800 for a Period of 1125 days, Chirimiri Area as detailed in the NIT and BOQ.

Hiring of Pay-loader for loading of coal, Tippers for Coal Transportation from different places to different locations/ distance slabs and Mobile Crusher for crushing of coal for a period of 1095 days at Jampali OC, as detailed in NIT and BOQ.

Spring Loaded Switch for Compressor used as BLCP POS no.172- Type -SBM Type-F /TUSO/21/22/R20 as per CLW Spec. no. CLW/ES/3/0075/C

SHELL CORENA S2 P 100 FOR D&M/SWIL/FTIL COMPRESSOR OF 3 PHASE LOCOMOTIVES AS PER RDSO TC NO RDSO/2006/EL/TC/0034 [REV.4] DT 21.07.2008

Self contained drinking water cooler with non CFC refrigerant energy efficient compressor, cooling capacity-150 Ltr/hr. type storage capactity 150 Ltrs, Rate of maximum energy consumption-1550 Watt

"Oil Shell Corena Of S2 P-100 grade or Servopress 100RR of Indian Oil for Compressor VV120 of Knor- Bremse make for SIEMENS rake". as per Specn. PAC-SHELL

Supply and Installation of 1.5 Ton Split air conditioner, BEE star Rating -5 Compressor Type- Variable Speed, Cooling Capacity(100%) - 5000 W or above, Coil Material (Condensor & Evaporator) - Copper

HP.CYLINDER HEAD Dia 60 for ELGI Compressor Type TRC-1000 MN to M/s. ELGI's Drawing No. 000213020. Note: This item is used for Electric loco (WAG- 7).000213020

Preparation of site for installation of two nos. parallel belt conveyor 1200 mm and 1000 mm along Incline No. 6 (belt dip) between -3L to 18L in Seam-1 of Katkona 1 and 2 Incline.

M3460090041, M3460090035, M3460090036, M3460090037, M3460090058, M3460090059, M3460090106, M3460090087, M3460090020, M3460090022, M3460090032, M3460090096, M3460090110, M3460090073, M3460090123, M3460090078, M3460090076, M3460090125, M3460090126, M3460090128, M3460090071, M3460090014, M3460090085, M3460090003, M3460090109, M3460090130, M3460090061, M3460090108, M3460090040, M3460090008, M3460090017, M3460090023, M3460090111, M3460090119, M3460090054, M3460090027, M3460090055 Bid Number ( ) : GEM/2025/B/5790305 Dated : 06-02-2025 Bid Document 1/32

Operation And Maintenance Of Other Machines And Plants - Providing Technical Expert Services on call basis for Axial Flow Compressor (Blower) in power and blowing station at NMDC Steel Limited, Nagarnar

(Old PL: 17982601 ) CONNECTING ROD WITH CAP AND BEARING ASSEMBLY to ELGI Part No.070306600 for RR66101W Air Compressor of HHP locos [SET Consisting of : 1) CON ROD WITH CAP to ELGI Part No. 070304190 - 01 No. 2) NEEDLE ROLLER BEARING to ELGI Part No. 000903904 - 01 No. 3) CIRCLIP INTERNAL to ELGI Part No. 000917258 - 02 Nos. 4) BOLT CON ROD to ELGI Part No. 000447120 - 02 Nos. 5) NUT CASTLE to ELGI Part No. 000447130 - 02 Nos. 6) PIN SPLIT to ELGI Part No. 000965305 - 02 Nos. 7) BEARING CON ROD UPPER to ELGI Part No. 070304410 - 01 No. 8) BEARING CON ROD LOWER to ELGI Part No. 070304420 - 01 No.) ELGI Part No. 070306600 as per Drg.No. ELGI Part No.070306600 for RR66101W

(Old PL: 17982601 ) CONNECTING ROD WITH CAP AND BEARING ASSEMBLY to ELGI Part No.070306600 for RR66101W Air Compressor of HHP locos [SET Consisting of : 1) CON ROD WITH CAP to ELGI Part No. 070304190 - 01 No. 2) NEEDLE ROLLER BEARING to ELGI Part No. 000903904 - 01 No. 3) CIRCLIP INTERNAL to ELGI Part No. 000917258 - 02 Nos. 4) BOLT CON ROD to ELGI Part No. 000447120 - 02 Nos. 5) NUT CASTLE to ELGI Part No. 000447130 - 02 Nos. 6) PIN SPLIT to ELGI Part No. 000965305 - 02 Nos. 7) BEARING CON ROD UPPER to ELGI Part No. 070304410 - 01 No. 8) BEARING CON ROD LOWER to ELGI Part No. 070304420 - 01 No.) ELGI Part No. 070306600 as per Drg.No. ELGI Part No.070306600 for RR66101W

(Old PL: 17982601 ) CONNECTING ROD WITH CAP AND BEARING ASSEMBLY to ELGI Part No.070306600 for RR66101W Air Compressor of HHP locos [SET Consisting of : 1) CON ROD WITH CAP to ELGI Part No. 070304190 - 01 No. 2) NEEDLE ROLLER BEARING to ELGI Part No. 000903904 - 01 No. 3) CIRCLIP INTERNAL to ELGI Part No. 000917258 - 02 Nos. 4) BOLT CON ROD to ELGI Part No. 000447120 - 02 Nos. 5) NUT CASTLE to ELGI Part No. 000447130 - 02 Nos. 6) PIN SPLIT to ELGI Part No. 000965305 - 02 Nos. 7) BEARING CON ROD UPPER to ELGI Part No. 070304410 - 01 No. 8) BEARING CON ROD LOWER to ELGI Part No. 070304420 - 01 No.) ELGI Part No. 070306600 as per Drg.No. ELGI Part No.070306600 for RR66101W

MANPOWER OUTSOURCING AND LOGISTICS FOR MAINTENANCE AND REPAIR CONTRACT OF HEM MACHINERY - MIN WAGE Bidder Turnover (Last 3 Years) 260 Lakh (s) Experience Criteria 3 Year (s)

Temporary extension of discharge platform with additional column support structure along with walkway of TB-1 Belt Conveyor without interfering the original structures of surface bunkers required for discharging transported coal at concrete floor new

Installation of 02 Nos. of 1000mm belt conveyor at 15S/46E to 15S/63E of length 450 mtrs and 49E/15S to 49E/21S of length 160 mtrs in IVth Seam at Kurasia UG Mine.

Annual assistance jobs for cleaning and removal of deposited silt from existing drains, and floors of conveyor belt of JK series including cross drains of bunker portion (small belt) at Gevra Project of Gevra Area.

Installation of 1000mm belt conveyor along 17Dip/16Dip from 16LS to 28LS and 28LS from -16 Dip to -36D galleries for (LHCM Panel) of 28LS in seam C at Kurja UG Mine of Hasdeo Area

Construction of Cement Concrete coal transportation road from near W.B. No. (2) to TRS, Phase - (I) including box culvert across the conveyor belt near Satarlata chowk at KOCP of Kusmunda Area. (With five year maintenance)

Installation of 04 Nos. of 1000mm conveyor belts, after transportation of materials for the same from different places in UG and surface to installation site fordepillaring panels in Seam-III of Vijay West UG Mine.

Annual assistance jobs for clearning and removal of deposited silt from existing drains, and floors of conveyor belt of JK series including cross drains of bunker portion (small belt) at Gevra Project of Gevra Area

Installation of 1000mm belt conveyor along 1Dip from 11L to 40L and from 40L from 1Dip to 47D in proposed depillaring panel 39LN (LHCM panel) in seam A at Kurja UG Mine of Hasdeo Area.

Dismantling, Transportation and Installation of 1000mm Belt Conveyor and Haulage Track line and erection of Stone dust barrier in 16LE and 24DE Dev. District in V-Top Seam at Baherabandh U.G. Mine of Hasdeo Area.

Transportation and Installation of 1000mm wide belt conveyor from 71X/5L to 71X/4L, 71X/4L to 78X/4LW and 78X/4LW to 5L/78X in Shivpur Block at West Block of Churcha Mine (RO).

Installation of 1000mm belt conveyor and their periodical extension and shortening of proposed depillaring panel 30LS in seam A and (-) 21Rise (LHCM panel) in seam C at Kurja UG Mine for Ten month time period.

Main Conveyor Belt for FRM, Plasser Part No. RE30.325, Size: 40000X850X10 mm, Type- Open End as per Specification No. SECR/ENGG/TM/NGP/S/SPEC/CONV. Make: Plasser, Dunlop, Nirlon, MRF, MR, Virshubh, Biswas, Jagriti.

work for dismantling of L and T make feeder breaker along with secondary F/B No- 17 and fabrication, erection, installation and commissioning of same at M5 / M6 conveyor belt of Back-Up, Gevra project.

Replacement of Old and Damaged steel Structure n painting of gantry/conveyor structures and vertical support of column, replacement of damage sheet with new profile sheet and repairing of structure as detailed in tender documents.

Cleaning and removal of spillage coal from transfer point and below discharge point of -2L/10D, -18L/10D, 10D/-32LN and 22D/-32L belt and below belt conveyor of 4A seam at Haldibari UG Mine.

Facility Management Services - LumpSum Based - Dumanhill CHP Sding; Cleaning of spillage coal and maintenance of 1200mm conveyor belts for 365 days at Dumanhill CHP siding of Kurasia Sub Area; Consumables to be provided by buyer

Facility Management Services - LumpSum Based - Dumanhill Railway Siding; Cleaning of spillage coal and maintenance of 1200mm conveyor belts for 365 days at Dumanhill CHP siding of Kurasia Sub Area; Consumables to be provided by buyer

Unbranded Hydrochloric Acid (V3) Conforming to IS 265 7647-01-0, Unbranded Hydrochloric Acid (V3) Conforming to IS 265 7647-01-0 Boiler water grade (BW) As per clause 5.1 of IS 265