Inspection, Testing & Audit Tenders in Gujarat

Calibration Services - Mechanical, Electrical, Thermal; Pressure and Vacuum, Force, Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle, Temperature, Resistance, Density, Pressure; NABL Labs; Lab

Custom Bid for Services - OUTSOURCING OF PROFESSIONAL SERVICES TOWARDS FIRE SAFETY AUDIT FOLLOWED BY DEFECT RECTIFICATION/INSTALLATION OF FIRE EXTINGUISHING EQUIPMENT FOR BOTH HIRED WAREHOUSE AT CGSD PORBANDAR Similar Category Operation And Maintenance Of Fire Fighting System Hiring of Safety Consultant

Work of Road Safety measures based on Road safety audit report of existing road from km.384/00 to 454/405 and 356/905 to 384/00 section of NH 56 Alirajpur Chhotaudepur Bodeli Naswadi on NH56 in the SoG

Repair, Testing and Calibration of 4 Nos. Woodward PGPL Governor

Calibration Services - Electrical; Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle, Resistance, Temperature; NABL Labs; Hybrid (detailed in scope of work)

Calibration Services - Mechanical, Electrical; Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle; Any other Government Approved Labs/Service Provider; Hybrid (detailed in scope of work)

SRPH326195-RAPID KITS- SALMONELLA IGM&IGG: 1. SHOULD BE BASED ON LATERAL FLOW IMMUNOASSAY. 2. SHOULD HAVE IN BUILT QUALITY CONTROL BAND OR DOT. 3. SHOULD HAVE SHORT INTERPRETATION TIME NOT MORE THAN 3

Calibration Services - CALIBRATION OF PAMAS S40(CONTAMINATION TESTER)OIL PARTICLE COUNTER SENSOR; AS PER SCOPE OF WORK; AS PER SCOPE OF WORK; AS PER SCOPE OF WORK

Black body calibration of Infrared Thermometry Equipment. Range: upto 500 degree celceous detailed description as per attached Technical Specification Sl. No.-8. Valid calibration certificate with One

Custom Bid for Services - Rate Contract for Calibration of Electrical Measuring Instruments and Protective relays for Driling Rigs Cambay Asset for three years Similar Category Calibration Services

PORTABLE DIGITAL ULTRASONIC FLAW DETECTOR WITH STANDARD ACCESSORIES AND SPARES AS PER RDSO SPECIFICATION NO.M&C/NDT/125/2004, REV.II JANUARY 2017.

Portable Digital Ultrasonic Flaw detector as per RDSO spec.No M&C/NDT/125/2004/Rev.2 Jan/2017 or latest. Self make

Custom Bid for Services - Appointment of Material Testing Laboratory for testing of Material for Civil construction work under Samagra ShikshaKutch District 3rd Attempt

C/o office building for Export Inspection Agency at Sola-Theltej, Ahmedabad including water supply, Sanitary Installations, Drainage, Electrical Installations & Development works. SH: Additional work in third floor lab area. SW: Providing Audio Video system.

Custom Bid for Services - Lining up Of An Internationally Recognized Inspection Agency For The Work Of Survey Of Unloading Of Crude Oil From Tankers Discharging On Account Of IOCL Mundra At Adani Ports SEZ Mundra

Van Super Structure Integrated Container Fabrication of Bus Body for Calibration

JC24IPS300-Calibration and Servicing of Cyclops 390L Pyrometer at Gujarat Refinery.

Custom Bid for Services - Repair and Calibration of voltmeter and ammeter

Custom Bid for Services - Repair and fitment of Nagman Calibration Display

Custom Bid for Services - Calibration and Fitments of Tank Level Sensors

Calibration Services - DEBRIS TESTER; DEBRIS TESTER; OM AUTHORIZED CHANNEL PARTNER; Lab

Custom Bid for Services - JG23EST364 Calibration of tanks at Gujarat Refinery

Custom Bid for Services - Storage tank calibration by Legal Metrology department

Calibration Services - Electrical; DECIBLE METER; NABL Labs, Any other Government Approved Labs/Service Provider; Buyer premises (onsite)

Custom Bid for Services - HIRING OF NDT SERVICES FOR INSPECTION OF VARIOUS PIPELINES, TANKS, GAS AFTER COOLER FANS PRICE TO BE QUOTED BY BIDDER ON GEM PORTAL ON LUMP-SUM BASIS INCLUDING APPLICABLE GST Similar Category Support Services

Testing Service for On-Board/Commissioned Equipment Instrument related to Plant - NDT; Eddy Current Testing facility, Leak Testing Facility, Magnetic Particle Testing, Penetrant Testing Facility, Radiography Testing Facility, Ultrasonic Testing Fac..

Custom Bid for Services - Calibration and Maintenance of Pressure Relieving Devices or Pressure Safety Valves for GAIL Hazira, Custom Bid for Services - Calibration and Maintenance of Pressure Relieving Devices or Pressure Safety Valves for GAIL ... Category Calibration Services ... Services Calibration Services

Calibration Services - Mechanical, Electrical, Thermal, As attached in Documents; Voltage, Current, Power (AC/DC), Force, Temperature, Pressure, Resistance, As attached in Documents; NABL Labs; Hybrid (detailed in scope of work)

Calibration Services - Mechanical, Electrical; Dimension, Mass and Volume, Pressure and Vacuum, Force, Speed & Acceleration, Hardness & impact, Density and Viscosity, Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle, Resistance, ..

Custom Bid for Services - Hiring services for calibration and maintenance of Gas Detectors installed in CPF Gandhar for 3 years Similar Category Repair and Overhauling Service Calibration Services

Custom Bid for Services - LOT NUMBER 1 WESTERN REGION FOR ULTRASONIC THICKNESS GAUGING VISUAL INSPECTION OF ABOVE GROUND PIPING AND INSPECTION OF PRESSURE VESSELS AT BPCL PIPELINE LOCATIONS REFER TO SERIAL NUMBER 1 TO 14 OF BILL OF QUANTITY, Custom ... of Third -Party ... Third- Party Inspection Agency Maintenance ... of Third -Party ... Third- Party Inspection Agency Maintenance ... of Third -Party ... Third- Party Inspection Agency Maintenance ... of Third -Party ... Third- Party Inspection Agency Maintenance ... of Third -Party ... Third- Party Inspection Agency Maintenance ...

Structural steel work near TLFG, Main Gate, Surprise check tower, Calibration tower

Calibration Services - Mechanical, Electrical, Thermal, Fluid flow; Dimension, Mass and Volume, Pressure and Vacuum, Force, Speed & Acceleration, Hardness & impact, Voltage, Current, Power (AC/DC), Frequency, Power Factor, Phase Angle, Resistance, Te..

Calibration Services - Mechanical, Electrical; Frequency, Power Factor, Phase Angle, Resistance, Temperature, Voltage, Current, Power (AC/DC); NABL Labs, Research Designs and Standards Organisation, Ministry of Railways; Hybrid (detailed in scope of ..

Conducting Third Party Fire Safety Audit Cum Fire Adequacy Report and Monitoring of Working Environment at Rolling Stock workshop, Dahod, Western Railway as per provisions of Rule 12(B) of The Gujarat Factories Rules, 1963. QTY.: - as per annexure, for Two year.

Residual Design, Detailed Engineering, Including Supply, And Installation With Third Party Inspection, Testing, Commissioning Of Electrical And Instrumentation Items Inclusive Of AMC For The Provision Of Pipeline Receipt And Road Loading Facilities

FLUORESCENT MAGNETIC POWDER (WATER Based) FOR WET MAGNETIC PARTICLE EXAMINATION AS PER RDSO SPEC. NO. M & C/NDT/109/(Rev 1) MARCH 2007.

Custom Bid for Services - Hiring of Services for Inspection NDT Hydro Testing and Certification of Horton Spheres for LPG Storage at CTF Ankleshwar

Custom Bid for Services - Hiring of NDT Servicesinspection of Tubular for a period of three years for various Onshore Work Centers through GeM

Custom Bid for Services - 9030C26B66 Advanced NDT inspection of Pipelines under Culvert/road crossings/dyke crossings using LRUT Technique Similar Category Support Services

Calibration of Gauges and instrument for PBL Coast Guard bases -Bhubaneshwar for 3 years, Calibration of Gauges and instrument for PBL Coast Guard bases -Chennai for 3 years, Calibration of Gauges and instrument for PBL Coast Guard bases -Ernakulam ... years, Calibration of ...

Calibration Services - Mechanical, Fluid flow, Thermal; Dimension, Temperature, Turbidity meter, Ph meter, Conductivity meter, DO meter, UV visible spectrometer; NABL Labs, Any other Government Approved Labs/Service Provider; Hybrid (detailed in sc..

Custom Bid for Services - testing & calibration of measuring instruments for surface group, ONGC, Ahmedabad Similar Category Calibration Services Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Custom Bid for Services - PRESSURE TRANSMITTER, PRESSURE GAUGE AND PVRV TESTING SERVICES Similar Category Calibration Services

Repair and Overhauling Service - CALIBRATION OF CRANES AND LOAD TEST AT MIN MAX BOOM LENGTH; CALIBRATION OF CRANES AND LOAD TEST AT MIN MAX BOOM LENGTH; No; Buyer Premises

Calibration of Breath Analyzer. Make - Tayaltech. Detail of BA as per Annexure-1 As per P.O No. 86226003101192 dated - 08.08.22 Accepted Make/Brand OEM calibration. (Including all transportation/co

HIGH SPEED STEEL HAND HACKSAW BLADE SIZE 300 MM X 12.5 MM X 0.63 MM 14 TPI TO IS 2594/77. Nos. FIRM'S OFFER MAKE/BRAND:BIPICO

BAND SAW BLADE- BI-METAL BAND SAW BLADE SIZE-LENGTH4850 X WIDTH 27 X T 0.9 X10/14 TPI IN WELDED COIL M42 GRADE. Make: BIPICO.

Bolt Special Manifold to Expansion Joint 1/2 inch X 20 TPI X 2 inch long to EMD Part No.8287827. Make-TVS, Unbrako, Caparo, Bimco.

Three Year Rate Contract for Calibration of Meters and Protective Relay (Q3)