Inspection, Testing & Audit Tenders in Maharashtra

P.V. Expansion (Angle) moulding Size - 75x52x3x2000 mm long to N.E. Rly. Drg. No. SK-1457/C, Alt. 2, Fig. 2, item - 3, colour - As per Drg. Note - Material testing should be as per RDSO Specn. No. RDS

DIATRO DILUENTS, DIATRO LYSE, DIATRO CLEAN, QUALITY CONTROL– NORMAL COMPATIBLE WITH ABACUS 380 HEMATOLOGY ANALYZER

Custom Bid for Services - CALIBRATION OF OPGD PGD PORTABLE LEL DETECTOR QTY 1292, Custom Bid for Services - Breakdown OR EMERGENCY VISIT QTY 60, Custom Bid for Services - OEM EXPERT VISIT ON CALL BASIS QTY 12

NOTICE INVITING E-TENDER FOR WITNESSING OF HYDRO TESTING , CARRY OUT NDT TESTING, AND CERTIFICATION OF ANHYDROUS STORAGE TANKS FOR MMA, DMA, AND TMA STORAGE TANKS AND PSV IN AMINES PLANTS IN CGP AT RCF THAL.

Piping,Painting, Insulation,NDT, Chemical Cleaning, Electrical, Instrumentation, Misc. Civil and Structural Works, etc. including supply of materials on Sub-contract basis in connection with Composite Works for PDH Unit for GAIL Usar PDH-PP Project

Dye Penetrant test (Liquid Penetrant Test) consumable consisting of Penetrant, Cleaner and Developer in ratio 1:2:3. As per RDSO Spec. No. M&C/NDT/105/2001. Packed in aerosol can capacity 300 gm & 400

Nickel-Chromium Test Panels as per RDSO specification No. RDSO/M&C/NDT/106(Rev-1) having crack depth of 10 and 30 micron on panel. Make : EISHIN KAGAKU CO. JAPAN , MEGNAFLUX with Crack Profile Phot

VNR8A062 Wheel Flange. Make-EECI. Suitable for EEC make Digital ultrasonic testing equipment for Testing of Rails and Welds, DRTs (B-Scan) as per RDSO specification no. M&C/NDT/130/2007(B-Scan) Rev II

Supply of NDT low voltage electric fuse non indicating type fuse as per IRS:S-78/92 round edge 14 mm dia 51 mm length, Rating 0.6 Amp. ( Condition- Supply should be accompanied with OEM acceptance tes

SET OF FLUORECENT DYE PENETRANT KIT FOR ZYGLO TESTING TO RDSO SPEC. NO. M&C/NDT/105/2001. SET CONSISTING OF 02 ITEMS. (1) WATER SOLUBLE FLUOROSCENT DYE PENETRANT TYPE 1, METHOD-A, SENSITIVITY LEVEL-3

Calibration Services - Load testing of load lifting appliances; LOAD TESTING OF LOAD LIFTING APPLIANCES VIZ CHAIN PULLEY BLOCKS, RATCHET PULLEY BLOCK, QTY 2000NOS; FORM11 TO BE PROVIDED AFTER TESTING; Buyer premises (onsite), Calibration Services - ... (onsite), Calibration Services ... (.., Calibration Services ...

Custom Bid for Services - Outsourcing of Consultancy Service for NABL Accreditation of Calibration Lab, Radiography Facility and ETF Lab at NAI (Karanja) for 03 Years Similar Category Hiring of Consultancy Services - Percentage based

NON COMPREHENSIVE ARC FOR ON-SITE PERIODIC CALIBRATION OF AMMONIA GAS DETECTORS AND CHLORINE DETECTOR, AT HEAVY WATER PLANT, ON OPEN TENDER BASIS, FOR TWO YEARS

FUEL JUMPER BOLT -HEXAGONAL HEAD 3/8'' 16 TPI (UNC)X1-1/2"LONG THREAD LENGTH 1''( FORGED& ROLL THREADED) TO DLW PT NO.15031135 TPE-13-0044(SL NO.22)ALT NO' u ' MATERIAL SPECN ;-(1)IS ;1367(PT.III )CLA

HT socket headed cap screw of grade BS 2470 of size 3/8" x 16 tpi x 1-3/4" length of make TVS, LPS , UNBRAKO , POOJA , PFL MAKE ONLY . ACCEPTED MAKE: UNBRAKO HSN 73181500 EXCESS TO ORD QTY WILL NOT

High tensile hexagonal head bolt with nut of size 3/8 UNC X 1 inch long X 16 TPI with One spring washer & one plain washer of grade 8. make TVS / PFL / UNBREKO / DFL ONLY. Dealer should supply with v

Hex.Hd.BOLT 1/2"-13 TPI(UNC)x1- 5/8" LONG,THREAD LENGTH 1-1/4" TO DLW DRG NO.TPE-13-0044 (SL.NO.38) ALT.NO.'t' or Latest AND TO PART.NO.15016146 Material specn:- IS:1367 (PT:III) class 8.8 (OR) BS 176

HIGH TENSILE, HEXAGONAL HEAD BOLT 3/4" -10 TPI (BSW) x 2-1/4 " LONG FULLY THREADED 1-1/8" ACROSS FLAT 15/32" HEAD THICKNESS WITH 1/8" FILLET RADIUS OF SHANK AND HEAD,THREAD SHOULD BE ROLLED ANDCONFIRM

Water Jumper Bolt-Hex. Head 1/2"-13 TPI(UNC)x1-1/2" LONG, THREAD LENGTH 1-1/4" (Forged &Roll Threaded) to DLW PT.No.15032139 & Drg No.TPE- 13-0044, ALT.No. 'u' (Sl.No.37). Material Spec. (1)IS:1367(PT

HIGH TENSILE HEXAGONAL HEAD BOLT OF SIZE 5/8 INCH DIA X 11 TPI X 1 3/4 INCH LONG WITH SUITABLE NYLOCK NUT & ONE SPRING WASHER OF TVS / LPS / UNBRAKO ONLY. Firms Offer: --do-- DFL Make, HSN Code: 7318

BOLTS HIGH TENSILE HEXAGONAL HEAD 5/16" X 1.5" LONG 18 TPI THREADS UP TO 1" LENGTH WITH ONE HEXAGONAL HEAD HIGH TENSILE NUT AND 2 PLAIN FLAT WASHER OD-1", ID-3/8" AND THICKNESS 1/8" AND RECTANGULAR .S

Bolts high tensile hexagonal head bolt 5/16 " X 1 1/2 " long 18 TPI thread up to 1 " length with suitable 2 plain flat washers having outer dia of 7/8 " (22mm), one spring washer and one hexagonal h

Hex.Head BOLT 1/2"-13 TPI(UNC) x2" long,THREAD LENGTH 1-1/4" TO DLW DRG NO.TPE-13-0044{SL.NO.40} ALT NO.'u' AND TO PART.NO. 15032176. Material specification : 1. IS:1367 (PT.III) class 8.8 (or) BS 176

SET OF ITEMS, SET CONSISTS OF TWO ITEMS AS DETAILS BELOW: (1) BOLT HEX HEAD 7/16 INCH - 14 TPI X 2 - 1/2 INCH LONG AIR DUCT TO TURBOCHARGER MOUNTING AS PER EMD PART NO.454934 AND DLW PT.NO.19013036.,

Set of items, set consists of two items as detailed below: (1) Nut hex jam 7/16 inch - 20 TPI, as per EMD PT.NO.272131 AND DLW PT.NO.19350181, QTY - 01 no. (2) Elbow tube 90 degree, as per EMD PT.NO

BOLTS HIGH TENSILE HEXAGONAL HEAD 5/16" X 1.5" LONG 18 TPI THREADS UP TO 1" LENGTH WITH ONE HEXAGONAL HEAD HIGH TENSILE NUT AND 2 PLAIN FLAT WASHER OD-1", ID-3/8" AND THICKNESS 1/8" AND RECTANGULAR .S

Set of items for EPD and HOD connection, set consisting of three items as detailed below :(1) Screw Socket head cap No. 10 - 24 TPI x 1-1/2 inch and EMD Pt.No.147115 and DLW Pt.No.19150064, Qty: 2 Nos

Supply installation testing and commissioning of load cells Sensors transducers of 50 Ton weighing calibration tank at gravimetric laboratory under NHP for CWPRS Pune 24

Custom Bid for Services - Repair and Calibration of Portable Romer Arm Sr No - 7325SEI-6435-UC Similar Category Repair and Overhauling Service

Custom Bid for Services - RFP FOR THREE YEAR RATE CONTRACT FOR REMOVAL REPAIR CALIBRATION FITMENT COMMISSIONING OF ROCKWIN FLOWMETERS ONBOARD IN SM

Repairing, painting, fixing grills and other civil works of NABL (National Accreditation Board for testing and calibration Laboratories) at Sillewara under BSSA.

ARC for Testing and Calibration of Relays, Meters etc. in various Plants for the year 2021-23 at RCF Ltd., Chembur, Mumbai

REPAIR/ REPLACEMENT OF ADVANCE RELAY,CALIBRATION OF RELAY AND CAPACITORS PANELS AND MISC WORK AT RA AND DEPOT AREA UNDER GE PULGAON

Adjustable Type Air Spring Height Measuring Gauges (GO & NO GO) As per Drawing No. SK-ASG-1/2019 supply with calibration certificate.

Adjustable Type Air Spring Height Measuring Gauges (GO & NO GO) As per Drawing No. SK- ASG-1/2019 supply with calibration certificate.

DIGITAL NECK CALIPER WITH WARRANTY AND CALIBRATION CERTIFICATE Range: 0-150 mm Accuracy: 0.03 mm Make/Brand: Mitutoyo/Baker/Bowers or Equivalent

Digital Vernier caliper Range: 0-300 mm LC : 0.001mm with calibration certificate and as per technical specification attached. Accepted Make: PRECISION GERMANY

reference step block (10 steps from 01mm to 10mm thickness )of M.S material with wooden box with NABL calibration certificate. Make: EECI

Supply and Commissioning of Cab Meter Calibration Unit as per Technical Specification attached as Annexure -A. Special condition attached as Annexure-B.

Meter Calibration Test unit (TM Voltmeter/Ammeter Test Panel and others as per Specifications attached.) . With suitable test bench. make/ Brand- SLAZER

Calibration Gas standard mixture for dissolved Gas analyser (Canister of 0.5 Ltr. Water capacity having 10 Ltr. Gas at 20 Bar pressure).

ABG Calibration Solution-2. S 1830, Code No: 944-129. Pack size- 1 x 200 ml. Qty- 12 Packs. (AMI 24-25)

GAUSS METER(DIGITAL), RANGE: 1 TO 20000 GAUSS WITH HALL PROBE, HAND HELD BATTERY OPERATED WITH LCD WITH TEST AND CALIBRATION CERTIFICATE.

Custom Bid for Services - Total lumpsum cost for Calibration and Servicing of Pressure Safety Valve PSV at NH Asset of ONGC Ltd

CALIBRATION STANDARD CONOSTAN STAND 521+K, 100PPM,200GM PART NO. CS- 21-100-200GMS CONTAINER OR EQUIVALENT SUITABLE FOR LUBE OIL SPECTROMETER.

Custom Bid for Services - Installation of FTCs in GAIL Mumbai region Similar Category Design Installation and Maintenance of Educational Lab Calibration Services

Custom Bid for Services - 200128771 Biennial Contract for On site calibration of coal Lab equipments for NABL and Critical equipments of LDO

Custom Bid for Services - Hiring of services for fabrication of steel coupons from oil & gas pipeline API 5LX Similar Category Calibration Services

Custom Bid for Services - ARC for testing Calibration of HTLT panel mounted protection relays and measuring instruments for 2 Yrs at PHBPLParadip

Custom Bid for Services - 138 CALIBRATION OF VARIOUS LABORATORY GLASS WARES AND EQUIPMENTS FOR NABL ISOIEC 17025 2017 AT RCF TROMBAY UNIT