Inspection, Testing & Audit Tenders in Maharashtra

Custom Bid for Services - 2000148359 BMC of Onsite Calibration of Coal lab Equipments Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Hiring of Services for Calibration of field Instruments in LPGCSU C2C3 APU and Cogeneration Area of Uran Plant

Custom Bid for Services - Hiring of services for Testing and Calibration of Numerical protection relays installed at OGT and PLQP HPHT Asset

Custom Bid for Services - Servicing stamping and calibration of mechanical weighing balances listed at Annexure A for first year, Custom Bid for Services - Servicing stamping and calibration of Electronic weighing balances listed at Annexure B for ... and calibration of ... and calibration of ... and Calibration of ... and Calibration of ... and Calibration of ...

Li-ion Rechargeable Battery Pack (14.4 V [Li-ion Rechargeable Battery Pack (14.4 Volts/ 4 AH) for UFD machine of M/s Modsonic model Arya-1R as per RDSO Spec: M&C/NDT/125/2004, Rev-II.]

BNC CONNECTOR CABLE 2 METRE TO 2.5 METRE LONG AS PER RDSO/LKO's SPECIFICATION NO. M&C/NDT/125/2004, REV-II AND JAN 2017 (CLAUSE NO. 7) MANUFACTURED BY EECI/MUMBAI OR MODSONIC/ AHMEDABAD.THIS IS STANDA

VNR8A088 DRT Wear shoe (GF, NG). Make-EECI. Suitable for EEC make Digital ultrasonic testing equipment for Testing of Rails and Welds, DRTs (B-Scan) as per RDSO specification no. M&C/NDT/130/2007(B-Sc

A set of Nickel-Chromium Test panels as per RDSO Spec: RDSO/M&C/NDT/106 (Rev-1) having crack depth of 20,30 and 50 micron on individual panels Make: EISHIN KAGAKU CO.JAPAN OR EQUIVALENT with factory

Custom Bid for Services - Carrying out Hyd Pressure testing NDT wall thickness and Safety valve testing of Air tanks in various HEMMs and greasing and Air inflation compressors of Mungoli OCM Similar Category Repair and Overhauling Service

Custom Bid for Services - Modification of door housing preparation of drawing material testing fabrication erection of MS shielding door lead shielding of duct piping and associated work at WIP WMD BARC Trombay Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Calibration Services - As per document attached; As per document attached; Any other Government Approved Labs Service Provider, State Govt Labs, NABL Labs, As per document attached; Buyer premises (onsite)

ICP Calibration standard - 8 components-100mg/l each of Au; Lr; Os; Pd; Pt; Re; Rh; Ru in Hcl 5%, ICP Calibration standard-28 components - 100 mg/l each of AI, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, MISA Standard 4- Alkali, Alkaline Earth, Non-Transition Group-16 components - 100mg/l each of AI; As;

Custom Bid for Services - Hiring of 1 no E vehicle like XUV 400 EV on 12 hrs basis 100 km per day average running for the period of 3 years for use under Quality Control Department Wani Area with provision of 01driver with intermittent rest Similar Category Vehicle Hiring Service - Per Vehicle-Day basis

Facility Management Services - Lump Sum Based - Industrial; Assistance during NDT of old primary reformer tubes in expansion yard at RCF AS PER SOW AND Quantum of job; Consumables to be provided by service provider (inclusive in contract cost)

Set of MPT kit consisting of (1) pre mixed black magnetic particle as per RDSO/M&C/NDT/109 (Rev- 2 ) OCT-2020 (Wet method ) in oil media in 500 ml dispenser operating aerosol /container (Net content 4

Red Dye Penetrant Kit consisting of Red Dye Penetrant, Remover/Cleaner and Developer in the ratio 1:4:4 as per RDSO Specification No. M and C/NDT/105/2001 of April'2001 or latest. i. Visibility: Type-

Developer for Use in Dye Penetrant Testing as per RDSO Specification No.M&C/NDT/105/2001 or Latest in form of Spary Can Volume 500ml or 525 ml. with net Content Volume 400ml. Must have expiry period o

Set of MPT kit consisting of (1) pre mixed black magnetic particle as per RDSO/M&C/NDT/109 (Rev- 2 ) OCT-2020 (Wet method ) in oil media in 500 ml dispenser operating aerosol /container (Net content 4

Set of MPT kit consisting of (1) pre mixed black magnetic particle as per RDSO/M&C/NDT/109 (Rev- 2 ) OCT-2020 (Wet method ) in oil media in 500 ml dispenser operating aerosol /container (Net content 4

Red Dye Penetrant Kit consisting of Red Dye Penetrant, Remover/Cleaner and Developer in the ratio 1:4:4 as per RDSO Specification No. M and C/NDT/105/2001 of April'2001 or latest. i. Visibility: Type-

VNPRFA38 TR-0-44, 0 deg. Probe 4 MHz. Make-EECI. Suitable for EEC make Digital ultrasonic testing equipment for testing of Rails and Welds, DRTs (B-Scan) as per RDSO specification no. M&C/NDT/130/2007

Non aqueous Developer (Spray type application), Form-D in Aerosol Cans of Capacity 500 ml, Net Content 400 ml, conforming to IS:12889/1989 and RDSO Spec No. M&C/NDT 105/2001 used in Dye Penetrant tes

DRY MAGNETIC POWDER(RED), VISIBLE TYPE IN 1 KG PACKING AS PER RDSO SPECIFICATION RDSO/M&C/NDT/109(REV.2).OCT 2000. THE POWDER IS FREE FROM OIL,GREASE,DIRT,SAND & MERCURY MAKE BRAND: AUTOMAG RD 7

Repair and Maintenance of Plant/Systems/Equipments - Manufacturing Unit; Fabrication Installation Pipe Support NDT radiography of various CS LTCS and SS pipe lines with isolation valve from various tapping points to new Amm1 storage tank in RCF Trom..

Microprocessor based Conductivity/TDS Meter (03 Point Calibration) as per specification enclosed. Make: Labman LMCM/Galaxy lab TDS-100/ Electronics lndia or Equivalent.

Custom Bid for Services - ANNUAL MAINTENANCE AND CALIBRATION OF GAS CHROMATOGRAPH FOR TWO YEARS Similar Category Customized AMC/CMC for Pre-owned Products

Biennial Non Comprehensive Maintenance Contract Periodically Half Yearly Preventive Maintenance Service Repair Calibration of Multi Gas Detectors and Oxygen Detector at East Yard.

Custom Bid for Services - Repairing Servicing Overhauling Lab Equipments Qty 19 Nos with Calibration NABL Accreditation Certificate Similar Category Repair and Overhauling Service

Servicing, testing and calibration of protective devices at various pumping stations with oil filtration and testing of 750 KVA transformer under Central Zone.

Contract for comprehensive maintenance, calibration of Lab equipments and testing of treated and drinking water samples at STP Laboratory, Western Sector, Anushaktinagar, Mumbai.

Work of repair, servicing and testing of 22 kV VCB along with calibration of relay of VCB no. 02 at Bhandup Pumping station.

Biennial Maintenance Contract of 1No. 1400Ton capacity Hydraulic Roller Press Machine (Make Ms. Haeusleur, Switzerland) which includes Breakdown maintenance, Calibration of the machine.

DIGITAL 3-LEG INSIDE MICROMETER , SIZE-225-250 MM,L.C.-0.001 MM WITH CALIBRATION CERTIFICATE (NABL CERTIFIED LAB), MAKE-MITUTOYO/TESA OR SIMILAR

Supply of Arc Validator suitable for calibration of all types of welding sets in service at Furnishing Division; as per the specification enclosed.

Calibration of Digital Weighing machine Digitone Electronic scale brand with load Capacity- 500kgs Model No.DGP500calibration & Stamping of Government of Maharashtra , Metrology department. calibrati

TORQUE WRENCH, PTW-160, RANGE 05 TO 23 KGM WITH 1/2" SQUARE DRIVE ALONG WITH CALIBRATION CERTIFICATE TAPARIA, BRITOOL, MITUTOYO MAKE ONLY.

Customized AMC/CMC for Pre-owned Products - AMC Along With Calibration of 100kN Servo Hydraulic Machine; INSTRON; Annual Maintenance Contract (AMC); Quarterly; No

Custom Bid for Services - AMC and Calibration of Equipments and Machinery of bitumen Lab Similar Category Customized AMC/CMC for Pre-owned Products

Hexagonal head cap screw 3/8-16 TPI (UNI) x 1" long full thread to DLW part no. 15031093 (TVS, UNBRAKO,LPS,POOJA & GKW Make only) TPE-13-0044 (SL NO. 19) Alt no. 'n' material specn: BS 1768- Gr.'S' th

Bolt Hex head 1/2 inch X 13 TPI X 1-1/2 inches long cadmium coated with suitable nut (1/2 inch - 13TPI), two flat washers (1/2 inch) and one spring washer (1/2 inch). Material BS 1768, Gr.SAE-5. Speci

SET OF ITEM CONSISTING OF(1) (A)HEX. HD. BOLT 1"-8 TPI X 3" LONG WITH ONE LOCK WASHER, BOLT TO MATL. SPECN. AND PROPERTY CLASS 1.S.:1367 (PART-III) CLASS 10.9 / B.S:1768 GRADE "V" / SAE - GRADE.8. USE

SET OF THREAD PITCH GUAGES CONSITS OF SIZES 1. 4-42 TPI INCH/METRIC - 01 NO. 2. 0.4-7 MM - 01 No. 3. 0.35-6 MM- 01 No. MAKE - MITUTOYO OR BAKE OR KRISTER OR INSIZE OR ITS EQUIVALENT BRANDS NOTE :- *-S

Construction of Office cum Laboratory building including customized office & lab furniture, associated Civil & E&M services for Export Inspection Agency (EIA), Ratnagiri, Maharashtra. Sub Head - Hiring of inspection vehicle for day to day site activities on monthly basis for Assistant Engineer (Civil)-III under office of Executive Engineer & Senior Manager (Civil)-II, CPWD, Bambolim, Goa during 2025-26

P.V. expansion (Angle) moulding size - 70 x 26 x 3 x 2000 mm long to N.E.Rly. Drg. No. SK - 1457/C Alt. 2, Fig. 2 item 2, colour - As per Drg. Note :- Material testing should be as per RDSO Specn. No.

SERVICE CONTRACT FOR CALIBRATION OF HUMIDITY TRANSMITTER WITH M/S MECORD SYSTEMS OF GTG, IN SGP, AT RCF LTD THAL, ON PROPRIETARY BASIS, FOR ONE YEAR

OK

Black Magnetic Powder Oil Based for wet for crack detection by MPI Method in packing of 1 Kg or 500 grams as per RDSO Specification No. RDSO Specification No. RDSO/M&C/NDT/109/2007, (Rev-2), October 2

KIT OF DYE RENETRANT TEST FLOW CHECK IN 400 ML. CANE KIT COMPRISING 3 ITEMS 09 NOS.(1)PENETRANT -01 NO. CANE (2) CLEANER 04 NOS. CANE (3) DEVELOPER-04 NOS. CANE RDSO SPECIFICATION NO.M/C/NDT/105/2001

KIT OF DYE RENETRANT TEST FLOW CHECK IN 400 ML. CANE KIT COMPRISING 3 ITEMS 09 NOS.(1)PENETRANT -01 NO. CANE (2) CLEANER 04 NOS. CANE (3) DEVELOPER-04 NOS. CANE RDSO SPECIFICATION NO.M/C/NDT/105/2001

Grey coloured dry magnetic powder for magnetic particle testing as per the following. 1) Spec. BS4069/IS 6410 2) ASTM E - 709 3) RDSO M & C/NDT/8/91/Appd 4) Colour - Grey (dry powder) Note: 1) The sup