Inspection, Testing & Audit Tenders in Maharashtra

Custom Bid for Services - 2223 1215 Total price including all applicable taxes duties for Replacement job of 06 nos guy wire ropes including turn bucklesfittings and NDT inspection of Methanol Flare Stack at RCF Trombay unit AS PER SOW

Custom Bid for Services - 2223 971 Total price including all applicable taxes duties for Fabrication Installation Pipe Support NDT Radiography Pipe Blowing Drying and Hydro Testing of various CS and SS pipe lines with isolation valve and all drain..

Custom Bid for Services - hiring of consultancy services for interpretation of NDT reports for providing Fit for Service FFS report of piping and vessels of MH NH and BS Asset Similar Category Hiring Of Agency For ISO Certification Service

Notice inviting e-tender for lining up of contract for ISO calibration of Measuring Instruments in various plants of RCF Thal at Partys works.

M and R to Shahad Water Works...Monitoring Data Logging and Calibration of flow meters on B.G. Main Trunk Main in Ambernath, Dombivali Zone

Custom Bid for Services - AMC and Calibration of Rolling Thin Film Oven of Bitumen Lab Similar Category Customized AMC/CMC for Pre-owned Products

Calibration Services - Mechanical; PROVISIONING OF CBM TOOLS EQUIPMENT FOR SRILANKA NAVY; Any other Government Approved Labs/Service Provider; Hybrid (detailed in scope of work)

Furnishing, Instatement, Calibration, And Consecration Of Uninterruptible Power Supply Apparatuses Within Disparate Health Establishments Overseen By the Public Health Department, Thane Municipal Corporation, Thane

Repairing, calibration and provision of accessories of various measuring instruments in 25kV AC & 22/2.2kV PSI system between Churchgate-Virar of Mumbai suburban section.

RTC (Repairs, Testing, and Calibration) of Fuel Injector Nozzles of TATA 1112 mini compactor vehicles of D Ward and Agripada Garage under Ex.Eng.Tr.(City)

Deputation of Service Engineer for Supervision of Calibration and Testing of Gravimetric Feeders of U1 and U2 during Overhauling and Shutdown at NTPC Solapur

DIGIMATIC OUTSIDE MICROMETER, RANGE: 300-400 mm, LEAST COUNT OF 0.001 mm ALONG WITH SETTING ROD. BRAND- PRECISION GERMANY WITH TEST CERTIFICATE & CALIBRATION CERTIFICATE.

RECTANGULAR KINEMATIC VISCOMETER BATH(DIGITAL) FOR 06 TUBES WITH STANDARD ACCESSORIES AND NABL CALIBRATION CERTIFICATE ,SPECIFICATIONS AS PER ANNEXURE -1 ATTACHED MAKE:- UNITECH SALES

TORQUE MASTER STEEL RATCHET TYPE TORQUE WRENCH, RANGE 200-815NM, ALONG WITH CALIBRATION CERTIFICATE (MATERIAL SHOULD BE SUPPLY ALONG WITH NABL LAB T.C.& G.C)

Digital outside micrometer (carbide tipped measuring faces) with ratchet stop. range 125-150mm LC. 0.001mm with calibration certificate. make Mitutoyo/ Forbes/ Tesa or equivalent.

Supply, installation & commissioning of Air receiver assy with Accessories, 3 m3, 7.0 kg/cm2g. with calibration and test certificate part no - 94.109.847.00 Make- Kirloskar

GO & NO GO Thread ring gauge Size-M 16 x 1.5 mm pitch with calibration certificate (NABL CERTIFIED LAB),Make-HIP/BAKER or similar

Digital Microprocessor based 05 point calibration (PH Meter) as per specification enclosed. MAKE- Labman LMPH/ Labtronics/ Stark Instrument or equivalent. Accepted Make: Labman LMPH

Portable Digital Push Pull gauge/Digital Force gauge of range 0-20 Kgf LCD display with NABL calibration certificate similar to LUTRON FG 20.

Repair and Maintenance of Plant/Systems/Equipments - Industry Unit; 192 CALIBRATION OF GAS DETECTORS INSTALLED IN VARIOUS PLANTS OF RCF TROMBAY UNIT; Service Provider

Custom Bid for Services - REPAIRS OF ALLOY ANALYZERS ON OEM BASIS AT BPCL MR Similar Category Hiring of Consultancy Services - Percentage based Calibration Services

Custom Bid for Services - Repair and calibration of Fuel pump and 04 nos injectors of Simpson make engine Similar Category Repair and Overhauling Service

Custom Bid for Services - AMC and Calibration of Specialised Equipments and Machinery of Concrete Lab Similar Category Customized AMC/CMC for Pre-owned Products

Custom Bid for Services - Total price for LEL Meter Calibration Honeywell BW Max XT II Refer SCC And SOW for more details mentioned in Tender document Lumpsum charges to Be Quoted for Qty 25 Nos, Custom Bid for Services - Total price for LEL Meter ... Meter Calibration Ventis ... Category Calibration Services ... Services Calibration Services ... Services Calibration Services ... Services Calibration Services ... Services Calibration Services

Custom Bid for Services - For calibration and servicing of Digital Vibration Meter at Amalgamated Inder Kamptee Deep OCM Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

1)Digital CBC Height Gauge Accuracy of Gauge, Least count 0.1 mm, measuring range 900 to 1140mm, Accuracy +-0.2mm with 03 hr continues working time battery backup along with hard storage and transportation case, user manual and calibration ... with calibration certificate ...

1)Digital CBC Height Gauge Accuracy of Gauge, Least count 0.1 mm, measuring range 900 to 1140mm, Accuracy +-0.2mm with 03 hr continues working time battery backup along with hard storage and transportation case, user manual and calibration ... with calibration certificate ...

1)Digital CBC Height Gauge Accuracy of Gauge, Least count 0.1 mm, measuring range 900 to 1140mm, Accuracy +-0.2mm with 03 hr continues working time battery backup along with hard storage and transportation case, user manual and calibration ... with calibration certificate ...

BIENNIAL MAINTAINANCE CONTRACT FOR CALIBRATION AND REPAIRING OF HONEYWELL MAKE PORTABLE EXPLOSIVE METERS, IN FIRE AND SAFETY, AT RCF LTD. THAL, ON PROPRIETARY BASIS, FOR TWO YEARS

Periodical USFD testing of rail joints/welds over Ratnagiri region of KRCL between Km 0/800 to km 378/100 using Contractor's RDSO approved "Digital Ultrasonic RAIL tester, operator and Quality Assurance Plan (QAP), as per Indian Railway Standard specification for Ultrasonic testing of rail/ welds (Provisional), Revised 2022 (with latest amendment) and Manual for Ultrasonic testing of rails and welds, Revised 2022 (with latest correction slip) issued by RDSO" (Computer No.69570 Rates quoted shall be excluding GST. GST shall be payable as applicable).

Periodical USFD testing of rail joints/welds over Ratnagiri region of KRCL between Km 0/800 to km 378/100 using Contractor's RDSO approved "Digital Ultrasonic RAIL tester, operator and Quality Assurance Plan (QAP), as per Indian Railway Standard specification for Ultrasonic testing of rail/ welds (Provisional), Revised 2022 (with latest amendment) and Manual for Ultrasonic testing of rails and welds, Revised 2022 (with latest correction slip) issued by RDSO" (Computer No.69570 Rates quoted shall be excluding GST. GST shall be payable as applicable).

Testing Calibration certification of 3 Ton EOT Cranes at chlorination Plant Panjrapur as per factory rule for the year 2024 25 and 2025 26

HEXAGONAL HEAD CAP SCREW SIZE 1/2 INCH - 13 TPI , LENGTH 3 1/2 INCH, THREAD LENGTH 1 1/4 INCH AND ACROSS FLAT 3/4 INCH ON A TRANSERVER HOLE ON THE HEAD DIA 1/8 INCH. MAKE : TVS, UNB, UNK, PFL, LPS onl

HEX, HEAD CAP SCREW 1/2 INCHS-- 13 TPI X 2.1/4 INCHS LONG to DLW DRG. No. TPE-13 - 0044, alt. 'u' or (SL. No. 41, PT. NO.15032188) DLW SPEC. No. MISC-109, SH1 OF 4, With annexure A & B Firm's acce

Set of 02 Items Consisting of (1) Bolt Hex Head of Size 5/8" X 11 TPI UNC X 1-1/2 Inch Long to Part No: 271558 and DLW Part No.19016190,Qty 1344 Nos (2) Washer Special - Damper to EMD part No.9532904

BOLT, 1/4" X 20 TPI X 1" LONG, THREAD LENGTH 13/16" , UNC - 2A, STEEL CL- 8.8 TO IS: 1367, ZINC PLATED TO S.RLY DRG NO. SR/D/BT-105/B2 Firms' offer: Same as above, Make/Brand: Unbrako" make mfg. by M/

74.36.03.029.5 - PIPE SS GRTP304L SMLS S80S 20NB, 74.36.23.029.5 - PIPE SS GRTP316L SMLS S80S 20NB, 74.36.19.029.5 - PIPE SS GRTP321 PE SMLS S80S 20NB, 74.36.23.036.5 - PIPE SS GRTP316L SMLS S40S 25NB, 74.36.19.036.5 - PIPE SS GRTP321 SMLS TPI S40S ... SMLS TPI S40S ... SMLS TPI S40S ... SMLS TPI S10S ... SMLS TPI S10S ... CL1 TPI S10S ... SMLS TPI S40S ... SMLS TPI S40S ... SMLS TPI S40S

EMPANELMENT OF CONSULTANCY FIRMS FOR VARIOUS CONSULTANCY SERVICES SUCH AS ARCHITECTURE, STRUCTURAL DESIGN, STRUCTURAL AUDIT, GEOTECHNICAL INVESTIGATIONS, STATUTORY APPROVALS OF PLANNING AUTHORITY, WATER SUPPLY, SANITARY AND ELECTRICAL SERVICE, LANDSC

Custom Bid for Services - NON DESTRUCTIVE AND DESTRUCTIVE TESTING FOR HYDROCARBON PIPELINE SUPPORT STRUCTURES OF MAHARASHTRA REGION TERMINALS Similar Category Vulnerability and Penetration Testing Selection of Laboratories for Testing of ... Products/ Material Testing Service ...

Custom Bid for Services - Structural stability test including NDT from NABL accredited agency for 03 Excavators BE 1000 SL NO 10199 ex 1200 sl no 2004 AND 2007, 24 Nos CAT Dumpers 5 nos D155 Dozers 04 nos RECP 650 Drills 04 nos Water Sprinkler 01 no.. Similar Category Testing Service for On-Board/Commissioned Equipment/Instrument related to Plant

Custom Bid for Services - 200147954 Calibration of Energy meters installed at NTPC Kawas for NTPC 1020-Kawas Gas Power Project, Custom Bid for Services - 200150464Calibration of Energy meters installed at NTPC Gadarwara, Custom Bid for Services - ... for calibration of ...

Filtration of transformer Insulating Oil Servicing of OCBs Calibration of IDMT Relays including Coordination etc Servicing of Transformers and ACBs

boot high ankle leather dvs Boot High Ankle Leather Dvs ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Confirming to IND/TC/3844(a) standards (Specification issued by ... of Quality Assurance , ...

boot high ankle leather dvs MSME Exemption For Years Of Experience And Turnover Yes Boot High Ankle Leather Dvs ( 164 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SPECIFICATION ... of Quality Assurance , ...

Custom Bid for Services - Non Comprehensive AMC and Calibration for Universal Testing Machine Capacity 10 Ton Similar Category Customized AMC/CMC for Pre-owned Products

Tender for Purchase of CNG Dispenser Prover Calibration kit 2 Nos. for the stamping and verification of dispensers at Nanded and Nizamabad GA for MNGL

Supply Installation Testing and Commissioning of Laboratory Calibrator for Rainfall Sensor Calibration Equipment along with Requisite Software and Training under NHP for CWPRS Pune 24

Digital Buffer Height Gauges for measurement of Buffer Height of Trains as per attached specification. NOTE:Firm to furnish calibration certificate traceable to NABL accredited labs.

Supply, Installation, Commissioning and Operation and maintenance services of Mobile Continuous Automated Air Quality Monitoring Station for Calibration of Sensors and Ozone Monitoring for MPCB

Non-Comprehensive Annual Maintenance Contract for ITW-BISS make 100KN UTM for three years and Calibration of 100KN,10KN Load Cell and cross head displacement