Inspection, Testing & Audit Tenders in Maharashtra

Supply, installation and commissioning of Portable Hand Held X-Ray Fluorescence Analyser with AERB certification and built in standard calibration as per technical specification attached.

AIR PRESSSURE GAUGE DIAL SIZE- 4 INCH, WORKING PRESSURE 0-14 KG/CM2, BODY- MS/SS SUITABLE FOR COMPRESSED AIR WITH WARRANTY AND CALIBRATION CERTIFICATE.

Handheld BREATH ANALYZER, with printer, as per RDSO Spec No. RDSO/2015/EL/SPEC/0119(Rev2), dt:15.03.2018, with Calibration Certificate from NABL accredited Lab.

ABSOLUTE Digimatic Indicator ID-CX, Range 12.7 of Mitutoyo 543-390B or equivalent Note: Firm has to submit calibration certificate from any NABL approved Lab

Automatic Scratch Hardness Tester, confirms to IS: 101, Part 5, Section 2 of latest version as per attached Annexure 'A' with NABL Laboratory Calibration Certificate

Digital insulation tester with test certificate Range upto 2 G ohm, Voltage -1KV along with calibration certificate and traceability. Make - Motwane/Multiscope or Sanyo only.

Hand Held Digital Multimeter as per Specification . Calibration certificate from NABL accredited laboratory or certificate having traceability to NPL to be submitted along with material.

Compact Electronic Wheel Diameter Gauge with a calibration certificate. Detailed specification as per annexure attached. Firm?s Offered and accepted make : Make/Brand - ELECTRONICA/SELF

ABSOLUTE DIGIMATIC DEPTH GAUGE OF SIZE 0-150MM, RESOLUTION - 0.001MM, SIMILAR TO MITUTOYO CODE 571-201-30 ALONG WITH CALIBRATION CERTIFICATE FROM NABL APPROVED LAB.

Digital buffer height gauge of Supply with Calibration Certificate. Detailed technical specifications attach as 'Annexure-A'. ACCEPTDELECTRONICA/SELF and Similar ACCEPTED MAKE/BRAND: ELECTRONICA/SELF.

Custom Bid for Services - Commissioning Supply and License of Remote Calibration and Data logging Facility for Analysers at RGPPL as per MPCB and CPCB Guidelines

Repair and Calibration of Coil Spring Scragging and Load Deflection Testing Machine, Cap. 20 Tons, Asset No. 35(a) through OEM on Single tender basis.

Repair and Calibration of Coil Spring Scragging and Load Deflection Testing Machine, Cap. 20 Tons, Asset No. 35(a) through OEM on Single tender basis.

Custom Bid for Services - REPAIR AND SERVICE OF HEIDHENAIN MAKE LINEAR SCALE AND READER FRO DMG CNC MACHINE AT HAL NASIK Similar Category Calibration Services

Custom Bid for Services - Generator Relay testing for GT2 and GT3 during shutdown at BPCL Mumbai Refinery Similar Category Interpretation Services Support Services Calibration Services

Hiring of Consultants - Milestone/Deliverable Based - Subject Matter Experts; Hiring consultant for Accreditation of proficiency provider and SRM for ICAR-CIRCOT Calibration Cotton; Yes; Onsite

300062527, 300062540, 300062514, 300062515, 300062517, 300062520, 300116846, 300130861, 300130862, 300062522, 300062525, 300062518, 300062519, 300062539, 300093111, 300093086, 300093097, 300093098, 300093099, 300093100, 300093101, 300093102, 300093103, 300093104, 300093105, 300093109, 300093110, 300093112, 300094288, 300127750, 300062526, 300062531, 300062532, 300062533, 300132823, 300132824, 300132825, 300062565, 300062562, 300062563, 300132535, 300132536, 300089343, 300089347, 300106009, 300089345

Custom Bid for Services - Servicing and Calibration of Mechanical Weighing Balances listed at Annexure A for first year Qty in SET, Custom Bid for Services - Servicing and Calibration of Electronic Weighing Balances listed at Annexure B for first ... and Calibration of ... and Calibration of ... and Calibration of ... and Calibration of ... and Calibration of ...

boot high ankle leather dvs Boot High Ankle Leather Dvs ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Confirming to IND/TC/3844(a) standards (Specification issued by ... of Quality Assurance , ...

boot high ankle leather dvs MSME Exemption For Years Of Experience And Turnover Yes Boot High Ankle Leather Dvs ( 164 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SPECIFICATION ... of Quality Assurance , ...

HACKSAW BLADE 300 MM X 12.70 MM X 0.63 MM, 18 TPI

Set of fasteners consist of following it [Set of fasteners consist of following items: 1. Hex head bolt size 5/16 inch x 18 TPI x 1-3/4, Grade 8 (thread length 1 inch), Qty/set. - 01 no, 2. Nut 5/16 inchx 18 TPI , Qty/set. - 01 no, 3. Spring washer 5/16 inch, thickness 1.5 mm Qty/set. - 01 no, 4. Flat washer ID 5/16 inch, OD 3/4 inch, thickness 1.5 mm, Qty/set. - 02 nos. All the set of material should be lead plated. Note: A test certificate (TC) & Guarantee certificate (GC) is also required from supplier. ]

Filtration of transformer Insulating Oil Servicing of OCBs Calibration of IDMT Relays including Coordination etc and Servicing of Transformers and ACBs installed at various locations at Dr Babasaheb Ambedkar International Airport Nagpur

Filtration of transformer Insulating Oil Servicing of OCBs Calibration of IDMT Relays including Coordination etc and Servicing of Transformers and ACBs installed at various locations at Dr Babasaheb Ambedkar International Airport Nagpur

Fluoresent Penetrant as per RDSO specifi [Fluoresent Penetrant as per RDSO specification M and C/NDT/105/2001. i.Visibility: Type I- Fluorescent Dye. ii. Wash- ability: Method A-Water washable. iii. Sensitivity Level: Level 2-medium. iv. Developers: Form a- Dry Powder.]

Custom Bid for Services - 2324 1136 Fabrication Installation Pipe Support NDT Radiography Pipe Blowing Drying and Hydro Testing of various CS and SS pipe lines with isolation valve and all drains and vents for NU plant in RCF Trombay unit AS PER SOW..

Rate Contract for a period of 2 (Two) years for calibration of instruments installed at MRS, DRS, GG, DCS at various sites of MNGL Ramnagara GA

Testing Calibration set up for Telemetry GSM GPRS Supply installation Testing and Commissioning of Cable and Antenna Analyzer with Accessories under NHP at CWPRS Pune 24

Rate Contract for a period of 2 years for calibration of instruments installed at MRS, DRS, Cascades and Dispensers at various sites of MNGL Pune GA.

M and R to EDS in Taloja Industrial Area Repairing of 380 KVA DG set along with fuel pump calibration at EDS Taloja Phase -II Pumphouse

Custom Bid for Services - Repair Servicing and Calibration of Video Measuring Machine VMM Model No Inspec Vista 3020 CNC Sr No IV 3020 C XE 011

Custom Bid for Services - COMPREHENSIVE MAINTENANCE CONTRACT AND CALIBRATION OF HARTRIDGE HA 4500 SPM TEST STAND FOR DIESEL AND GAS TURBINES DEPARTMENT AT NAVAL DOCKYARD MUMBAI

BRC for requisition for Servicing, Repair and calibration of Fuel Pump and Injectors of Main engines and DG sets on board MDL Tugs, Launches and Dredger

NOTICE INVITING E-TENDER FOR WITNESSING OF TESTING / CALIBRATION OF SAFETY VALVES OF STORAGE TANKS IN CGP AT RCF THAL AND ACQUIRING TEST CERTIFICATES FROM PESO

Dead Weight Pressure Gauge Tested along with standard accessories with one year NABL calibration certificate as per Annexure 'A' Make -DW-12-RAVIKA Instruments or Similar

Digital Disk Brake Caliper having following specification: 1)Range:0-125mm, 2) Accuracy: +-0.05mm, 3) Resolution:0.01mm, 4) Battery :CR 2032,Coolant & fluid resistant:IP54. Calibration Certificat

DIAL TENSION GAUGE RANGE- 5-50 gm (ZERO CENTRE WITH STOPPER) AND LEAST COUNT 01 gm WITH CALIBRATION CERTIFICATE ALONG WITH TRACEABILITY FROM NABL ACCREDITED LAB.

Steel Setting Ring: Nominal Dia: 250.000 mm, Tolerance between the nominal Dia and actual diameter:+-0.007mm, Roundness/Cylindricity-0.0014mm. Calibration certificate from NABL accredited laboratory w

Dial Tension Gauge Range- 5-50 gm (Zero centre with stopper) with calibration certificate along with Traceability. Make- Mitutoyo, Blue Steel or Rishita. (Shop No.06)

150 micron Brass sieve with Pan along with calibration certificate from NABL accredited laboratories with traceability. Qty: 02 Nos, MAKE: PILOT/HOSOKAWA/TYLER/KHUSHBOO. Make: PILOT.

Outside Digital Micrometer ,175-200 mm with least count 0.001mm. ( Accuracy +/- 0.001 mm) Make:- Mitutoyo or Tesa or mLabs with Calibration certificate by NABL/ILAC /OEM

ANALOG TYPE HAND DRIVEN 1000V, 2000 MEGA OHM INSULATION TESTER MEGGER WITH METAL BODY, TESTING LEAD, MINIMUM 1 YEAR WARRANTY AND CALIBRATION CERTIFICATE. HSN CODE- 90303390.

Digital Outside Micrometer (Carbide Tipped measuring Faces)with Ratchet stop. Range:125-150mm.Resolution-0.001mm,with calibration certificate traceable to national standard Make: Mitutoyo MODLE:293-25

MINIPROF or optical RAIL PROFILE MEASURING Equipment with PDA/Tablet with warranty & Comprehensive Annual maintenance charges with annual calibration as per specification No. TM/SM- 323

Annual Maintenance Contract (AMC) for servicing,repairing and calibration of Ultrasonic Flaw Detector Machine (UFDM) - Make Electronic and Engineering Co. (I)Ltd. Model Digiscan DS-333

Customized AMC/CMC for Pre-owned Products - AMC and calibration of Hexagon make portable 3d CMM; Hexagon; Comprehensive Maintenance Contract (CMC); As per tender documents; Yes

Calibration Services - As per the attached ATC document; As per the attached ATC document; As per the attached ATC document; As per the attached ATC document

Custom Bid for Services - Comprehensive Annual Maintenance Contract CAMC of Fuel Injection Pump Calibration Machine for a period of three years at Diesel loco shed Kurla

Customized AMC/CMC for Pre-owned Products - Comprehensive AMC & Calibration of 4 nos of CMM machine; Hexagon; Comprehensive Maintenance Contract (CMC); As per tender documents; No

Customized AMC/CMC for Pre-owned Products - AMC and Calibration Charges for FARO make 3D CMM; FARO; Annual Maintenance Contract (AMC); As per tender documents; Yes