Inspection, Testing & Audit Tenders in Punjab

SOCKET HEAD CAP SCREW UNC 1/2"X2.50"X 13 TPI GREAD 10.90. DRAWING NO:138293alt g. ONLY CLW APPROVED BRAND:TVS/UNBRAKO/G.K.W Firm offered make: UNBRAKO/TVS

Custom Bid for Services - one time maintenance and calibration of 30 ton weigh bridge

Calibration Services - As per SOW; As per SOW; As per SOW; As per SOW

HIGH SPEED STEEL HAND HACKSAW BLADE SIZE 300 MM X 12.5 MM X 0.63 MM 14 TPI TO IS 2594/77. Nos. FIRM'S OFFER MAKE/BRAND:- ultra tools ONLY.

BOLT HEX HEAD 3/8 inch - 16 TPI X 1-1/2 inch long TO DLW PART NO.19012056 and DLW DRG NO.179843 alt- Ea. FIRM'S OFFER: UNB

END WALL SLIDING DOOR COMPLETE TO RCF'S DRG. NO.LW56350, ALT. NO. h. ACCEPTED MAKE- KALSI AUTOMATIC DOOR , TPI INSPECTION ADDRESS - M/SKALSI AUTOMATIC DOOR SYSTEMS PRIVATE LIMITED, VILLAGE- RAYIAN ,

Custom Bid for Services - epairing Calibration of SCOPE make CRM 100 kit, Custom Bid for Services - testing leads

Custom Bid for Services - Servicing Calibration and Certification of 06 Nos TestersBag strength Testing Machine

Custom Bid for Services - Onsite Calibration of Semi Anechoic Chamber SAC FOR EMI EMC testing

Custom Bid for Services - Repair and calibration of Megger make Tan delta Kit Delta 4000

CALIBRATION OF PORTABLE FUEL CELL SENSOR-BASED BREATH ANALYZER TAYAL TECH and Replacement of Batteries

Sets of -(i) Hex head bolt of size 5/8" (Dia.) x 11 TPI x 0.4" (length) and (ii) Washers of I.D. = 17.34 mm, O.D. = 29 mm & thickness 3 mm

HTS HEX HEAD BOLTS OF SIZE 5/8" X 11 TPI/UNC X 1-1/4" LONG OF MAKE TVS/UNBRAKO ONLY (Material - Steel, Specification: GM 280-M) Make:OWN MAKE-UNB

Calibration & Two Point alarm level setting of Fixed Toxic Gas Detectors, Supply of Ionization Sensor, Supply of HCL Sensor, Supply of Particulate Filter

Calibration Services - breath alcohol analyser; Mass and Volume; NABL Labs; Hybrid (detailed in scope of work)

Calibration Services - Fluid flow; Density and Viscosity; Any other Government Approved Labs/Service Provider, ATF QUALITY CHECK LAB; Lab

stainless steel bucket Stainless Steel Bucket ( 42 ) Technical Specifications Specification Specification Name Values Allowed Values Conformity Conformity to Specification CQA(Gs)/SS/5521(a) of Quality Assurance (General Stores), Ministry of Defence (DGQA), Kanpur - Test Report Details Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number and Date ( Not a part of biddable parameter) 171031022/171031007 002/11/2017 - Name and Address of the Lab spectro research Lab ventures (P) Ltd . G- Bajrangbali industrial area near panki site - IV KANPUR - Material Material of Buckets Stainless Steel Sheets Grade designation X04Cr19Ni.9 of IS: 5522 latest Stainless Steel Sheets Grade designation X04Cr19Ni.9 of IS: 5522 latest, Stainless Steel Sheets Grade designation X07Cr18Ni.9 of IS: 5522 latest 1/3 Capacity Nominal Capacity (liter) 18 6, 18 Physical Characteristics Height (Nominal Size) of Buckets (ml) 300 215, 300 Lid Without Lid With Lid, Without Lid Sheet Thickness (mm) As per Specification IS : 4768 latest - Shape/Design and Dimension As per drawing mentioned in the specification No.CQA(GS)/SS/5520 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kunal Singla N 143107, cp no 4, new amritsar military station, khasa 42 15 EMD Required No ePBG Required No

"HIGH SPEED STEEL HACKSAW BLADES(HAND)SIZE 300 X 12.5 X 0.63 MM(12" X 1/2" X 0.02")WITH 24 TPI CONFORMING TO SPECN. 2594/1977." Accepted Make/Brand: Ultra Tools.

Comprehensive AMC and Calibration of 01 nos. electronic weighbridges for 02 years at Rail Coach Factory Kapurthala.

Calibration Services - XYZTEC Condor Sigma; Lead IntegrityMicro Torsion test system; MCUBE Technologies Pvt Ltd; Buyer premises (onsite)

Calibration Services - Fluid flow; CONTAMINATION PARTICLE COUNTS IN MICRON; Any other Government Approved Labs Service Provider; Lab

SOCKET HEAD CAP SCREW UNC 1/2"X3.50"X 13 TPI GREAD 10.90. DRAWING NO:138299 alt B. Only Approved CLW Brand: TVS/UN-BRAKO/G K W. Firm offered make: UNBRAKO/TVS

Cap screw hex head size 1 Inches - 8 TPI x 4 Inches long,DLW drg 2P11369 - 128 (Supply in Mfg's original pre inspection certificate & packing along with certificate.) Firms Offer : Make/Brand - BIMC

Repair and Overhauling Service - REPAIR AND CALIBRATION OF CB ANALYZER HISAC ULTIMA SR NO 301500AB748 AT JALANDHAR; SCOPE; Yes; Buyer Premises, Repair and Overhauling Service - CALIBRATION OF DCRM ULTIMA 06Ch; SCOPE; Yes; Buyer Premises, Repair and ... - CALIBRATION OF ...

Calibration Services - PARTICLE COUNTER; PARTICLE COUNTER; PAMAS PARTICLE COUNTERS INDIA PVT LTD; PAMAS PARTICLE COUNTERS INDIA PVT LTD

FEELER GAUGES, TAPERED TYPE, 250mm LONG, RANGE: 0.05mm TO 1mm, 30 LEAVES WITH CALIBRATION CERTIFICATE AND WARRANTY CERTIFICATE.

HOT PLATE– STAINLESS STEEL 304 GRADE, (TO BE SUPPLIED WITH NABL CALIBRATION CERTIFICATE) . SIZE: 18” ( 1 pieces ) Brand Type Unbranded, WATER BATH– STAINLESS STEEL 304 (TO BE SUPPLIED WITH NABL CALIBRATION CERTIFICATE) NO. OF HOLES: 06, ( 1 pieces ) Brand Type Unbranded

Repair and Overhauling Service - Portable X - Ray Machine; CALIBRATION OF OPTICAL POWER METER QTY-01; No; Service Provider Premises, Repair and Overhauling Service - Multimedia Projector (MMP); CALIBRATION FOR HANDHELD OTDR, SMOTDR MODULE 1210/1550NM, 36/34 DB QTY-01; No; Service Provider Premises

Screwing die set 1 inch - 2 inch consisting of 04 pc/set (11 TPI) Make: Inder/ IMC/ Ne (or) Rigid to suit Inder 140B pipe threading machine. Firm's offer : Same as above. Make/brand : INDER

TOOL FOR PHASING AND CALIBRATION FOR FIP OF TANK T72 T90, RACK SETTING DEVICE DFOR FIP OF TANK T72 T90, CUTTING WHEEL 4 INCH, BUFFING WHEEL, WELDING ROD BOQ Title BOQ BID

CALIBRATION/ REPAIR MAINT TO HT SWITCH GEAR, HT OH LINES BATTERY BANK AND HT UG CABLES AT GE NAMS

BIMETALLIC BAND SAW BLADE OF LOOPED CONFIGURATION CONSISTING OF SPRINGSTEEL BACKING STRIP OF HSS CUTTING TEETH. MATERIAL OF AISI M42. SIZE :6200 X 41 X 1.3MM 4-6 TPI WITH ZERO DEGREE RAKE ANGLE FOR ME

M42 Grade Bi-Metallic Band Saw blade of size 3505x27x0.9mm and 4-6 Teeth Per Inch (TPI), in Laser welded condition in loop of length 3505 mm, for cutting Railway wheel of hardness 350HBW. Accepted Mak

Repair, Maintenance and Calibration of HT 11 KV VCB held with AGE BR AF Dalhousie under GE Air Force Pathanot

Custom Bid for Services - AMC and Repairing of approximate 60 moisture meters held with DO Faridkot Similar Category Calibration Services

Calibration Services - As per Scope of Work; As per Scope of Work; As per Scope of Work; Buyer premises (onsite)

Short Tender for Annual Maintenance contract for repair/calibration of moisture meters with printing facility in the state of Punjab.

HEXAGONAL HEAD BOLT- 3/8"-16 TPI (UNC) x 1-1/2" LONG. THREAD LENGTH 1" (FORGED & ROLL THREADED) TO DLW PT. NO. 15031135 TPE-13-0044 (SL.N0. 22} ALT.NO.' u ' MATERIAL SPECN: IS: 1367 (PT.III) CLASS 8.

HEXAGONAL HEAD BOLT- 3/8"-16 TPI (UNC) x 1-1/2" LONG. THREAD LENGTH 1" (FORGED & ROLL THREADED) TO DLW PT. NO. 15031135 TPE-13-0044 (SL.N0. 22} ALT.NO.' u ' MATERIAL SPECN: (1) IS: 1367 (PT.III) CLASS

Repair and Overhauling Service - CALIBRATION AND REPAIR OF SAFE LOAD INDICATOR OF DASS JONES CRANE; DASS JONES CRANE; Yes; Buyer Premises

BLADE,BAND SAW, BI-METALLIC OF AISI M42 TO SIZE 4100 X 34 X 1.1 MM THICK 2/3 TPI WITH TOOTH MATERIAL 8% COBALT & 10% MOLYBDENUM,TOOTH HARDNESS 68-69 HRC & BACK MATERIAL HIGH TENSILE TEMPERED STEEL WIT

INSIDE MICROMETER. MITUTOYO PART NO 133-146, RANGE - 125 TO 150 MM. MAKE - MITUTOYO. NABL CALIBRATION CERTIFICATE IS REQUIRED ALONG WITH SUPPLY

Customized AMC/CMC for Pre-owned Products - Calibration of Moisture meters and printers; Indosaw and Duvcon; Annual Maintenance Contract (AMC); Quarterly; Yes

INSIDE MICROMETER. MITUTOYO PART NO 133-146, RANGE - 125 TO 150 MM. MAKE - MITUTOYO. NABL CALIBRATION CERTIFICATE IS REQUIRED ALONG WITH SUPPLY.

INSIDE MICROMETER. MITUTOYO PART NO 133-146, RANGE - 125 TO 150 MM. MAKE - MITUTOYO. NABL CALIBRATION CERTIFICATE IS REQUIRED ALONG WITH SUPPLY

HEX.HD.BOLT 1"- 8 TPI(UNC) x 4 1/2"long to DLW drg no.2P11629 Alt.R3 with elastic stop nut (nyloc) for B.G.Buffers.MATERIAL SPECN:-BS:1768 GR.'V',THREAD FIT TO BS:1580 (for bolt) AISI-1010 or AISI-101

Hex.Head BOLT 1/2"-13 TPI(UNC) x2" long,THREAD LENGTH 1-1/4" TO DLW DRG NO.TPE-13- 0044{SL.NO.40} ALT NO.'u' AND TO PART.NO. 15032176. Material specification : 1. IS:1367 (PT.III) class 8.8 (or) BS 17

Pipe Threading Chaser H.S.S (14 Tpi) Bspt One Set Consist Following: (A) 1/2" To 3/4" Die Set (4 Pieces) (B) 1" To 2" Die Set (4 Pieces) Make: Inder (Or) Imc (Or) Ne (Or) Rigid, To Suit Electric

High speed steel power hacksaw blade to size 300 x 12.5 x 0.63mm x 1.8 pitch (14 tpi). All hard type A as per IS 2594/2003. Material desgination XT 87 W6 Mo5 Cr 4V2, generally conforming to RDSO specn

Custom Bid for Services - Sensor calibration twopoint alarm level setting of following Toxic Gas Detectors installed in Fab Tools and its support equipment