Loading
Loading…
Loading…
1,479 results • Best match
REFILLABLE GAS CYLINDERS (Q3), CALIBRATION GAS MIXTURES IN REFILLABLE 47L CYLINDERS (Q3), TWO STAGE PRESSURE REGULATOR (Q3)
Chlorine CL2 gas detectors Sensor and Transmitter with local display 0 to 5 ppm, HF Gas detectors Sensor and Transmitter with local display 0 to 5 ppm, Spare Chlorine CL2 gas detectors Sensor, Spare HF gas detectors Sensor, Associated RACK or ... Channel, Calibration Kit ... Detectors Calibration Gas ... with Calibration Adaptor
Unit-04 Structure 300 MT alignment, Bolting Welding, NDT, groutingc Hand over for Duct erection works of already pre-assembled and erected structure at FGD Project 3x200 MW 3X500 MW NTPC Ramagundam
Testing and calibration of meters and supply and replacement of multi-function meters at HWPM during MTA-24
TGGENCO-YTPS (5X800 MW)-BOP-II-Testing, Calibration, Servicing of Pneumatic and Hydraulic actuators, MOVs and other C and I instrumentation in CPU Regeneration and Clarifier water pump house of Yadadri Thermal Power Station of Stage-I, Veerlapalem for the period of 01.04.2026 to 31.03.2027 or from the date of commencement of work to 31.03.2027 for F.Y.2026-27.
IR Thermal imaging camera-1 including 70 m GigE cable, 20m Coaxpress cable, heavy duty tripod, AC ada, IR Thermal imaging camera- II including 70 m GigE cable, 20m Coaxpress cable, heavy duty tripod, AC a, Calibrated Lenses, Extender Ring set, Micro ... Lenses, Calibration Upto ... celsius, Calibration Upto ... band calibration
Cutting,Erection and Welding of 1198 Tubes 2396 Butt Joints and 1198 Fillet Joints of Planten SH, Finish RH Coils, Finish SH Coils including making scaffolding arrangements, Heat Treatment and NDT of Weld Joints
Design and Development of Mass Properties Measuring Fixture, Design and Development of Calibration Tool for Mass Properties Measuring Fixture
Servicing, Testing and Re-calibration of pressure Safety and Relief Valves (PS/R Vs) during MTA-2022 in HWPM
Repair of VNA, Model: MS4644B, Serial No: 1904925, Anritsu Calibration of USB Power Sensor, Model: MA24340A, Serial No: 1905014
TGGENCO KTPP CHP MM Calibration of 05nos 100MT weighbridges at KTPP Chelpur for the period from 01.04.2026 to 31.03.2027.
Electronic Flow Meter (Q3), Installation & Commissioning of Electronic Flow Meter (Q3), Calibration of Flow Meter (Q3), Visit Charges (Q3)
Annual Maintenance to E.I work to Engineer -In -Chief office(RandB), National High ways ,Quality control building SE Head quarters circle and soil testing for the period from 01.04.2026 to 31.03.2027 in the Premises of O/o the Engineer- in-Chief(RandB) Errummanzil for the Year 2026-27 ( 12 Months).
Thermal Imager handheld (Infrared Thermal Imaging system) for Stationary Installation as per RDSO spec No.TI/SPC/OHE/TIPS/1031 DEC 2013 or latest along with Accessories: 8GB TF card, card reader, Video and USB cable, 2X rechargeable batteries, power ... traceable calibration
Maintenance of existing facilities for connecting Online Effluent Quality Monitoring systems (OEQMS), Ambient Air Quality Monitoring System (AAQMS), Continuous Emission Monitoring System (CEMS) from 2x600MW STPP server to the website of CPCB & TSPCB ... remote calibration facility ...
SET OF MPT KIT CONSISTING OF :- (I) PRE MIXED BLACK MAGNETIC PARTICLE AS PER RDSO/M&C/NDT/109 REV-1 TYPE-1-2007 WET METHOD IN OIL MEDIA (DISPENSER OPERATING AEROSOL CONTAINER) of 500 ml Can with Net Content-400 ml/280 gm. (II)WHITE CONTRAST PAINT AS PER BS-5044-1973 ( DISPENSER OPERATIING AEROSOL CONTAINER) of 500 ml Can with Net Content-400 ml/280 gm. USED WITH VISIBLE MAGNETIC PARTICLE FOR WET METHOD INSPECTION and ONE KIT (SET) CONSISTS OF 1 (BLACK) & 2 (WHITE) CONTAINERS
Brazing of AC Evaporator Assy, Overhauling of Injector Assy, Calibration of Injector Assy, Brazing of AC Condenser Assy, Repair of AC
End to End Turnkey Solutions for Design, Manufacture, Supply, Integration, installation, calibration, maintenance and redeployment of Moored Buoy based Coastal Observatories
Custom Bid for Services - COMBINED AMC FOR PROCESSING AND TESTING EQUIPMENTS, Custom Bid for Services - CALIBRATION OF PROCESSING AND TESTING EQUIPMENTS
Supply of digital water meter with telemetry, Integration of digital water meter, Integration of data with TGWA, Calibration of flow meter
Annual Maintenance Contract for Servicing and Calibration of Ms. LAND make Opacity Analyzers Pertaining to KTPP OM I for F.Y.2026-27
1 Tender is called for the job for supply , installation and commissioning of auto retractable swing ladder of CS-AL based . Tender is called for the job for supply , installation and commissioning of auto retractable swing ladder of CS-AL based .
Set of Taper plug gauge as per RDSO Drg. No. SKEL-5032 Alt -0 and Ring Gauge As per RDSO Drg No. SKEL 5043 Alt -0. (Ref- 1 and 2) with suitable GO-NOGO gauge (15 +,-3mm). Material supplied with calibration certificate from NABL/Govt. approved lab house and packed in suitable wooden box. To be procured from past proven sources in Indian Railways.
TGGENCO BTPS STAGE II C and I Division Testing, servicing, replacement of defective parts if any and calibration of Gravimetric Feeders Smart Positioners Smart Transmitters Solenoid operated equipment, Limit switches RTDs Thermocouples Changing of Seal kits for HAG CAG Feeder Outlet gate Burner Tilt cylinders and etc in Boiler and its auxiliaries for UNIT III and UNIT IV of Stage II for the year 2025-26
TGGENCO-YTPS(5X800MW)-CI-II-Testing, Calibration, Servicing of Pneumatic and Hydraulics actuators, MOVs and other CI Instrumentation in TG, TG Auxiliaries, UPS and Batteries, Condensate Polishing Unit in the service Vessel Area and Compressed Air System of Unit-2 of Yadadri Thermal Power Station, Veerlapalem for the period of 01.04.2025 or from the actual date of commencement of work to 31.03.2026 for the FY 2025-26
TGGENCO-YTPS(5X800MW)-CI-I Division-Testing, Calibration, Servicing of Pneumatic and Hydraulic actuators, MOVs and other CI instrumentation in TG, TG Auxuliaries, UPS and Batteries, Condensate Polishing Unit in the Service Vessel Area and Air Conditioning System of Unit-1/Stage-I of Yadadri Thermal Power Station, Veerlapalem for the period of 01.08.2025 or from the actual date of commencement of work to 31.03.2026
Modification work of Finish SH coil support as per BHEL approved Procedure including Alignment, Welding, NDT PWHT etc. in Unit-2 Boiler at 2X800 MW NTPC Ramagundam Project AT NTPC LTD, RAMAGUNDAM, TELANGANA STPP, PHASE-I (2X800MW), DISTRICT- KARIMN
Servicing, Testing and Re-Calibration of pressure Safety and Relief Valves (PS or R Vs) during MTA-2024 in Heavy Water Plant Manuguru
Acetone as per IS 170 (Q2) MSE Exemption for Years Of Experience Yes | Complete Startup Exemption for Years Of Experience Yes | Complete Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time ... Empanelled Inspection Agency /Authority ...
Mobile Storage Compactors (Q3) ( PAC Only ) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for ... Empanelled Inspection Agency /Authority ...
Tender is invited for the subject job . Bids are likely to be rejected if valid documents are not found approved
CERIUM, DYSPROSIUM, ERBIUM, EUROPIUM, GADOLINIUM, HOLMIUM, LANTHANUM, LUTETIUM, NEODYMIUM, PRASEODYMIUM, SAMARIUM, TERBIUM, THULIUM, YTTERBIUM, YTTRIUM, IRON, MANGANESE, TITANIUM, NIOBIUM, TANTALUM, TUNGSTEN, ZIRCONIUM, ANION CALIBRATION
Annual Maintenance and Calibration of Creep Testing Machines-25 Nos (STS 1 to STS 25), M/s STAR TESTING SYSTEMS Make for 2 Years
Electrode Solutions and Calibration Standards, Indicators and Color Development Reagents, Analytical Salts and General Laboratory Chemicals, Acids Alkali Solvent, Microbiological Media and Special Chemical
Growler tester for 3-phase induction motor, 230V, 50 Hz) dual magnetization yoke with standard accessories (1) Thermacol Moulded Carry Case: 1 no. (2) ASTM Test Block: 1 no. (3) Pie gauge: 01 no. (4) PufferBulb for powder spray: 1 no. (5) Dry ... and calibration certificate ...
Removing, cleaning/purging, testing, servicing, calibration and refixing of SADC power cylinders, Flame scanners, gravimetric feeders, smart positioners, transmitters, solenoid valves, limit switches, O2 analysers, ASLD, HEEI rod and assembly, replacement of seals for Pneumatic cylinders pertaining to HAG, CAG, HAD, CAD, IDF, PAF, FDF Dampers, Burner Tilt and MOVs, replacement of defective parts if any in Unit-2 as and when required during the year 2024-25
Growler tester for 3-phase induction motor, 230V, 50 Hz) dual magnetization yoke with standard accessories (1) Thermacol Moulded Carry Case: 1 no. (2) ASTM Test Block: 1 no. (3) Pie gauge: 01 no. (4) PufferBulb for powder spray: 1 no. (5) Dry ... and calibration certificate ...
ACCELERATOR LECOCEL 2 -20+ 40 5L PART NO: 763-266, TUBE COMBUSTION, PART NO: 772-905, LANCE FILTER 773-311, CATALYST PLATINUM SILICA 15G, PART NO: 501-587, LECO REFERENCE MATERIAL CALIBRATION SAMPLE PART NO: 502-893 STEEL PIN LIGX100 PER BOTTLE, LECO ... MATERIAL CALIBRATION SAMPLE ...
ACCELERATOR LECOCEL 2 -20+ 40 5L PART NO: 763-266, ANHYDRONE A. C. S (MAGNESIUM PERCHLORATE) PART NO: 501-171, 10-16 MESH, LECOSORB, PART NO: 502-174 (SODIUM HYDROXIDE) (CAS 1318.00) 20-30 MESH, TUBE COMBUSTION, PART NO: 772-905, LANCE FILTER ... MATERIAL CALIBRATION SAMPLE ... MATERIAL CALIBRATION SAMPLE ... MATERIAL CALIBRATION SAMPLE ...
H. S. S POWER HACKSAW BLADE AS PER I. S. 2594-77 SIZE: 600 MM LENGTH X 50MM WIDTH X 2.5MM THICKNESS X 4, H. S. S POWER SAW BLADE AS PER I. S. 2594-77 SIZE: 600 MM LENGTH 40MM WIDTH 2.5MM THICKNESS 6 TPI MAKE
Process technology document or Quality assurance plan for melting of gamma Titanium Aluminide ingots as per DMRL specification Annexute-I, Gamma Titanium Aluminide, DMR GA 5 alloy of 250 mm diameter as per DMRL specification Annexute-I, Gamma Titanium Aluminide, DMR GA 6 alloy ingots of 150 mm diameter as per DMRL specification Annexute-I, Gamma Titanium Aluminide, DMR GA 6 alloy ingot of 250 mm diameter as per DMRL specification Annexute-I, Gamma Titanium Aluminide, DMR GA 12 alloy ingots of 150 mm diameter as per DMRL specification Annexute-I
Custom Bid for Services - REPAIR OF PSG VECTOR SIGNAL GENERATOR MODEL NO E8267D, Custom Bid for Services - CALIBRATION OF PSG VECTOR SIGNAL GENERATOR MODEL NO E8267D
Cable laying supply and fixing of TB canopies in XU-I area for process feed pumps and calibration of hydrogen gas detectors and meters during MTA24
Custom Bid for Services - AMC of IX Blue Make 2Axis Rate Table with Sl No 17 for a period of 2 Year as per Annexure 1QTY8 Quarter, Custom Bid for Services - AMC of IX Blue Make 2Axis Rate Table with Sl No 18 for a period of 2 Years as per Annexure 1 ... - Calibration of ... 1 Calibration to ... - Calibration of ... 1 Calibration to ...
Repair of N5244A/MY52441988 10 MHz to 43.5 GHz PNA-X Network Analyzer, Calibration of N5244A/MY52441988 10 MHz to 43.5 GHz PNA-X Network Analyzer ( 1 Job)
Custom Bid for Services - REPAIR CHARGES FOR CSW5550 400 160 704 LF RMS, Custom Bid for Services - FACTORY CALIBRATION CHARGES FOR PN CSW5550 400 160 704 LF RMS
To provide Man Power services for 8 Nos. of Personnel in the categories of Computer Operator, Data Entry Operators, Work Inspectors, Technical Assistants/ Electricians, Office Subordinate and Other Categories working in A) O/o Executive Engineer ... (Projects-II),( Quality Control -II), ...
Bearing Shock Pulse condition analyzer of rotating machines with complete accessories as per specification enclosed, for measuring bearing shock pulse function-19-99 dBpv having 4x16, Backlight display. Make/Model: "MCM Instruments Model No. BVT111 ... with calibration certificate ...
Repair of Door lock Assy Frt RH, Overhauling of Injector Assy, Calibration of Injector Assy, Metal Filling Surfacing of Brake Disc, Repair of Steering Booster, Repair of Power Steering Pump
Customized AMC/CMC for Pre-owned Products - AMC of Acutronic make 2-Axis Rate table Model: AC246-144, Sl No 20715 including Calibration of the system parameters as per Technical specifications and terms & conditions for a period of two years; As per ... including Calibration of ... including Calibration of ...