Inspection, Testing & Audit Tenders in West Bengal

Calibration of laboratory instrument/equipment related to NABL Recognition of Samuktala Sub District Laboratory and Birpara Sub District Laboratory as per ISO/IEC 17025- 2017 and procurement of Chemicals/Reagents/Water sample testing equipment/Kits

Template to check control arm silent block seat of FIAT Bogie(LHB); Ref:Drg No.J&T/JUDW/16-621.Material cold work tool steel to IS:3748/90, Hardness 50/55 HRC.Supply with calibration certificate issue

Ring gauge for Pinion of WAG-9/WAP-7 locos. reference RDSO Drawing no:- SKEL-5043 Alt.0 along with calibration certificate. Note:- Supply of ring gauge with the following items (1) Pulling Extractor f

Calibration of breath analyser device. Make-Preksha Enterprise. Model-Platinum l-15 Device serial no. A801468, A801469, A801470, A801471, A801472, A801473, A801474, A801475 ,A801476, A801477, A801478, A801479 And Make- Tayaltech, Model-Alpha, Sl. No. CRIS4212

Dial Snap Gauge 125-150mm, Series No :-201-106, Dial no-2109 S-10,Range 0-1mm with L.C.O.001mm as a set with Calibration Certificate traceable to NABL.Make:-MITUTOYA/TESA/MAHAR.Warranty/guarantee of 1

Trammeling gauge set for axle guide alignment of ICF Bogie as per attached Annexure-01. along with calibration certificate from NABL/Govt. approved test house and shall carry a warranty of up to 30 mo

RING GAUGE FOR PINION AND SHAFT FOR CHECKING 20 TEETH PINION OF WAG-9 LOCOMOTIVES AS PER RDSO DRAWING NO. SKEL-5032. MATERIAL SHALL BE AS PER RDSO DRAWING. CALIBRATION CERTIFICATE FROM GOVT APPROVED T

RING GAUGE FOR PINION SHAFT OF WAG-9 LOCO. AS PER RDSO DRG NO SKEL 5043 ALT '0' SUPPLY WITH CALIBRATION CERTIFICATE ISSUED FROM NABL APPROVED TEST LAB HOUSE & PACKED IN A SUITABLE WOODEN BOX .

Wheel profile measuring gauge for EMU/MEMU as per RDSO Drg No.91146 gauge measuring following items 1) Wheel flatness 2) flange wear 3)Root wear 4) Sharp flange 5)Tread wear Note: Calibration certific

Set of CBC Gauges for Freight Stock as per Attached Annexure A (One set Consists 07 Different Types of CBC Gauges) with Calibration certificate issued from NABL/Gov. approved test Lab valid for One Ye

Antinuclear antibody(ANA) [Rate to be quoted per PACK basis] 1. Total ANA Screening Kit by Elisa Method. 2. Pack Size :96tests 3. Cal-Qualitative. 4. Cut-off : >1.2 Index value. 5. Calibration-CDC

Pressure Guage (100 MM) for Feed Pipe along with adapter, with Calibration Certificate, Confirming to RDSO Specification 02-ABR-02, as per RDSO Drawing No. WD-83062-S-05 FIRM OFFER MAKE BRAND-HKCO IS

6 INCH BRAKE CYLINDER SINGLE AIR PRESSURE GAUGE SELF ILLUMINATED WITH OPERATING 110V DC LED WITH A LEAST COUNT 0.1KG/CM2 WITH CALIBRATION AND DIAL MARKINGS FOR BRAKE CYLINDER PRESSURE AT 1.6 KG/CM2 SU

Template to check control arm silent block seat of FIAT Bogie(LHB); Ref:Drg No.J&T/JUDW/16-621.Material cold work tool steel to IS:3748/90, Hardness 50/55 HRC.Supply with calibration certificate issue

PEDESTAL CROWN ROOF GAUGE FOR CASNUB 22NL, 22NLB, 22HS BOGIES AS PER FIG. NO.28 OF RDSO G-95 MANUAL. WARRANTY: MINIMUM OF 01 YEAR. MAKE/BRAND: PIE OR GANAPATHY INDUSTRIES OR SIMILAR. CALIBRATION CERTI

Custom Bid for Services - Annual Service Contract for Maintenance Servicing and Calibration of 01 One no of Particle Counter Instrument Make PAMAS Model S 40 Serial No 4002573 at DVC RTPS for one year period

Custom Bid for Services - Annual Maintenance Contract for Maintenance Servicing and Calibration of Thermo Gravimetric Analyzer TGA Model 701 Make Ms LECO Corporation USA on OES basis for DSTPS Andal DVC for 02 two years

Custom Bid for Services - Deployment of service engineer for the work of checking commissioning & calibration of 02 nos of opacity monitors of PP III NSPCL Durgapur Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Deputation of service engineer for dismantling verification health checking calibration and refitting of Bently Nevada make TSI VMS of Main Turbine Similar Category Operation And Maintenance Of Other Machines And Plants

Custom Bid for Services - Calibration and Testing of Hydrogen Dew Point Measurement Probe Make: GE Installed in MTPS Unit 5-6 and Unit 7-8 DVC Similar Category Operation and Maintenance Power House/Power Plant

Support service for watching, guarding and help in day to day work in Galsi Quality Control Office under Edilpur (I) Sub-division from Aug 2024 to March 2025

Maintanance and Repairing work at Quality Control Lab, Inspection Bungalow, Garage attached to Bungalow, Field Hostels within the campus of River Research Institute, Haringhata Central Laboratory , Mohanpur, Nadia.

Installation of Cautionary / Regulatory / Informatory Signs and Road Safety Furniture at various Roads under Quality Control Sub-Division under Murshidabad Highway Division No.II during the year 2019-20

BI-METALIC BAND SAW BLADE. M-42, SIZE: (4100X34X1.07) MM. 3-4 TPI. SUITABLE ITL- 260 DCA/TCSA-TCA (250

BI-METALIC BAND SAW BLADE, M-42, SIZE: (4100X34X1.07) MM. 3-4 TPI SUITABLE ITL -260 DCA/TCSA-TCA (250

ENDLESS BIMETAL BAND SAW BLADE, SIZE- 8000MM LENGTH X 67 MM WIDTH X 1.6 MM THICK, TPI= 2/3, (Q3) ()

Preparation of Road safety estimate as per Road safety audit observation from 0.0 kmp to 19.2 km of Cooch Behar Baneswar Alipurduar road (SH-16) under Cooch Behar Highway Division. including preparation of PPT of DPR.

Supply of Spare Parts and Incidental Services includes Inspection, Health check-up, Calibration of Slow Speed Balancing Machine (SSBM) by OEM M/S Schenck Rotec India Ltd. (SRIL) at any of the ongoing PSER SAS site.

WBSO ENGG Fabrication, Installation, Calibration and Commissioning of 2 x 200 KL Semi Buried Tanks for ATF Facility and allied Civil Electrical and Mechanical Works towards re structuring of IOCL Bagdogra Aviation Fuelling Station Bagdogra Airport

REPAIR AND SERVICING OF DISTRIBUTION TRANSFORMER, DEHYDRATION TO TRANSFORMER OIL, REPLACEMENT OF INDOOR/OUTDOOR COLD SHRINK JOINTS INCLUDING REPAIR SERVICING, CALIBRATION OF CT/PT AND RELAYS TO THE VCBs AND CONNECTED ALLIED WORKS AT JAFFARPORE, BARAS

MOEI & Fans, RMO Electrical & Mechanical Services at C.I.S.F. Campus at E.M. Bypass, Kasba, Kolkata during 2022-23. (SH 11 kv H.T. breaker servicing thorough overhauling, cleaning, checking, calibration of relay, HT breaker Spout, C.T. replacement etc.)

Template to check control arm silent block seat of FIAT Bogie(LHB); Ref: Drg No.J&T/JUDW/16-621.Material cold work tool steel to IS:3748/90, Hardness 50/55 HRC.Supply with calibration certificate issu

DIAL PRESSURE GAUGE WITH 6" DIAL FOR PRESSURE RANGE 0-14 KG/CM2, DUAL SCALE INDICATION WITH 3/8" (BSP) BOTTOM CONNECTION GLYCERINE FILLED AND WITH LEAST COUNT OF 0.1 KG/CM2 ALONG WITH CALIBRATION CERT

Set of development of TRAMMEL GUAGES for Axle box guide alignment of ICF Bogie Frame with fxture for refencing Drg. No. PD/LGD(SCRS Drg. No. J&eT. LGD.S..NO. 3657 with a Calibration Certifcate (consis

BP Pressure Gauge of 6-inch size, Range: 0-7 kg/cm2, Red mark at 5kg/cm2 for DTC Coaches of Vande Bharat Train. Make:KBI or Midlands or Equivalent. Note:-Necessary test certificate and Calibration rep

PRESSURE GAUGE OF 4 INCH DIAL FOR PRESSURE RANGE 0-16KG/CM2 WITH 1/4 INCH BSP(BOTTOM MOUN MALE THREAD) HAVING LEAST COUNT OF -0.2KG/CM2 ALONG WITH CALIBRATION CERTIFICATE TRACEBLE TO NABL ACCEPTED MAK

Template to check control arm silent block of FIAT Bogie(LHB); Ref:Drg. No.J&T/JUDW/16-621. Material cold work tool steel to IS:3748/90, Hardness 50/55 HRC supply with calibration certificate issued f

ANTI ROTATION LUG GUAGE FOR CASNUB 22 W, W(M) ,NL,NLB AND 22 HS BOGIES REF.FIG.NO.26 OF RDSO G95 MANUAL.ALL GUAGES MUST BE CALIBRATED AND TWO YEARS SEPARATE CALIBRATION CERTIFICATES OF EACH GUAGE REQU

DEPUTATION OF EXPERT FOR CALIBRATION AND CHECKING OF PROBES SHINKAWA-MAKE INCLUDING CONTROLLERS INSTALLED FOR TSI SYSTEM OF MAIN TURBINE AND TDBFP-A AND B OF U-2, 500 MW AT DVC-DSTPS ANDAL, WEST BENGAL.

Annual Maintenance Contract Testing Adjusting and Calibration

Patch repair of Santoshpur to Popra Road from Ch. 0.00 Kmp to 2.00 Kmp in stretches under Quality Control Sub-Division under Murshidabad Highway Division No.II during 2022-23

SUPPLY, COMMISSIONING AND PWCAMC OF 01 No. AUTOMATIC VISCOMETER AS PER ASTM D-7042 FOR QUALITY CONTROL LABORATORY AT LBP KOLKATA, P-68, KARL MARX SARANI, PAHARPUR, KOLKATA-43

As per tender documents

8871082134, 8864032124, 8864034954, 8871080764, 8170161121, 8170493024, 8878109082, 8878103214, 8864033834, 8864032144, 8864032104, 9114350614, 8864030384, 8808740604, 8808730104, 8808730114, 8864030364, 8864034404, 8808730014, 8864036274, 8864036214, 8864034384, 8864033894, 8864030294, 8426095434, 8864036264, 8884300714, 8864031634, 8864039414, 8864037044, 8420410203, 8424427284, 8424427304, 8864031174, 8864031194, 8864035954, 8864034644, 8864034284, 8422720604, 8864039634, 9153015184, 9153105124, 8822361064, 8864860204, 8864035914, 9114350284, 8864039304

BIMETALIC BAND SAW LADE. LENGTH-6900MM, WIDTH- 54MM THICKNESS -1.6MM, TPI-3/4 OR 2/3, Hardness-(68-69 Rc (Q3)

Providing Road Safety Measures as per recommendations of Road safety Audit by IIT Kharagpur and ARTO Barrackpore in different locations of Ghospara-Road and Barrackpore Barasat Road (SH-1) and Ghospara Jaguli Road under Barrackpore Division, PWD

MOEI & Fans, RMO pump sets, compound light, sub-station equipment at NTH(ER), Salt Lake, Kolkata in FY 2025-26. (Repairing & Servicing of 2x1000 KVA oil type transformer including relay servicing & calibration, Servicing of HT & LT Panel)

Template to check control arm silent block seat of FIAT Bogie (LHB), Ref: Drg No. J&T/JUDW/16-621. Material cold work tool steel to IS:3748/90, Hardness 50/55 HRC. Supply with calibration certificate

STRAIGHT EDGE 3200 mm X 80-90mm X 20-25mm, Taper Edge 15-20mm as per IS: 2220, IS: 5268 , Make & Brand: FACOM; MTC; SUPER-X;SANDVIK; T.C. & GC as per IRS condition. Master calibration certificate from

GO-NO GO GAUGE OF SIZE 150 MM LONG X 20MM WIDTH X 15MM (+/- 0.03MM) THICKNESS SUITABLE FOR USING ON RING GAUGE AS PER DRG NO. SKEL-5043. CALIBRATION CERTIFICATE TRACEABLE TO NABL TO ACCOMPANY WITH SUP