Inspection, Testing & Audit Tenders in West Bengal

flannellette rolls of cm width Average Turn Over of Last 3 Years 16 Lakh (s) Experience with Gov. Required 1 Year (s) Flannellette Rolls Of Cm Width ( 5520 ) Technical Specifications * As per GeM Category Specification Specification Specification ... of Quality Assurance , ...

Purchase and instollation of all type instrument for Material Testing Laboratory at Jagtai-I GP

CARBIDE TIPPED BAND SAW BLADE, SIZE: 8585 LENGTH X 67MMWIDTH X 1.6MM THICK TPI= 1/1.25 (Q3) ()

Blade band saw, size 8000 x 67 x 1.6 mm x 1.4/2 TPI, grade M-42

NIT

CIVIL WORK

1. Black magnetic particle ink (400 ml Can) conforming to RDSO/M&C/NDT/109/2007 (Rev 02) Oct 2020, AMS 3041, IS 6410, ASTM E 709, ASTM E 1444, IS: 3703, ISO 9934). 2. White contrast paint (400 ml Can) conforming to BS: 5044, BS: 6072, IS: 3703,ISO 9934.

Handling and transportation operation and all allied services as per tender document including Preservation and Quality Control Management (Except PEG godowns) SWC Jalpaiguri No.18

Hiring of inspection vehicle under Murshidabad Highway Division No.II, P.W. (Roads) Directorate for use of the Assistant Engineer, Quality Control Sub-Division, P.W. (Roads) Directorate

BASE STATION AMDI, TEST UNIT FLARE FIRING COMPLETE, ACTIVE RADAR HOMING EMULATOR, GROUND STATION MERLIN INDIA, BATTERY DISCHARGER, TX UNIT HIGH POWER SINGLE 80W, HOT NOSE THERMAL ENHANCEMENT, TX CONT AERIAL SYNTH T1 T6, FAST CHARGER MULTI OUTLET

As per tender documents

Tender for calibration of instruments and glass wares at Regional Agmark Laboratory, Minister of Agriculture and Farmers Welfare, Department of Agriculture, Cooperation and farmers welfare, Directorate of Marketing and inspection, Kolkata (Recall)

Testing, calibration and repairing of protection relay of HT switch gear and Transformer at surface substation of Pit No. 2 for safe electrical operation and to comply DGMS violation under Pandaveswar Colliery

Profile checking gauge (K value & P value) along with feeler gauge. As per annexure attached. along with calibration certificate issued from NABL approved lab. 01 set consists of 06 items 06 Nos.

WHEEL PROFILE GAUGE NO. SKDL 3592 ALT -6 (FOR MEASUREMENT OF FLANGE WEAR ROOT WEAR, EVEN WEAR, TYRE THICKNESS, WHEEL DIAMETER AND FLAT SPOT MEASURING GAEGE) WITH CALIBRATION CERTIFICATE. MODEL NO, TWG

Wheel Diameter Gauge with calibration certificate in a carrying wooden box for measuring wheel diameter of carriage, wagon and locos in mounted condition with digital display, Range- 800 mm to 1100 mm

Grease Test Apparatus Drop Point. with Standard Accessories - 02 Nos. Tubes, 02 Nos. beakers, SRAE Cup - 02 Nos., 02 Nos. - Calibrated Thermometer upto range -5 TO 300 degree C with Calibration Certif

SET OF CBC GAUGES FOR H-TYPE TIGHT LOCK COUPLER AS PER SPECIFICATION ATTACHED.Supply with Calibration Certificate issued by GOVT. approved test Lab and Warranty Certificate as per IRS Terms and Cond

RATCHET TYPE TORQUE WRENCH OF RANGE 140 - 560 NM,3/4-INCH SQUARE DRIVE WITH 38MM SOCKET, CALIBRATION CERTIFICATE FROM ANY NABL CERTIFIED FIRM. MAKE: TAPARIA, TRITORC, DENEERS, TORQUE MASTER OR MACMAS

Set of gauges for Schaku coupler with calibration certificate (Traceable to NABL certified lab)& tracebility certificate as per list below- 1.Profile gauge for upper & lower cup sleeve(2ED-181-1149(SC

Reverse Flow U-Tube Viscometer Size No. 06 with handle and stopper as per Spec:- BS/IP/RF AS PER IS 1448 P-25 With Calibration Certificate FIRM'S OFFER- MAKE/BRAND:- "SELF"

Pressure Gauge (100mm) for Feed Pipe with Calibration Certificate, confirming to RDSO Specification 02-ABR-02, Pressure Amendment No.04 Of September 2016, Appendix - H to RDSO Drawing No : WD-83062-S-

HAND DRIVEN GENERATOR TYPE INSULATION TESTER , ANALOG TYPE, METAL BODY, 2500V, 0-10000 MEGA OHMS TO AGRONIC MAKE OR CIE MAKE, MODEL No: 444 WITH CARRYING CSAE, TESTING LEADS, CALIBRATION CERTIFICATE A

TAPE METRIC MEASURING STEEL AUTOMATIC WINDING TYPE, 13MM X 5 MTRS. LEGIBLY GRADUATED (WHITE CLAD) IN MM METALLIC OR ABS CASE SPECIFICATION IS:1270/65. TO BE SUPPLIED ALONG WITH CALIBRATION CERTIFICAT

ALIGNMENT (DISTORTION) CHECKING GAUGE FOR CENTRE PIVOT PIN & SIDE BEARER AS PER JIG & TOOL /KPA DRG NO- 23/0476 , All gauges must be calibrated from NABL accredited lab and calibration certificate wit

TAPE METRIC MEASURING STEEL WINDING TYPE HAVING WIDTH 9.5MM X 30 MTRS. LONGLEGIBLY GRADUATED (WHITE CLAD) IN CMS METALLIC USE COVERED WITH LEATHERTO IS 1270/65. TO BE SUPPLIED ALONG WITH CALIBRATION

Gauges for Flat type Centre Pivot Top and Bottom as per Annexuer-A attached. Gauges to be supplied with Material Test Certificate & Calibration Certificate from NABL or NABL accredited or Govt. approv

DIGITAL CAPACITANCE METER 3 1/2 DIGIT LIQUID CRYSTAL DISPLAY (LCD) RANGE 0-2000MFD, 0-2000PF WITH CALIBRATION CERFICATE FROM NABL APPROVED LAB OR RACEABLE TO NABL CERTFIED EQUIPMENT WITH NABL TRACEABL

Parallelism Checking tool no. 12.841.0502 for Control arm of LHB coaches. Firm should submit TC & GC along with material and the item should be supplied with third party calibration certificate from N

Set of gauges for Schaku coupler with calibration certificate (Traceable to NABL certified lab)& tracebility certificate as per list below- 1.Profile gauge for upper & lower cup sleeve(2ED-181-1149(SC

Set of trammeling gauge for trammeling inspection of CASNUB 22 NL , NLB ,HS bogie with calibration certificate from NABL approved lab. One set trammeling gauge is consisting of 1) Trammeling gauge wit

Feeler gauge long leaf (Thickness gauge) Range 0.05 mm to 1 mm 28 Leaves. Make: MITUTOYO (Model No. 184 - 303S) or equivalent make. Calibration certificate from NABL / ILAC approved agency or approved

Precision grade heavy duty digimatic dial gauge with least count 0.001 mm of range 12.7mm with all accessories and magnetic base stand which are collant proof with dust protection with calibration cer

Wheel Profile Gauge No SKDL-3592 Alt-6 or latest. (For Measurment of flange wear Root Wear. Even Wear, Tyre Thickness, Wheel Diameter and Flat spot Measuring gauge) with calibration certificate. Mode

ROTATING VANE TYPE ANEMOMETER ALONG WITH RANGE 0.4 TO 30 M/SEC. ALONG WITH CALIBRATION CERTIFICATE WITH TRACEABILITY. DETAIL SPECIFICATION IS : 1) DISPLAY - 12 MM TO 20 MM LCD (LIQUID CRYSTAL DISPLAY

GAUGES FOR MEASUREMENT OF A DIMENSION OF SLACK ADJUSTER FOR AIR BRAKE FITTED WITH BG WAGONS, MATERIAL STAINLESS STEEL AISI-304. DRG No-WD-XI-1136. SUPPLY WITH CALIBRATION certificate and Protective

TAPE METRIC MEASURING STEEL AUTOMATIC WINDING TYPE, 13MM X 5 MTRS.LEGIBLY GRADUATED (WHITE CLAD) IN MM METALLIC OR ABS CASE SPECIFICATION IS:1270/65 TO BE SUPPLIED ALONG WITH CALIBRATION CERTIFICATE F

Set of trammeling gauge for trammeling inspection of CASNUB 22 NL , NLB ,HS bogie with calibration certificate from NABL approved lab. One set trammeling gauge is consisting of 1) Trammeling gauge wit

Supply, installation and commissioning of AC-DC MCB Test Bench for testing of single pole and double.pole MCB with following features: i) Time - Current calibration test ii) Non-tripping at full Load

Supply of Digital Multimeter with NABL Calibration Certificate Voltage Range 0-1000V Ac/0-1000V DC AC Voltage accuracy - 1%, DC voltage- 0.5%, Resistance Range 0-400 ohms, Resistance accuracy -0.5% A

Traffic Calming Measure for Road Safety on 18 nos Rural Road under different blocks within WBSRDA Hooghly Division Hooghly District as per Road Safety Audit Norms under Road Safety AAP 2024-25

Calibration Gas Methane Span Cans

Band saw blade, Size 8000 x 67 x 1.6 mm x 1.4/2 TPI, Material Grade M-42

CEREMONIAL GARLAND 3033, CEREMONIAL GARLAND 3034, CEREMONIAL GARLAND 3035, CEREMONIAL GARLAND 3036, TPI inspection certificate and Warranty certificate

Band saw blade, size: 8000 x 67 x 1.6 mm x 1.4/2 TPI, Material grade M-42.

Handling and transportation operation and all allied services as per tender document including Preservation and Quality Control Management (Except PEG godowns) SWC NJP Godown No. 02

Testing, calibration and repairing of HT switch gear and Transformer at surface sub-station of Pit No. B for safe electrical operation and as per DGMS norms violation under Pandaveswar Colliery, Pandaveswar Area

Repair and Calibration of 05 Nos Bosch/Mico make Fuel Injection Pumps (FIPs) and 30 Nos of Bosch/Mico make Nozzle holder assemblies suitable for BS6D170 Engines applicable to BEML make BD155 BullDozer.

KNUCKLE LOCKING FACE GAUGE (GAUGE NO. 5 OF G-80 MANUAL) MADE OF HARDENED STAINLESS STEEL WITH ENGRAVING OF DRAWING NO DESCRIPTION OF GAUGE, WITH CALIBRATION CERTIFICATE OF NABL APPROVED LAB MAKE: PIE

Replacement of Fuel cell sensor with calibration of Preksha make 04 Nos of Breath Analyzer machines as per Annexure-A. Procurement from OEM or OEM authorized dealers only are instructed to upload v