Inspection, Testing & Audit Tenders in West Bengal

Carrying out Road Safety Audit of existing roads of State Highways of SH4, SH4A, SH8, SH9 and SH14 in Package 3 in the State of West Bengal (4th Call)

Carrying out Road Safety Audit of existing 62 nos PMGSY Road Total Length 454.167 Km within 12 nos Blocks under Barasat Division in the District of North 24 Parganas

PROFILE CHECKING GAUGE (P-VALUE) WITH FEELER GAUGES FOR BULL GEAR 72 TEETH MATING PINION 20 TEETH LOCOS WAP-7. REF. DRAWING NO. SKDP 3474 & RDSO MP.MI-129/86. MATERIAL: TOOL STEEL IS: 3748/90, HARDNESS:50/55 AND FEELER GAUGE SIZE 0.20mm, 0.25mm, ... with calibration certificate. ... Note: Calibration certificate ...

Tooth spacing K-value checking Go Gauge for bull gear 72 teeth mating shaft pinion 20 teeth for WAP-7 locos to RDSO Drg. No. SKDP-3474 & RDSO: MP.M1-129/86. Sizes GO: 260.958mm/260.992 mm. Material: Tool Steel to IS: 3748/90, Hardness: 50/55 HRC. To ... with calibration certificate. ... Note: Calibration certificate ...

Supply and installation of Various types of Instruments for Specialized Seed Health Testing Unit to Strengthening of Seed Quality Control Laboratory under SMSP

Renovation of Coding Room at the ground floor of Regional Quality Control Laboratory / Food and Supplies Department, Siliguri, under North Bengal Construction Division

Repair, maintenance, reconditioning, calibration, testing and overhauling including replacement of required spares of One No. (01) of PG-PL Governor of Woodward make installed in Mainline Engines at ERPL, Asansol.

Custom Bid for Services - Maintenance Calibration of Gas Detectors Sound Level Meter and Lux Meter without Spare Parts or Safety Dept GRSE Main Unit as per SOTR Ref No Safety2101

Custom Bid for Services - Annual Maintenance Contract Calibration of Universal Testing Machine MSF Regd No 7011 Make Instron Model No 8801 8803 without spare parts AMC for two 02 years

Stamping and Calibration and also repairing, maintenance etc. for all 6 (six) nos Weigh Bridges located at different 6 (six) nos Krishak Bazars under Uttar Dinajpur Zilla Regulated Market Committee

OVERHAULING, REPAIRING, CALIBRATION AND TESTING OF M/S. WOODWARD MAKE PG-PL GOVERNORS (2 NOS.) OF RECYCLE GAS COMPRESSORS 22-K-01 A/B AT FOB AREA OF HALDIA REFINERY.

Supply and Installation of A Set of Standard Rockwell & Brinell Hardness Test Block, Indenters with Holder and Diamond Indenter along with NABL Calibration Certificate as per Annexure Firms Offer M

Digital outside micrometer with measuring range 150-300 mm, resolution 0.001mm, similar to make Mitutoyo product code no: 340-252-30 or equivalent with calibration certificate traceable to NABL. Accep

TYRE DEFECT GAUGE for BG , as per plate 38 rule2.8.4 of IRCA, made of 3mm thick hard alloy steel plate. make-PIE or similar. with OEM,s original calibration certificate.

5 KV Diagnostic insulation tester with 3x3 test leads for earth, guard & line connection 1.5 Meters AC mains chord, Main protected fuse, Calibration certificate, Three programmable timers, modes for c

SNAP GAUGE (GO & NO GO) FOR SILENT BLOCK (DIA 145) FOR FIAT BOGIE TO ICF DRG. NO. J&T/G-1032/01 SUPPLY WITH CALIBRATION CERTIFICATE. Accepted make/brand: PRASAD

KIT OF 17 GAUGES AS PER ANNEXURE OF RF-361 DRAFT GEAR AS PER ANNEXURE X-1 ALONG WITH CALIBRATION CERTIFICATE FROM GOVT/NABL APPROVED TEST HOUSE. Accepted Make: PRASAD

Machine condition advisor(vibration analyzer) to model no. CMAS 100-SL of M/s.SKF make or its equivalent. For specification see attached document. note: 1).Calibration certificate and operating manual

Set of Air Spring height measuring gauges (Go & No Go) Ref drg.No. SK-ASG-1/2019, material tool steel IS 3748/90, hardness - 50/55 HRC. & supply with calibration certificate.

Dial indicator , L.C: 0.01 mm, Range: 0.01mm to 10mm, Make: Mitutoyo or Tesa or Weller or Insize or Yuzuki Note: Material shall be supplied along with Calibration Certificate. MAKE - YUZUKI

Supply of Hydraulic DYNAMOMETER 10 TON CAPACITY with steel carrying box,150mm dia dial with manufacture test certificate and Calibration certificate to be submitted by supplier along with supply" Acce

SUPPLY, INSTALLATION, COMMISSIONING AND TESTING OF FERROUS DEBRIS MONITOR IN A CARRY CASE WITH CALIBRATION AT SITE AND CHECK STANDARDS ,POWER ADAPTERS 232 CONNECTOR WITH ACCESSORIES AS PER TECHNICAL S

Precision grade heavy duty digital Tubular Inside Micrometer (rod type) with carbide measuring face, Range 200 MM-2000 MM , Least count 0.001 MM. with all accessories. Calibration certificate from N

Custom Bid for Services - Calibration for medical instruments of Blood Centre at Burnpur Hospital SAIL IISCO Steel Plant for 24 months Similar Category Customized AMC/CMC for Pre-owned Products

CIVIL WORKS

Comprehensive Structural Health Assessment Stability Evaluation and Structural Safety Audit of All Existing Buildings and other Civil Structures within the Campus of Diamond Harbour Subsidiary Correctional Home South 24 Parganas

Marshal test and ingredients test for quality control of Hot mix produced from DM-45 and DM-50 Plant at Asphaltum Department, Palmer Bazar.

Handling and transportation operation and all allied services as per tender document including Preservation and Quality Control Management (Except PEG godowns)SWC, Jalpaiguri 10

TESTING CALIBRATION OF RELAYS

Hand held LCR meters. The technical specifications as per enclosed Annexure. Note: 1) Valid calibration certificate from NABL/Govt. approved test LAB to be supplied along with the material. 2) Manual

TAPE METRIC MEASURING STEEL WINDING TYPE HAVING WIDTH 9.5MM X 30 MTRS. LONGLEGIBLY GRADUATED (WHITE CLAD) IN CMS METALLIC USE COVERED WITH LEATHERTO IS 1270/65. CALIBRATION CERTIFICATE TO BE SUBMIT

TAPE METRIC MEASURING STEEL AUTOMATIC WINDING TYPE, 13MM X 5 MTRS.LEGIBLY GRADUATED (WHITE CLAD) IN MM METALLIC OR ABS CASE SPECIFICATION IS:1270/65, . CALIBRATION CERTIFICATE TO BE SUBMITTED ALONG W

Trammeling gauge set for axle guide alignment of ICF Bogie as per attached Annexure-01. along with calibration certificate from NABL/Govt. approved test house. Firm accepted MAKE/BRAND PRASAD/PARAGON/

Supply of Digital Vernier Caliper to size 0 to 1500 mm. Similar to Precision Instruments Mumbai/model No: PG-DVC1500 with Least count of 0.01mm. Warranty: 12 Months, Necessary Calibration Certificate

Digital inclinometer, digital level and protractor with a magnetic bottom similar to Loram Part No. 166044 with V- groove, resolution 0.1 degree and accuracy of 0.2 degree. The device calibration can

Master setting gauge for dial snap gauge. Size (O.D) 130.000mm (+/- 0.002). Thickness-40mm. Material: Cold work tool steel to IS:3748/90, hardness-50/55 HRC. Supply with calibration certificate issued

Digital Inclinometer, digital level and protractor with a magnetic bottom similar to Loram Part No. 166044with V-groove, resolution 0.1 degree and accuracy of 0.2 degree. The device calibration can ea

SUPPLY OF PRESSURE GAUGE IN TONS FOR MOUNTING AND DISMOUNTING OF CTRB PULLER MACHINE 100-70T, SUITABLE FOR SUMANGLAM OR SILOMAN MAKE. MAKE: BAKER, MITUTOYO OR SIMILAR ALONG WITH CALIBRATION CERTIFICA

WHEEL DISTANCE MEASURING GAUGE SIZE-1590-1610MM,L.C.-0.1 MM,ACCURACY-+0.1/-0.1 MM,0 SET AT1600MM,WITH CALIBRATION CERTIFICATE,MAKE-AOGE,PIE,JYOTI ENTERPRISES OR SIMILAR Firm's offer - Make AOGE,

10 Inches Master Pressure Test Gauge for Gauge Calibration. Range : 0-16 kg/Cm2, Least count: 0.05 cm2 Accuracy: +/- 0.25% FSD, Connection: 3/8 inch BSP (M) bottom. Make/Brand: Midlands

Hydraulic DYNAMOMETER 10 TON CAPACITY with steel carrying box, 150 mm dia dial with manufacture test and calibration certificate to be submitted Make: VENUS, YOTA or similar Accepted Brand / Make : H

Precision grade heavy duty digimatic dial gauge with least count .001mm og range 12.7mm with all accessories and magnetic base stand which are collant proof with dust protection with calibration certi

Set of gauges for Schaku coupler with calibration certificate (Traceable to NABL certified lab) & traceability certificate as per list below- 1) Profile gauge for upper & lower cup sleeve (2ED-181-114

Digital Bore Gauge of measuring range : 150-250 mm with Digital ABS Dial Gauge Indicator, least count : 0.001 mm, Accuracy : 0.003 mm with calibration certificate from NABL accredited lab with suitabl

TAPE METRIC MEASURING STEEL AUTOMATIC WINDING TYPE, 13MM X 5 MTRS.LEGIBLY GRADUATED (WHITE CLAD) IN MM METALLIC OR ABS CASE SPECIFICATIONIS:1270/65 TO BE SUPPLIED ALONG WITH CALIBRATION CERTIFICATE FO

Digital force gauge, Range: 0-20 kg LCD display with NABL Calibration Certificate ,Make: LUTRON, Model-FG 20 KG or Make:EXTECH Model-475044 or Make: SAUTER, Model-FH20 . With warranty certificate

Custom Bid for Services - Biennial Contract for Maintenance Servicing and Calibration of HACH make water lab instruments of Chemical laboratory RTPS DVC Similar Category Annual Maintenance Contract Service - Laser Speed Meter

Set of items for EPD and HOD connection, [Set of items for EPD and HOD connection, consisting of three items as detailed below: (1) Screw Socket head cap No. 10-24 %u03A4%u03A1%u0399 x 1-1/2 inch and EMD Pt.No.147115 and DLW Pt.No.19150064, Qty/set: ... 10-24 TPI x ... inch-18 TPI x ...

Traffic Calming Measure for Road Safety on 15 nos. Rural Road under different blocks within Murshidabad Division, Murshidabad District as per Road Safety Audit Norms (under Road Safety AAP 2024-25)

Carrying out Road Safety Audit of existing roads of State Highways of SH1A, SH3, SH3A, SH7, SH11A, SH13 and SH15 in Package 2 in the State of West Bengal, 3rd Call