Inspection, Testing & Audit Tenders in West Bengal

REPAIRIING OVERHAULING AND CALIBRATION OF 6 KV SWITCHGEAR AT WATGUNGE PUMPING STATION

Consultancy services for NDT test at Basirhat Administrative Building in the district of North 24 Parganas under Barasat Division (PWD) during the year 2023-24

Engagement of Security Guards and sweeper at Departmental godown, Quality Control Lab, Data Centre and gates of Sech Abasan at FF Block Salt lake City, Kolkata-700106 under Metropolitan Drainage Division No-I, during the year 2022-23.

Office of the Joint Director of Agriculture Plant Protection and Quality control at 230 A N.S.C. Bose Road Tollygunge Kolkata 700040_ Repairing work to 4 nos. rooms,corridor in 2nd. Floor staircase godown and construction of Underground reservoir

Day to day maintenance of E.I work at Kaliyaganj State General Hospital campus and Quality Control Sub-Division PWDte at Kaliyaganj under Raiganj Electrical Section-II of Dakshin Dinajpur Electrical Division, PWD in the district of Uttar Dinajpur.

Engagement of Security Guards and Sweeper at Departmental godown, Quality Control Lab, Data Centre and gates of Sech Abasan at FF Block , Salt Lake City, Kolkata- 700106 under Metropolitan Drainage Division No-I during the year 2023-2024.

COMP MAINT REP REPLACEMENT AND MAINT OF 33 KV SWITCH YARD MRS AND POWER TRANSFORMERS WITH PERIODICAL SERVICES CALIBRATION OF 11 KV HT SWITCH GEARS OF VCB HT CABLES RMUS AND ALLIED WORKS AT 33 / 11 KV HT NETWORK AND MRS AND LIFT MECH LAUNDRY EOT CRANE

Digital Torque wrench Tester (200-2000) NM Socket size -27mm as per specification attached. Note - 1. Calibration Test and Warranty Certificate must be supply with material by Digital Torque Tester. 2. Digital Torque Tester must be Commissioning and testing in Diesel Loco shed jhansi by firm Engineers.

Allied works for Mechanical Repair of Bullet no 1 and NDT inspection of 2 nos 150 MT Above Ground Bullets at LPG Bottling Plant, Budge Budge

SUPPLY, INSTALLATION AND CALIBRATION OF BATTERIES WITH BUYBACK OF SAME NUMBER OF BATTERIES

Repair Rehabilitation of existing Hanskhali Bridge with slope protection of abutment situated over River Churni at Ch 15.50 Km on the Hanskhali-Bagula-Duttaphulia Road of Quality Control Sub-Division No I under Nadia Highway Division No II PWRoadsDte

Replacement of old and damaged aluminium wires by copper wires at different quarters of FF Block Sech Abasan, SITC of 1.5Tr Split type room air conditioning machines at quality control laboratory at FF Block Sech Abasan, Salt Lake, Kolkata.

Preparatory measures for various roads in SectionI ahead of the upcoming monsoon including brick stitching jhama metal consolidation and allied works under Quality Control Sub Division NO I of Nadia Highway Division No II for the year 2026 2027

Rain cut damage restoration work at Gola Ghati Bridge at 6th kmp 6.5km to 7.1 km and 8.7km to 9.5 km in stretches of VendabariMahapukur Road attached to the Kaliyaganj Quality Control Sub Division under Uttar Dinajpur Highway Division

Engagement of security guards and sweeper at departmental godown, Quality Control Lab, Data Centre and gates of Sech Abasan at FF Block, Salt Lake City, Kolkata - 700106 under Metropolitan Drainage Division No. - I for the financial year 2024-25

Support service for watching and guarding at Palla(I) Bungalow , Edilpur Rest Shed and watching, guarding including help in day to day work in Galsi Quality Control Office under Edilpur (I) Sub- Division from Aug 2023 to March 2024

Preparatory measures for various roads in SectionIII ahead of the upcoming monsoon including brick stitching jhama metal consolidation and allied works under Quality Control Sub Division No I of Nadia Highway Division No II for the year 2026 2027

Set of Pressure guage for Flowwell make oil pump. Model 1575, 0-7 bar or 0-100 lb/inch square. (1 Set consist of 2 guages). Make- WIKA (or) VISION (or) MICRO (ALL MODEL AND MAKE FOLLOW EN 837-1). NOTE: CALIBRATION CERTIFICATE TO BE PROVIDED WITH EACH GAUGE.

RMO sub station and electrical installation in CNH Building at Shibpur, Howrah (SH: Dehydration of Transformer 3 Nos. 800 KVA and 4 Nos. 6 KV HT OCB i/c overhauling & Servicing of HT OCB and LT ACB and 2 Nos. Capacitor Bank Panel and Calibration of IDMT Relay.)

Krishnanagar Hanskhali Road from Ch 9 Km to Ch 10 Km Patch Repairing work under Quality Control Sdub Division No I of Nadia Highway Division No II PW Roads Directorate in the District of Nadia during the year 26-27

DuttapuliaAranghata Road from Ch 41Km to Ch 41.90Km Restoration work due to laying of underground water supply pipe line along right hand side RHS by Nadia Arsenic Divin I PHED under Quality Control SubDivision NoI of Nadia Highway Division NoII PWRD

Supply of Skilled labour to help the process of remaining sand quality testing work i.e grain size analysis of sand /shingles etc. collected from different river beds in connection with new sand mining policy -2021 at cooch behar Quality control Labo

Preparatory measures for various roads in Section II ahead of the upcoming monsoon including brick stitching jhama metal consolidation and allied works under Quality Control Sub Division No I of Nadia Highway Division No II for the year 2026-2027

Repairing and maintenance work with Paver Block due to excessive rainfall on Duttapulia Aranghata Raod from Ch 44.05 Km to Ch 44.20 Km under Quality Control Sub-Division No I of Nadia Highway Division No II during the year 2026-27

Krishnanagar Hanskhali Road from Ch 9 Km to Ch 10 Km Patch Repairing work under Quality Control Sdub Division No I of Nadia Highway Division No II PW Roads Directorate in the District of Nadia during the year 26-27

C. I. Test Weight, 20 Kg, Hexagonal for calibration of weighing scale and bridges

" CALLIPER, ELECTRONIC, DIGITAL RANGE: 0-300MM, SERIES: 500 WITH CALIBRATION CERTIFICATE FROM MANUFACTURE (Q3)

Safe Load Indicator, Calibration of Safe Load Indicator in a year for 03 years

Cloth Polyester and Viscose Dope Dyed- Uniform Cloth Average Turn Over of Last 3 Years 3000 Lakh (s) Experience with Gov. Required 3 Year (s) Cloth Polyester And Viscose Dope Dyed- Uniform Cloth ( 1765029 ) Technical Specifications Specification ... of Quality Assurance , ...

Temporary Staging arrangements and some allied works for conducting NDT of KHILA Existing OHR of KHILA Pipe W/S scheme at Udaynarayanpur Block under Howrah Division, P.H.E. Dte.

CALIBRATION GAS MIXTURE IN 0.5 LTR W/CALUMINIUM CANISTER ALONG WITH FINECONTROL NEEDLE VALVE CONTAINING:METHANE: 1000 PPM, ETHANE: 1000 PPM,ETHYLENE: 1000 PPM, HYDROGEN: 1000 PPM,ACETYLENE: 1000 PPM, CARBON DIOXIDE: 5000PPM, CARBON MONOXIDE: 5000 PPM,NITROGEN: BALANCE. SPECIFICATION: FILLINGPRESSURE: 20KG/CM2, PREPARATIONTOLERANCE: +/- 20%, CERTIFICATE ACCURACY:+/- 2%, STABILITY: 12 MONTHS.

Digital vibration meter, detail technic [Digital vibration meter, detail technical specification attached at Annexure. 1.Tender specific data sheet along with brand of the offer product should be provide at the time of bidding. 2.Product is to be ... with calibration certificate ...

Portable Pressure Dew Point Meter with Standard Accessories for Measuring in CCB Panel of Electric Locomotives as per Specification Attached as Annexure. Make: HNL or ENDEE or MICHEL or FLUKE or equivalent. Note: Calibration certificate from OEM or NABL/Govt. approved test LAB to be supplied along with the material.

Portable Pressure Dew Point Meter with Standard Accessories for Measuring in CCB Panel of Electric Locomotives as per Specification Attached as Annexure. Make: HNL or ENDEE or MICHEL or FLUKE or equivalent. Note: Calibration certificate from OEM or NABL/Govt. approved test LAB to be supplied along with the material.

Portable Pressure Dew Point Meter with Standard Accessories for Measuring in CCB Panel of Electric Locomotives as per Specification Attached as Annexure. Make: HNL or ENDEE or MICHEL or FLUKE or equivalent. Note: Calibration certificate from OEM or NABL/Govt. approved test LAB to be supplied along with the material.

Set of Hex head bolts consisting of two items as per details given below for the maintenance of HHP Diesel Locomotives:- (1) Hex head bolt 7/16 inch - 14 TPI x 2- 1/2 inch long to EMD Part No. 454934 & DLW Part No. 19013036 - Qty. 01 No. (2) Bolt Hex head 7/16 inch - 14TPI x 1-7/8 inch as per EMD Drg. No.9418045- Qty. 01 No (Sl.No. 1 + 2 = 01 Set) Make: TVS/ UNBRAKO/ DFL/ POOJA/ LPS or SIMILAR.

AMC of 3 nos. of MFM including Annual Calibration at Durgapur Terminal for two years

Dye-Penetrant test Conforming to RDSO Specen.No.M&C/NDT/105/2001With latest Revision,compriseing of the following items: 1.Penetrant Visibility Method- A,C&D,Sensitivity Level-3,in Aerosol can of 500 ml capacity(Type-II). 2.Non- Halogenated (Class-2)solvent removers/Cleaner in Aerosol can of 500 ml capacity. 3.Non Aqueous developers (i.e from -d),in Aerosol can of 500 ml capacity.Penetrant,Developer and Cleaner per kit in the ratio of 1: 2: 3.

Kit for Magnetic Particle Inspection consisting of following items: 1) 03 no's of White contrast paint in aerosol cans confirming to ISO 9934- 2:2002 (can volume of 525 ml and net content 400 ml). 2) 02 nos of Black Magnetic Particle Ink in aerosol ... M&C/ NDT /109 ...

Kit for Magnetic Particle Inspection consisting of following items: 1) 03 no's of White contrast paint in aerosol cans confirming to ISO 9934- 2:2002 (can volume of 525 ml and net content 400 ml). 2) 02 nos of Black Magnetic Particle Ink in aerosol ... M&C/ NDT /109 ...

Dye-Penetrant test Conforming to RDSO Specen.No.M&C/NDT/105/2001With latest Revision,compriseing of the following items: 1.Penetrant Visibility Method- A,C&D,Sensitivity Level-3,in Aerosol can of 500 ml capacity(Type-II). 2.Non- Halogenated (Class-2)solvent removers/Cleaner in Aerosol can of 500 ml capacity. 3.Non Aqueous developers (i.e from -d),in Aerosol can of 500 ml capacity.Penetrant,Developer and Cleaner per kit in the ratio of 1: 2: 3.

Set of Digital dial gauge with magnetic base includes following items:- 1) Digital dial gauge similar to model DGI/2 (high accuracy) specification Range:-0-12.70mm ,accuracy:- 0.005mm,Resolution:-0.001 mm. with NABL certified calibration certificate. Make:- Mitutoyo , Baker, Groz , Precise, Krost or similar 2)Magnetic base Model similar to Mitutoyo 7010s-10

Supply & testing of 2500V Megger Insulation Tester, suitable for measuring insulation resistance range 0-10000M ohms, Metal Body, Hand Driven Generator Type with protection cover as per IS:2992 1987. Make: MOTWANE/CIE/FLUKE OR SIMILAR. Note:- Valid ... Valid calibration certificate ...

Set of Digital dial gauge with magnetic base includes following items:- 1) Digital dial gauge similar to model DGI/2 (high accuracy) specification Range:-0-12.70mm ,accuracy:- 0.005mm,Resolution:-0.001 mm. with NABL certified calibration certificate. Make:- Mitutoyo , Baker, Groz , Precise, Krost or similar 2)Magnetic base Model similar to Mitutoyo 7010s-10

Hand held LCR meters. The technical specifications as per enclosed Annexure. Note: 1) Valid calibration certificate from NABL/Govt. approved test LAB to be supplied along with the material. 2) Manual book with detail operational instructions to be supplied along with the material. 3) All accessories to be supplied as per attached Annexure.

Hand held LCR meters. The technical specifications as per enclosed Annexure. Note: 1) Valid calibration certificate from NABL/Govt. approved test LAB to be supplied along with the material. 2) Manual book with detail operational instructions to be supplied along with the material. 3) All accessories to be supplied as per attached Annexure.

Hand held LCR meters. The technical specifications as per enclosed Annexure. Note: 1) Valid calibration certificate from NABL/Govt. approved test LAB to be supplied along with the material. 2) Manual book with detail operational instructions to be supplied along with the material. 3) All accessories to be supplied as per attached Annexure.

Supply & testing of 2500V Megger Insulation Tester, suitable for measuring insulation resistance range 0-10000M ohms, Metal Body, Hand Driven Generator Type with protection cover as per IS:2992 1987. Make: MOTWANE/CIE/FLUKE OR SIMILAR. Note:- Valid ... Valid calibration certificate ...

One time Calibration and Servicing of 40 nos. Laboratory Equipments installed at Central Laboratory, Unnayan Bhawan.

Ranaghat Aranghata New Road from Ch 2 Km to Ch 2.80 Km and Ch 3.30 Km to Ch 4 Km emergent patch repairing and maintenance work under Quality Control Sub Division No.I of Nadia Highway Division No.II PW Roads Dte, in the District of Nadia