Valves Tenders in Gujarat

PRV Assly for 1600 HHP DP

CKD PRV With Gauge , Input & Output

Control Valve Pneumatic (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

REPAIR/RENEWAL/REPLACEMENT OF RUSTED COLUMN PIPES, DISTRIBUTION PIPES, REPLACEMENT OF SLUICE VALVE, REPAIR TO VALVE PIT INCLUDING CLEANING OF OVER HEAD TANK, PUMPS, MOTORS AND STARTERS AND OTHER CONNECTED WORKS AT MILITARY STATION JAMNAGAR

ajanta Sluice Valve of nominal size 80 mm Brand: ajanta (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687793777348 dt.04/05/2026)

Unbranded Sluice Valve of nominal size 150 mm Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687778337671 dt.19/04/2025)

Aluminium Door Seal For Suitable Length for Door, 1200mm x 400mm Mirror, Check Valve 80mm Lift type with Disk, CPVC Ball Valve 25mm, UPVC Ball Valve 25mm, CPVC Solvent 118 ml, UPVC Solvent 118 ml

Unbranded 40 millimeter Check Valve " Swing Type " Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687758915279 dt.14/11/2023)

POH kit for Check valve ESCORT MAKE PT. No. (1) valve sealing ring 954 = 01 Nos. (2) sealing ring 957 = 01 Nos as per RDSO Drg. No. SK-98112 Alt-Nil Item No. 4,7.

ZOLOTO 1/2 inch Nominal Size Carbon Steel Screwed end, General, ZOLOTO 1/2 inch Nominal Size Carbon Steel Screwed end, General purpose ball valve

Unbranded 80 mm Nominal Size Stainless Steel Grade 316 Flanged, Unbranded 80 mm Nominal Size Stainless Steel Grade 316 Flanged end, General purpose ball valve

VZO 1/2 inch Nominal Size Cast Iron Screwed end, General, VZO 1/2 inch Nominal Size Cast Iron Screwed end, General purpose ball valve

Unbranded 100 mm Nominal Size Stainless Steel Grade 316 Flanged, Unbranded 100 mm Nominal Size Stainless Steel Grade 316 Flanged end, General purpose ball valve

Unbranded 1/4 inch Nominal Size Cast Iron Screwed end, General, Unbranded 1/4 inch Nominal Size Cast Iron Screwed end, General purpose ball valve

1 Spare rubber parts, seal diaphragm, seal kits for Instrumentation limited control valve actuator models VSC VA5R., 2 Spare rubber parts diaphragm for Ms Instrumentation limited actuator models VSC VA1D, 3 Spare rubber parts diaphragm, for Ms Instrumentation limited actuator models VDC VA2D, 4 Spare rubber parts diaphragm, seal kits for Ms Instrumentation limited actuator models VST VA3R, 5 Spare rubber parts diaphragm, for Ms Instrumentation limited actuator models VSC VA3D

CKD make PRV with gauge and bracket

Procurement of Valve repair kit for repair of Hoerbiger make valves

Unbranded 1 1/2 inch Nominal Size Carbon Steel Screwed end,, Unbranded 1 1/2 inch Nominal Size Carbon Steel Screwed end, General purpose ball valve

SOLENOID VALVE, SPEED CONTROL VALVE, KIT PAD ASSY FRONT, PARKING BREAK CABLE, TIE ROD END COMPLETE

getway Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 25 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Split Wedge Type Brand: getway (Detailed Description/Specifica

Unbranded 1/2 inch Nominal Size Stainless Steel Grade 316 Screwed, Unbranded 1/2 inch Nominal Size Stainless Steel Grade 316 Screwed end, General purpose ball valve

Item10-8355310834, Item20-8355912194, Item30- 8304131774, Item40-8340120244, Item50-8304132284, Item60-8330493028, Item70-8335051004, Item80- 8355310018

REPLACEMENT KIT FOR (FESTO MAKE PRV TO BACHOFEN).

SS BALL VALVE 40 MM WITH TEFLON SEATING, MATERIAL SPECIFICATION:- 1-VALVE BODY : SS 304 , 2-BALL: SS 304 ,3-SPINDLE AND NUT: SS 202 OR HIGHER GRADE , 4-SEATING : TEFLON ,5-OPERATING HANDLE: SS202 OR

RO MEMBRANE MEMBRANE 40 X 40 01 NOBAG FILTER JUMBO 20 INCH 01 NOTO 20'' FILTER SET 02 SETELECTRICAL SV WATER CONTROL VALVE 02 NOS

Flow Control Valve Size: 1/8X6 Make: JANATICS Part.No. GRS-5105006/Equivalent Model in FESTO Make /Equivalent Model in SMC Make Firm offered make: JANATICS

Supply of HP Valves spares , Safety Valve Spares , Valve Assemblies andERV Spares for St-1 Boiler at NTPC Mouda

Overhauling kit for check valve with choke to RDSO SK-98112 Alt Nil consisting of the following items: (1) Filter-item No.2 (1/ kit). (2) Valve sealing Ring-item No.4 (1/kit). (3)Compression spring-it

Ball Valve/ Drain valve 90 square mm, 1 1/4 suitable for 3-phase loco Main transformer as per ABB ID No. HSTN 422368. Note: One sample should be got approved before effecting bulk supply. FIRM'S OFFER

Isolation Cock (Ball Valve) to BLW Part No. 17390060 & Drawing No.10634218 for HHP Feed Valve Inlet Size 1-1/4 inch operating Pressure 10 kg/square cm to be used in WDG4, WDP4 loco with vent. Make-Legris, CLP, Smith Valve, EMD etc.

Prabhat Angle Valve 15 mm (1/2") Angle Valves (As per Table 6 of IS, Prabhat Angle Valve 15 mm (1/2") Angle Valves (As per Table 6 of IS 9763)

Unbranded Angle Valve 15 mm (1/2") Angle Valves (As per Table 6 of IS, Unbranded Angle Valve 15 mm (1/2") Angle Valves (As per Table 6 of IS 9763)

Bellow sealed Valve for High Temperature application and supply of solenoid valves, stem adapters

3 Inch stainless steel (SS) non-return valves (NRV) with flanged ends and spare SS flage (with 2 nos asbestos gasket). Accepted make/brand - ASTEN.

getway 2 1/2 inch Nominal Size Stainless Steel Grade 316 Screwed, getway 2 1/2 inch Nominal Size Stainless Steel Grade 316 Screwed end, General purpose ball valve

REPAIR MAINTENANCE OF SECTION DISCHARGE LINES CONTROL VALVES AND OTHER CONNECTED WORKS AT KANYA PUMP HOUSE ALAKHANANDA NARMADA KAVERI WNC O MESS AND ROBERT ROAD HOUSE AREA UNDER GE NW NAVY NAGAR COLABA MUMBAI

Water Locking Unit (Water Check Valve assembly with pneumatic operated) . Technical Specification i)Shape of assembly -Y type (Normally open),AISI - 304 (SS) ii)Inlet Port (Water) - 1/2 ''(Female Thre

getway 1 inch Nominal Size Stainless Steel Grade 316 Screwed end, General purpose ball valve Brand: getway (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-5116877468188

getway 2 inch Nominal Size Stainless Steel Grade 316 Screwed end, General purpose ball valve Brand: getway (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-5116877067803

Soft Spare Kit i. e. Repair Kit for line mounted O2 PRV, Soft Spare Kit i. e. Repair Kit for line mounted N2 PRV, Soft Spare Kit i. e. Repair Kit for line mounted H2 PRV, Soft Spare Kit i. e. Repair Kit for line mounted CO2 PRV

REPAIR MANT OF SUCTION DISCHARGE LINES CONTROL VALVES AND OTHER CONNECTED WORKS AT KANYA PUMP HOUSE ALAKHANANDA NARMADA KAVERI WNC O MESS AND ROBERT ROAD PUMP HOUSE AREA UNDER GE NW NAVY NAGAR COLABA MUMBAI

REPAIR/ MAINTENANCE OF SUCTION DISCHARGE LINES, CONTROL VALVES AND OTHER CONNECTED WORKS AT KANYA PUMP HOUSE ALAKHANANDA, NARMADA, KAVERI, WNC (O) MESS AND ROBERT ROAD PUMP HOUSE AREA UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI

2/2 WAY PNEUMATIC CYLINDER OPERATED INVESTMENT CASTING ANGLE TYPE ON/OFF CONTROL VALVE BOTH END SCREWED TYPE END BSP TO SIZE 1/2" ALONG WITH 3/2 WAY DIRECT ACTING SOLENOID VALVE 110V AC ACTUATOR SPECI

1 No. 24 IN 600 Series WW UG MOV

HORIZONTAL CHECK VALVE for 15 mm Bore with parallel thread screwed in ends may be as per IS:778-1984 (Reaffirmed-2020) CL-1,Tab-9 with screwed in Bonnet integral seats.

SUPPLY OF BALL VALVE-1/2 INCHES (15mm), TO RCF DRG. NO. LW63106, ALT.NO. NIL or latest , ITEM NO.3 AS PER DRG.NO. RCF DRG.NO.LW63106. Material and specification as per drawing.

getway 1/2 inch Nominal Size Stainless Steel Grade 316 Screwed end, General purpose ball valve Brand: getway (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-51168772603

Unbranded 1/2 inch Nominal Size Stainless Steel Grade 316 Screwed end, General purpose ball valve Brand: NA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687714045

Cair 2 inch Nominal Size Stainless Steel Grade 316 Screwed end, General purpose ball valve Brand: Cair (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687743617872 d

A set of standard gas mixture for calibration of DGA. 10 ltr capacity Aluminum can with nozzle and screw fine control valve on to outlet valve on top of the can to obtain required gas flow with regula