Valves Tenders in Gujarat

Custom Bid for Services - JG24ITT034 Annual Rate Contract for Servicing of Control Valves and Shutdown valves in all unit of Gujarat Refinery

Seal kit for F/T ball valve assembly for fuel transfer system (Q3)

Double check valve for KBIL make Tri plate panel to KBIL Part no. ll40531.

Purchase of Bidirectional Knife Gate Valve with Actuator Assembly forAHP at NTPC Solapur.

Gate, Globe, Check, Butterfly Valve

SUPPLY & INSTALLATION OF 8" GEAR OPERATED CAST IRON BALL VALVE, SUPPLY OF WHEEL CHOKES, SUPPLY OF HDPE BARRICADE

Purchase of NRV/CHECK VALVES for firefighting system at NTPCSolapur(18MEG-01C).

Supply of Repair kit for BARKSDALE MAKE IMPORTED rotary direction control valve (MVD) (Q3), Supply of Major repair kit for BARKSDALE MAKE IMPORTED rotary direction control valve (MVD) (Q3), Seal kit set for BARKSDALE Make rotary direction control valve ... direction control valve (MVD) ...

JC22ITT309- Servicing, Repair and Maintenance of Control Valves and Shutdown Valves During Upcoming Shutdown of GRSPF, GRE and NB Units at Gujarat Refinery.

DUPLOMATIC MAKE DIRECTION CONTROL VALVE MODEL NO. E5P4-S12/30 OR SIMILAR

S S BALL VALVE 40 MM WITH TEFLON SEATING , SPECIFICATION AS PER ANNEXURE ATTACHED

SCREWED ENDS CARBON STEEL BALL VALVE SIZE 1 INCH. GEM PRODUCT ID : 5116877-48506890087.

50 mm Stainless Steel Ball Valve(Specification as per attached Annexure-A) Make: SEALMECH

1 inch Nominal size Stainless Steel Grade 316 Screwed end, general purpose ball valve.

JC22ITT140 Servicing, Repair and Maintenance of control valves and shutdown valves during shutdown of GR1 and GR2 area in the year 2022 and 2023.

SUPPLY OF 18" TMBV FLANGED MOTORISED BALL VALVE, 600# AS PER SCOPE OF JOB AND STC, SUPERVISION AND COMMISSIONING AS PER SCOPE OF JOB AND STC

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed, Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 15 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Split Wedge Type

Supply of Reinforced EPDM rubber Diaphragm for 100D actuator of VAL CONTROL S. A. make Control valves (Q3)

JC17ITT076 Servicing and Maintenance of Critical Control Valves of South Block and Other connected Units of Gujarat Refinery.

COMBOVALVE SANAND, COMBOVALVE HAZIRA, COMBOVALVE RAJKOT, COMBOVALVE DUMAD, PRV SANAND, PRV HAZIRA, PRV RAJKOT, PRV DUMAD, QCC SANAND, QCC HAZIRA, QCC RAJKOT, QCC DUMAD

General Purpose Ball Valves (Version 2) (Q4), Ball valve 3/8" (Q3)

Procurement of Self Actuating Pressure Control Valve for Heater treater -ONGC Ahmedabad (Q3)

IP Control Valve Oil Filter ( 6 the number pi ), OIL FILTER-SIMOLAX- SEAL OIL SYSTEM ( 2 the number pi )

Actuator seal kit, 1 set consist of Actuator diaphragm, oil seal, gasket and seat packing for Control valve Model no. D 100-100-F, 2B 1500 Lb, Tag no. 3525-CV-21, Make - Gadelius_ IMI CCI, Actuator spring for Control valve Model no. D 100-100 - F, 2B ... for Control valve Model ... for Control valve Model ... for Control valve Model ... for Control valve , ... for Control valve , ... for Control valve , ...

Supply of API6D 6 inch 150 series MOV Gate Valve at WRPL Navagam

JC21ITT240 SERVICING, REPAIR AND MAINTENANCE OF CONTROL VALVES AND SHUTDOWN VALVES DURING UPCOMING SHUTDOWN OF GRE BLOCK (CDU, VDU AND VBU) AND HGU-I UNITS.

Operation And Maintenance Of Other Machines And Plants - AMC for Control Valve And Electropneumatic Actuated On Off Valve

Supply of Excess Flow Check Valve for MTM supply V-78 as per attached Technical specifications

Supply of 01 API6D 12 inch 150 series F/F Swing Check Valve at WRPL, Navagam.

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3)

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3)

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3)

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3)

PRIMA Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, PRIMA Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

PRIMA Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends, PRIMA Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 50 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

Nirmal Industrial Controls Pvt. Ltd. Make Spare Direction Control Valve with actuator Assembly, (Q3)

Rubber Kit for HS-4 Control Air Valve webco Cat. No. 593002.

ELECTRICALLY OPERATED ANGLE TYPE CONTROL VALVE TO SIZE 25MM WITH ELECTRICAL COIL TO THE FOLLOWING SPECIFICATION: (A) 2/2 WAY ON-OFF CONTROL VALVE, (B) MODEL : SRT, (C) TYPE : NORMALLY OPEN, (D) WOR

ELECTRICALLY OPERATED ANGLE TYPE CONTROL VALVE TO SIZE 25MM WITH ELECTRICAL COIL TO THE FOLLOWING SPECIFICATION: A) 2/2 WAY ON-OFF CONTROL VALVE. B) MODEL : SRT. C) TYPE : NORMALLY OPEN. D) WORKING :

ELECTRICALLY OPERATED ANGLE TYPE CONTROL VALVE TO SIZE 40MM WITH ELECTRICAL COIL TO THE FOLLOWING SPECIFICATION: A) 2/2 WAY ON-OFF CONTROL VALVE. B) MODEL : SRT. C) TYPE : NORMALLY OPEN. D) WORKING :

Ball valve brass body size 20 mm., IS:9890 (1981) (Material used in ICF & LHB coaches.)

VALVETECH INDUSTRIES Leaded Tin Bronze to IS 318, LTB 2 Body Seat, VALVETECH INDUSTRIES Leaded Tin Bronze to IS 318, LTB 2 Body Seat Ring for Non Return Valve, Size 50 millimeter

NON RETURN VALVE 3/4 INCH DESIGNED FOR PRESSURISED FLUSHING SYSTEM AS PER MMDTS 19027. Rev.01. ITEM CODE SPAC 0010906 OR EQUIVALENT MAKE FUNCTIONALLY COMPATIBLE IN PRESSURISED FLUSHING SYSTEM OF IND

NON RETURN VALVE 3/4 INCH DESIGNED FOR PRESSURISED FLUSHING SYSTEM SPAC. SPAC PART NO. SPAC 0010906 or SIMILAR. SIMILAR MEANS SIMILAR IN FUNCTION IN PRESSURISED FLUSHING SYSTEM MAKE BRAND: AIR INDIA

POP Up Sprinkler, Control Valve, Brass Valve, Air Valve, Material

ELECTRICALLY OPERATED ANGLE TYPE CONTROL VALVE TO SIZE 40MM WITH ELECTRICAL COIL TO THE FOLLOWING SPECIFICATION: A) 2/2 WAY ON-OFF CONTROL VALVE B) MODEL : SRT C) TYPE : NORMALLY OPEN D) WORKING : INT

REPAIR / MAINTENANCE OF MOTOR CONTROL PANEL, CONTROL VALVES, MOTORS, PUMP SET AND CONNECTED ITEMS UNDER GE (AF) JAMNAGAR NO.2

Submersible pump- set 3 star rating with ISI Marked Single Phase with Motor Rating of 1.5 KW Complete with Starter panel & with Non return Valve, erection clamp, submersible 3 core flat copper cable(

Custom Bid for Services - Hiring Services for Repair and Maintenance of Control Valves/Shutdown Valves/Angle Valves/SAPCVs at Dahej Plant for Three Years Similar Category Annual Maintenance Contract for Network Security Devices

Supply of PARKER make seal kit (model no. BVA803892) set for ball valve oil hydraulic actuator (DRC-