Loading…
Loading…
9,723 results • Best match
EMERSON MAKE FISHER VALVE SPARES/ AS PER TENDER
FLOWSERVE MAKE DECOKING VALVE SPARES / AS PER TENDER
SUPPLY OF PRESSURE SAFETY VALVE AS PER TENDER
SUPPLY OF NON METALLIC VALVE AS PER TENDER
COMPLETE PRESSURE SAFETY VALVE (Q3), MANDATORY SPARES (Q3)
SHP TO HP PRDS VALVE, 6" 2500BW (Q3)
A/DRYER, 35, 12V, TWIN, PRV
PROCUREMENT OF VALVES (CAST) GATE, GLOBE AND CHECK FOR BCPL
Providing and Fixing of MS Pipe and Submersible cable for extending of lowering Delivery Pipe NRV at TWell No. M 7 and G 10 in Sector 19 Panchkula
Repair of 125 HP Centrifugal Pump and Oil immersed starter MCCB 400 amp and NRV 250mm at Water Works Sector 20 Panchkula and all other works contingent thereto
Repair and Servicing of 65 KVA Genset at TWell No. KV 7 and Supply of Cable NRV SV etc. at T Well No. KV 5 Sec 20 Panchkula
BALL A216WCB BW RB 300 8IN A G BEFL MO, VLV 2WAY A216 WCB BALL Cr13 FL 600 8IN, VLV 2WAY A216 WCB BALL Cr13 FL 300 6IN, VLV 2WAY A216 WCB BALL SS304 FL 600 6IN, BALL VLV 4IN 600 RB RF AG MANUAL OPER, VLV 2WAY A216 WCB BALL Cr13 FL 600 2IN, VLV 2WAY ... GLOBE VALVE 2 ... GLOBE VALVE 2 ... 4IN, GATE VALVE CAST ... INCH, VALVE GLOBE ...
5/2 - way Valve (Magnet Valve) for Automatic Coupler. VOITH Part No. TSK 992904110D00 OR 821C-PM-761
KIT FOR DISTRIBUTOR VALVE WITH RELAY VALVE CONSISTING OF 22 ITEMS AS PER SCOPE OF SUPPLY ( ANNEXURE 'A')
PISTON VALVE to KBIL / NYAB PART No. 188098 / 391 PISTON VALVE to KBIL / NYAB PART No. I88098/391.
Piston Valve part No- 176350 make : Knorr-Bremse. Accepted Make :- Piston Valve SIMILAR TO KBI part No- I76350
Pinch Valve Assembly, Inlet pinch valve for western lavatory EVAC system, KBIL Part no. 84980 make : knorr bremse
SAFETY VALVE, KBI Pt. No. II91919/02105. Spec:SAFETY VALVE, KBI Pt. No. II91919/02105 for Vande Bharat Express.
1-CP BRASS. Angle Valve 15 mm 2-C.P. BRASS Single Angle Valve DIA 15 mm Both side
Sale of Scrap (CS MDPE) Pipe, Valves , Misc Items at Panipat, Haryana
Rate Contract for Valves Testing/RevisioningJobs at IOCL-Panipat Naphtha Cracker, Panipat.
Procurement of Spares for Antisurge Valve as per tender documents
Rotational Moulded Polyethylene Water Storage Tanks as per IS 12701 (Q3), Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3)
Repairing and Renovation of Boundary wall, Iron grill, main gate and construction of 4 Nos. new hodies along with sluice valve and CI specials at Iqbalpur water works
AMtc of EPHS in Sector 13 Urban Estate Kurukshetra Providing and fixing of panel board sluice valve CI specials and submersible cable cable etc, complete in all respect
Cleaning of Houdies and channels, providing and fixing of 300mm i/d sluice valve and C.I/D.I. specials at water treatment plant and all other works contingent thereto
Development of road laying of water supply pipe lines SW pipe construction of sluice valve chamber manhole etc complete in all respect and all other works contingent thereto
Bainsi Estimate for improvement of water supply by laying of bye pass DI pipeline fromIBS Sudaka to village Bainsi and Construction of Sluice Valve Haudi in Distt Nuh
providing and laying of 200mm id DI pipe and sluice valve complete in all respect and all other work contingent three years defect liability mtc free of cost
Repair of collecting tank and pump chamber at Franswala Road Disposal and constructon of sluice valve houdies at Mandi Disposal Kaithal Town and all other works contingent thereto
Repair of boosting station in village Dobh and Prov and fixing of Clear water pump set at boosting station and construction of sluice valve hodie in village Dobh
Construction of S/S tank Laying of pipe line for Head works for SandS tank,Construction of sluice valve houdies for SandS Tank, Construction of open inlet Channel
Laying of 6 8 id DI Pipe line from Main Water Works Fatehabad to Hans Swami Nagar Construction of Sluice Valve Houdies and all other works contingent thereto
Wind Shield Glass, Distributor Head, Governer Shaft, Supply Pump, Camplate, Oil Seal, Pulling Electromagnet, Pressure Control Valve, Woodruf Key, Spring Compression, Pump Housing
a Magnet Valve for Power Contractor PL No.12170240, b Magnet Valve for Power Contractor PL No.12170240, c Magnet Valve for Power Contractor PL No.12170240, d Magnet Valve for Power Contractor PL No.12170240, e Magnet Valve for Power Contractor PL ... Magnet Valve for ...
FRONT HUB BEARING, KNUCKLE KIT, FIELD COIL WITH THERMAL CUT OUT, Wiper Arm Assy, Valve, Trailer Control Valve, REAR BRAKE SHOE SET, HORN SIGNAL AIR HORN ASSY, Cable Hooh Support, Pad
Provision of individual isolation valves for fresh water supply line in quarters of PRPC Township
SET OF OVERHAULING KITS FOR DIFFERENT PNEUMATIC VALVES (POSITION NO.B) OF AC RAKES OF KOLKATA METRO AS PER ANNEXURE ENCLOSED. (BRAKE VALVES) specn: AS PER ANNEXURE (As per OEM Part No.)
SET OF OVERHAULING KITS FOR DIFFERENT PNEUMATIC VALVES (POSITION NO.B) OF AC RAKES OF KOLKATA METRO AS PER ANNEXURE ENCLOSED. (BRAKE VALVES) specn: AS PER ANNEXURE (As per OEM Part No.)
Connector set with cable for Magnet Valves (One set includes wiring harness & connectors for both Application and Holding Magnet Valves) as per Knorr Bremse Part No. C172368. Make : KNORR BREMSE Only.
Connector set with cable for Magnet Valves (One set includes wiring harness & connectors for both Application and Holding Magnet Valves) as per Knorr Bremse Part No. C172368. Make :self (KNORR BREMSE
VALVE CHECK CAST (LIFT TYPE)S-17047-4-PMR9064
SUPPLY OF SLIDE VALVE ACTUATOR AS PER NIT DOCUMENTS
SPARES FOR THE NDHDT VALVE AS PER TENDER DOCUMENTS
HYDRAULIC OIL FOR ROTARY VALVE AS PER TENDER DOCUMENTS
150MM DOPC SAUNDERS WEIR TYPE DIAPHRAGM VALVE TYPE A, 100MM DOPO SAUNDERS WEIR TYPE DIAPHRAGM VALVE TYPE A., 80MM DOPO SAUNDERS WEIR TYPE DIAPHRAGM VALVE TYPE A, 150MM DOPO SAUNDERS WEIR TYPE DIAPHRAGM VALVE TYPE A, 80 MM DOPC SAUNDERS WEIR TYPE ... DIAPHRAGM VALVE TYPE ... DIAPHRAGM VALVE TYPE
Supply of Y Type Globe and Stop Check Valves for CDW and PP Units
SUPPLY OF Y-TYPE GLOBE AND STOP CHECK VALVES FOR CDW AND PP UNITS
SUPPLY OF Y-TYPE GLOBE AND STOP CHECK VALVES FOR CDW AND PP UNITS
SUPPLY OF GATE, GLOBE, CHECK VALVES - CAST AND FORGED FOR CDW AND PP UNITS