Valves Tenders in Madhya Pradesh

Repairing of 450 mm dia. C.I. sluice valve and fixing of new 450 mm dia C.I. suluice valve at Gambhir clear water pumping main pipe line of Dashara Maidan OHT.

REPLACEMENT OF WATER TANK BALL VALVE, HANDLE VALVE, AT TERRACE AND CHANGING OF CARPET AT READER DIAS OF COURT ROOM NO. 9 HIGH COURT OF MP BENCH INDORE

Procurement of Dembla make pneumatic control valves with actuator and its spares for hydrogen generation plant of 2x600 MW and 2x660 MW, SSTPP, MPPGCL, Khandwa.

Supply Installation and Commissioning of complete set of electro hydraulic actuator for Seal and Leak steam control valves for PH II at SGTPS MPPGCL Birsinghpur

Procurement of control valve DR 37 (Without actuator) for HP heater to HP flash tank drip line for 210MW

Procurement of spares for IL Make Control valve for feed regulating station (FRS) of 1X210MW Unit, ATPS, MPPGCL, Chachai.

Procurement of Electronic position feedback transmitter of Gland or Leak steam control valve for PH II SGTPS MPPGCL Birsinghpur

Procurement of spares of Instrumentation Ltd. make pneumatic actuator (On-Off/Control Valve) installed at 2x660MW, SSTPP, MPPGCL, Dongalia.

Air Filter/Element Separator/Hose similar/Indicator Air Filter/Element filter Separator/Pressure Transducer/ Temperature sensor/Thermostatic Control Valve.

Air Filter/Element Separator/Hose similar/Indicator Air Filter/Element filter Separator/Pressure Transducer/ Temperature sensor/Thermostatic Control Valve.

Procurement of Knife edge gate valve for ORBINOX make for Ash Handling System of 210 MW ATPS, MPPGCL, Chachai.

PNEUMATIC BUTTERFLY VALVE DN 80 FOR TC 60 TC 45 CERAMIC VACCUM FILTER, PNEUMATIC BUTTERFLY VALVE DN 40 FOR TC 60 TC 45 CERAMIC VACCUM FILTER, PNEUMATIC BUTTERFLY VALVE DN 50 TC 60 TC 45 CERAMIC VACCUM FILTER, THREE PORT VALVE, PNEUMATIC ADJUST VALVE ... PNEUMATIC VALVE DN15

Repairing and Reconditioning work of Janbujhiri- RD-72.570 Km (scour valve 450mm) and Rannda- Minor RD-74.325 Km ( Air and Butterfly valve 200mm) of OSP Canal Phase-IV-Group-2 at Manawar Distt-Dhar (M.P.)

Procurement of Spares of Generator Cooler Control Valve and Seal Steam Supply Valve of make SAMSON for Unit No. 10 and 11, PH-IV, STPS, Sarni.

VALVE KEY - 1" VALVES - LEVER DIA. 12 MM, VALVE KEY - 3" VALVES - LEVER DIA. 14 MM, VALVE KEY - 4" TO 6" - LEVER DIA. 20 MM, VALVE KEY- 8" & ABOVE - LEVER DIA. 22 MM

General Purpose Ball Valves (V2) (Q4), Sluice Valve for Water Works Purposes (50 to 1200 mm Size) (V2) as per IS 14846 (Latest) (Q3)

Construction of sluice valve and chamber maintenace at ward no.32 Navjivan bihar zone LIG colony Near shivaji complex Sec.2 and Sec.4

Providing and laying of 50 mm dia G.I Pipe line and H.D.P.E pipe line and sluice valve. File no 232/22X9/1. 2nd call

Repairing and maintenance of pipe line and sluice valve with labour and material site ward 35, 42, and 43. File no 144/22X9/1.

Unbranded 1 inch Nominal Size Carbon Steel Screwed end,, Unbranded 1 inch Nominal Size Carbon Steel Screwed end, General purpose ball valve

Unbranded 1 inch Nominal Size Carbon Steel Screwed end,, Unbranded 1 inch Nominal Size Carbon Steel Screwed end, General purpose ball valve

Unbranded 2 inch Nominal Size Carbon Steel Screwed end,, Unbranded 2 inch Nominal Size Carbon Steel Screwed end, General purpose ball valve

Unbranded 1 inch Nominal Size Carbon Steel Screwed end,, Unbranded 1 inch Nominal Size Carbon Steel Screwed end, General purpose ball valve

Procurement of various size ball valve for air, water and acid lines for TMD-OS at 2x660MW, Stage-II ,SSTPP, MPPGCL, Dongalia

Ball valve 32 mm for sanitary facility to RCF drg. No. LW63106 Alt-a, item no. 6. Material & Specification as per drawing.

Procurement of spares for control valve SD 28 of IL make of Boiler Unit No. 10 and 11 STPS,Sarni

Custom Bid for Services - SERVICES FOR REPAIR AND MAINTENANCE OF CONTROL VALVE FOR 01 YEAR AT GAIL JHABUA COMPRESSOR STATION()

Work of Machining of U Sealing Ring of HP control Valve of 2 X 250 MW Units STPS MPPGCL Sarni.

GATE VALVE 4.0 INCH 150, GATE VALVE 6.0 INCH 150, GATE VALVE 14.0 INCH 150 GEARED OPERATED, FLANGE SIZE 4 INCH 150, FLANGE SIZE 6 INCH 150, FLANGE SIZE 14 INCH 150

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3) MSE Exemption for Years of Experience and Turnover

Copper Alloy Gate Valve for Waterworks Purpose as per IS 778 (Q3) MSE Exemption for Years of Experience and Turnover

CAST STEEL, STEAM NON RETURN VALVE SIZE: 150 MM

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3), Submersible Pump Starters (Motor starter controls) (Q3), PVC Insulated Cables for Submersible Pumps - as per IS 694 (Q2) (3 (3 ))

Unbranded Copper Alloy Gate Valve For Waterworks Purpose Screwed Ends 40 mm Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa Solid Wedge Type

Providing and laying and Jointing of sluice valve with labor and material site ward no. 34 and 44 file no. 41/23X9/1, 2nd call

FOR THE WORK OF REPAIR OF C.I. SLUICE VALVE VARIOUS SIZE FOR WATER SUPPLY ARRANGEMNT OF PUMP HOUSE NO. 1 AND 2, BARGI NAGAR COLONY.

Construction of Sluice Valve Chamber Work with Labour and Material at Ward No.40, 47, 48, 50, 52, 53.File no. 46/21X9/1.2nd Call.

Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 (Q3) MSE Exemption for Years of Experience and Turnover

GATE VALVE 1 2 1500 LBS IBR B16 34, GATE VALVE A 105 GR 3 4 1500, GATE VALVE A 105 GR 1 1500, VALVE GATE A216 GR WCB BW IBR 1500 11, VAL GAT THREADED RATING 1500 SIZE 2 I, GATE VALVE 1 2 1500 SW IBR, GATE VALVE 3 4 1500 SW IBR, RJ GATE VALVE SIZE 1 ... GLOBE VALVE 1 ... 1500, VALVE GLOBE ... GLOBE VALVE 15MMX ...

Procurement of spares for Intervalve Poonawalla make butterfly valve installed at CPU Regeneration, DM plant, CW system, RWI system and SSF area of 2x660MW SSTPP, Stage-II MPPGCL, Dongalia

Supply of Valve, Supply of spare plug, Supply of spare seat cage, Supply of spare gasket, Supply of spare gland packing, Supply of spare actuator, Supply of spare smart positioner, Supply of spare AFR, Charges of E C and I supervision, Charges of TPI report

getway 25 mm Nominal Size Carbon Steel Flanged end, General, getway 25 mm Nominal Size Carbon Steel Flanged end, General purpose ball valve

getway 50 mm Nominal Size Carbon Steel Flanged end, General, getway 50 mm Nominal Size Carbon Steel Flanged end, General purpose ball valve

getway 20 mm Nominal Size Carbon Steel Flanged end, General, getway 20 mm Nominal Size Carbon Steel Flanged end, General purpose ball valve

AARKO 1 inch Nominal Size Cast Iron Screwed end, General, AARKO 1 inch Nominal Size Cast Iron Screwed end, General purpose ball valve

getway 15 mm Nominal Size Carbon Steel Flanged end, General, getway 15 mm Nominal Size Carbon Steel Flanged end, General purpose ball valve

getway 40 mm Nominal Size Carbon Steel Flanged end, General, getway 40 mm Nominal Size Carbon Steel Flanged end, General purpose ball valve

getway 32 mm Nominal Size Carbon Steel Flanged end, General, getway 32 mm Nominal Size Carbon Steel Flanged end, General purpose ball valve

Custom Bid for Services - Providing Services for Overhauling of Ms Petrol Make Ball Valve 6IN x 1500 in Insitu condition at BPCL BR

Operation of pumps, regulation of control valves of pumps installed and running maintenance of pumps and pipe line installed for dewatering of mine at Block-B project