Loading
Loading…
Loading…
17,893 results • Latest
Goods Transport Service – Per Trip based Service - As per scope of work; As per scope of work; As per scope of work
BODY POH work of 1050 Wagons (BOXN variant and SS wagons) for a period of one year at Wagon Repair Workshop, Badnera.
Repair/Rehabilitation of Auxiliary motors of 3 phase electric locomotives for ELS/BSL, ELS/AQ, ELS/KYN, ELS/DD and DSL/PA for 2 years.
Improvement of reliability of 4/6 Quad cables on Bhusawal division
S&T work in connection with "Construction of ROB in lieu of a) LC Gate No.36A at Km. 136/16-17 on Pune-Lonavla section. b) LC Gate No.45 at Km. 148/16-17 on Pune-Lonavla section. c) LC Gate No.02 at Km. 199/6-7 on Pune-Daund section. d) LC Gate No.08 at Km. 218/4-5 on Pune-Daund section " in Lonavala-Pune-Daund Section of PUNE Division.
Water proof HDPE/PP Woven Sack (for packing) - OFB (Q3)
Revolving Chair (V5) (Q2)
Custom Bid for Services - Annual Maintenance Contract for HVLS fans for a period of two years at CSMT, BY, DR, LTT, TNA and KYN Similar Category Operation and Maintenance Of Electrical Systems/Electrical Installations
Steel Wire Ropes for General Engineering Purpose (V2) Conforming to IS 2266 (Q3)
Peripheral Nerve Stimulator (Q3)
Paper-based Printing Services - Printing with Material; Book/Booklet; Offset
Stainless Steel Lavatory Door Catch to ICF Drg.No. ICF/SK-5-6-090
SET OF HARDWARE REQUIRED FOR DETC 20T TO [SET OF HARDWARE REQUIRED FOR DETC 20T TOWER WAGON AS PER ANNEXURE ATTACHED ( 1 SET CONSIST OF 38 ITEMS )]
INDUSTRIAL HAND CLEANING PASTE
FLEXIBLE CONDUIT NW 48 TO SPEC/DRG SPEC
SYNDANIYO SHEET MADE FROM CEMENT AND
Set of tools and equipment Required for Road ART/Brake Down Amla (details as per annexure). Test certificate should be from NABL approved lab only.
Heavy Duty Mobile Storage Compactor Movable Storage System confirming to specification attached as Annexure-A
Parallel clamp assembly 150/160 (consisting of parts parallel clamp 150/160 part No. 1051-3
Provision Anemometer (Controller and ala [Provision Anemometer (Controller and alarm indicator) with display panel 4-20 mA for system telemetering to count wind speed at Sub sectioning & Paralleling Post (SSP). Anemometer should be compatible for reading wind velocity & direction, graphic display, velocity range - 0 to 180 KMPH, Accuracy - 0.2m/sec., Direction 0 to 360 degree. (Supply, Installation, testing & commissioning and including necessary modification in SSP & RCE suitable for connecting with M/s. Synergy System Solution RTU having MODBUS or RS485/RS232 communication port (Cup type anemometer required)]
Supply of LED Luminaire (Recessed Lumina
K- Thread Profile Gauge (Plug gauge type) for Trunnion - LH/RH. Size - 55.635 x 6.35 mm - D/Thread. GO & NOGO gauge. Wear Limit - 1 mm Ref. Drg. No. RDSO - SK - 79068 Alt-08 & SK - 99002 Material - Stainless Steel & Hardened.
Bracket for Mounting of S Trap
Knuckle thrower for High Tensile CBC to [Knuckle thrower for High Tensile CBC to RDSO Drg. No.SK-62724, Alt.31, Item No.9 & other technical requirement confirming to RDSO Specification No. WD-70- BD-10 Rev.4 (UVAM RDSO Item ID: 3100446 , Upgraded High Tensile Centre Buffer Coupler for freight stock wagons ,Sub ID: 3100446014, *Knuckle Thrower) ]
LINT FREE WIPING CLOTH SIMILAR WITH FOLL [LINT FREE WIPING CLOTH SIMILAR WITH FOLLOWING SPECIFICATION , MATERIAL - 100% POLYESTER , CLOTH TYPE - KNITTED , COLOUR - WHITE , SIZE -300 MM x 300 MM , RATE OF ABSORPTION - < 1 SECOND , ABSORPTION CAPACITY - 300% BY WEIGHT OF THE CLOTH , BASIC WEIGHT - 130 GSM +/- 5% , LASER CUT SEALED EDGES , SMOOTH & LINT FREE , (NOTE :ONE SAMPLE TO BE GOT APPROVED BEFORE DOING BULK SUPPLY) ]
For Vande Bharat) SUPPLY OF HEALTH FAUC
Supply and Configuration of Digital Tran [Supply and Configuration of Digital Trans- receiver Hand Held 5 Watt VHF.
PARIETEX OPTIMIZED COMPOSITE MESH - 12 CM, CIRCULAR (PC012FX) SPECIFICATON - Polyester with Absorbable Coiiagen Filrn and Pre-Placed Sutures 12cm in Srze Circular
BEARING 6314 RS2Z/C4S1/VT228, Make of SKF/NBC/FAG
Running Contract for supply of Improved Switch Expansion Joint (Complete Set) with firm's rail as per RDSO Drawing No. is T-6902