Civil Construction Tenders

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Gang saw cut stone 30mm thick Red sand stone

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work up to plinth .Concrete of M30 grade with minimum cement content of 350 kg /cumDSR. 5.33.1.2 (Civil)

OD135300/2025-2026:Providing and laying in position machine batched and machine mixed design mix M- 30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. Note: Cement content considered in this item is @ 340 kg/ cum. "for excess/less cement used as per mix design is not payable or recoverable". All work up to plinth level

ke elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For 150mm Dia. (DSR 18.7.8 E&M)‚
#

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as requ ired :Single headed Gunmetal (DSR 18.9.1 E&M)
-

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal(DSR 18.10.1 E&M)


Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : For 200mm dia (DSR 18.12.7 E&M)
×
Providing, Installation, Testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber qasket, GI bolts, nuts, washers etc. as required: For 80mm dia (DSR 18.14.4 E&M)ÆØ
Providing, Installation, Testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber qasket, GI bolts, nuts, washers etc. as required: For 100mm dia (DSR 18.14.5 E&M)ÇØ
Providing, Installation, Testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber qasket, GI bolts, nuts, washers etc. as required: For 150mm dia (DSR 18.14.7 E&M)ÇÍ
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gunmetal (DSR 18.16.1 E&M)ȕ
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Gunmetal (DSR 18.18.1 E&M)Þ

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2way-100 mm dia M.S. Pipe (DSR 18.19.1 E&M)ù

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way-150 mm dia M.S. Pipe (DSR 18.19.2 E&M)û
Supply and fixing of fire extinguisher, ABC Type 9.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. . NSI (Ref. UPPWD SOR ELECTRICAL 2018 Item No 1131B) NOS
Supply and fixing of C02 type fire extinguisher 6.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. NSI (Ref. UPPWD SOR ELECTRICAL 2018 Item No 1132A) Job
Complete design & Drawing of Fire Fighting System at Store Center By Authorised Designer as per site Requirements, direction of E/I and guidelines provided by CPWD specification of works Part-V (Wet Riser and sprinkler system 2020).( NSI ) $
Providing and Fixing one coat of 4mm thick  PYPKOTE or COATEK anti rust pipe protection layer of approved make and quality including approved make primer as per manufactures specification and over lap of 25mm to make an impermeable layer on above MS Pipe 80MM dia size in trenches structural/ masonary etc. complete including surface prepration, cost of all Materials, Labours and T&P etc. as per direction of E/I. NSI 3
Providing and Fixing one coat of 4mm thick  PYPKOTE or COATEK anti rust pipe protection layer of approved make and quality including approved make primer as per manufactures specification and over lap of 25mm to make an impermeable layer on above MS Pipe size 200mm dia (under ground pipe) in trenches structural/ masonary etc. complete including surface prepration, cost of all Materials, Labours and T&P etc. as per direction of E/I. ( NSI ) .
Providing and Fixing one coat of 4mm thick  PYPKOTE or COATEK anti rust pipe protection layer of approved make and quality including approved make primer as per manufactures specification and over lap of 25mm to make an impermeable layer on above MS Pipe size 150mm dia (under ground pipe) in trenches structural/ masonary etc. complete including surface prepration, cost of all Materials, Labours and T&P etc. as per direction of E/I. NSI̲倁爀漀瘀椀搀椀渀最 愀渀搀 䘀椀砀椀渀最 漀渀攀 挀漀愀琀 漀昀 㐀洀洀 琀栀椀挀欀 ᠀倠夀倀䬀伀吀䔀ᤀ†漀爀 䌀伀䄀吀䔀䬀 愀渀琀椀 爀甀猀琀 瀀椀瀀攀 瀀爀漀琀攀挀琀椀漀渀 氀愀礀攀爀 漀昀 愀瀀瀀爀漀瘀攀搀 洀愀欀攀 愀渀搀 焀甀愀氀椀琀礀 椀渀挀氀甀搀椀渀最 愀瀀瀀爀漀瘀攀搀 洀愀欀攀 瀀爀椀洀攀爀 愀猀 瀀攀爀 洀愀渀甀昀愀挀琀甀爀攀猀 猀瀀攀挀椀昀椀挀愀琀椀漀渀 愀渀搀 漀瘀攀爀 氀愀瀀 漀昀 ㈀㔀洀洀 琀漀 洀愀欀攀 愀渀 椀洀瀀攀爀洀攀愀戀氀攀 氀愀礀攀爀 漀渀 愀戀漀瘀攀 䴀匀 倀椀瀀攀 猀椀稀攀 ㄀ 洀洀 搀椀愀 ⠀甀渀搀攀爀 最爀漀甀渀搀 瀀椀瀀攀⤀ 椀渀 琀爀攀渀挀栀攀猀 猀琀爀甀挀琀甀爀愀氀⼀ 洀愀猀漀渀愀爀礀 攀琀挀⸀ 挀漀洀瀀氀攀琀攀 椀渀挀氀甀搀椀渀最 猀甀爀昀愀挀攀 瀀爀攀瀀爀愀琀椀漀渀Ⰰ 挀漀猀琀 漀昀 愀氀氀 䴀愀琀攀爀椀愀氀猀Ⰰ 䰀愀戀漀甀爀猀 愀渀搀 吀☀倀 攀琀挀⸀ 愀猀 瀀攀爀 搀椀爀攀挀琀椀漀渀 漀昀 䔀⼀䤀⸀ ⠀ 一匀䤀 ⤀Ȁ潎ǹ匁甀瀀瀀氀礀Ⰰ 椀渀猀琀愀氀氀愀琀椀漀渀Ⰰ 琀攀猀琀椀渀最 愀渀搀 挀漀洀洀椀猀猀椀漀渀椀渀最 漀昀 圀愀琀攀爀 挀甀洀 䘀漀愀洀 䴀漀渀椀琀漀爀Ⰰ ㄀ 洀洀 搀椀愀 ᰀ圠䤀䴀䌀伀⼀ 一䔀圀䄀䜀䔀⼀ 䠀䐀ᴀ†洀愀欀攀 挀漀洀瀀氀攀琀攀 眀椀琀栀 愀氀甀洀椀渀甀洀 渀漀稀稀氀攀Ⰰ 洀愀搀攀 漀甀琀 漀昀 猀攀愀洀氀攀猀猀 栀漀琀 搀椀瀀 最愀氀瘀愀渀椀稀攀搀 瀀椀瀀攀 愀渀搀 最甀渀 洀攀琀愀氀 挀漀甀瀀氀椀渀最猀 栀愀瘀椀渀最 氀漀挀欀椀渀最 愀爀爀愀渀最攀洀攀渀琀 攀琀挀⸀ 挀愀瀀愀戀氀攀 漀昀 洀漀瘀椀渀最 琀漀 愀渀礀 搀椀爀攀挀琀椀漀渀 椀渀 ㌀㘀 搀攀最爀攀攀 愀渀最氀攀 栀漀爀椀稀漀渀琀愀氀氀礀 愀渀搀 ㄀ 㔀 搀攀最爀攀攀 愀渀最氀攀 瘀攀爀琀椀挀愀氀氀礀 眀椀琀栀 ㄀ 洀洀 䈀甀琀琀攀爀昀氀礀 嘀愀氀瘀攀Ⰰ 洀愀琀挀栀椀渀最 昀氀愀渀最攀猀Ⰰ 渀甀琀 戀漀氀琀 攀琀挀⸀ ⠀一漀琀攀㨀 挀漀猀琀 漀昀 ㄀ 洀洀 戀甀琀琀攀爀 昀氀礀 嘀愀氀瘀攀 椀猀 椀渀 琀栀攀 猀攀瀀愀爀愀琀攀 椀琀攀洀⤀Ⰰ 昀氀漀眀 㜀䬀最⼀匀焀挀洀Ⰰ 䰀倀䴀 ㌀㜀㔀 漀爀 洀漀爀攀 ⠀ 一匀䤀 ⤀
牐癯摩湩⁧湡⁤楦楸杮䠠獯⁥慣楢敮⁴潢⁸楳敺㘠〰㝘〵㉘〵䵍†慭敤漠⁦ㄠ‶慧杵⁥⹍⁓桳敥⁴畤祬瀠楡瑮摥眠瑩⁨佐爠摥瀠楡瑮〠″潣瑡⁳楷桴挠湥牴污㘠浭琠楨正朠慬獳搠潯Ⱳ氠捯慨摮敬†湡⁤楦楸杮猠灵潰瑲漠慷汬䤠据畬楤杮挠獯⁴景愠汬䴠瑡牥慩獬‬慌潢牵⁳湡⁤♔⁐瑥⹣愠⁳数⁲楤敲瑣潩景†⽅⹉⠠丠䥓⤠ÖĈ匀牴捵畴慲瑳敥潷歲椠楳杮敬猠捥楴湯‬楦數⁤楷桴漠⁲楷桴畯⁴潣湮捥楴杮瀠慬整‬湩汣摵湩⁧畣瑴湩Ⱨ栠楯瑳湩Ⱨ映硩湩⁧湩瀠獯瑩潩湡⁤灡汰楹杮愠瀠楲業杮挠慯⁴景愠灰潲敶⁤瑳敥牰浩牥愠汬挠浯汰瑥⹥‮卄⹒ㄠ⸰‱䌨癩汩씩Ḁ蔀ࠀ
牐癯摩湩⁧湡⁤楦楸杮朠湵洠瑥污朠瑡⁥慶癬⁥楷桴䌠䤮‮桷敥景愠灰潲敶⁤畱污瑩⁹猨牣睥摥攠摮 ›㔲䵍丠浯湩污戠牯⁥䐨剓‮㠱ㄮ⸷‱䌨癩汩瀩Ḁ蔀ࠀ
牐癯摩湩⁧湡⁤楦楸杮朠湵洠瑥污朠瑡⁥慶癬⁥楷桴䌠䤮‮桷敥景愠灰潲敶⁤畱污瑩⁹猨牣睥摥攠摮 ›〵䵍丠浯湩污戠牯⁥䐨剓‮㠱ㄮ⸷‴䌨癩汩瀩Ḁ넀慎敭漠⁦潗歲‭䤠獮慴汬瑡潩晏䘠物⁥楆桧楴杮匠獹整湡⁤潃獮牴捵楴湯漠⁦整瑳湩⁧潲浯爠汥瑡摥挠癩汩眠牯獫愠⁴牔湡晳牯敭⁲敒慰物圠牯獫潨⁰潎摩⁡敳瑣牯〭‹楄瑳⵴慇瑵浡䈠摵桨渠条牡⼮敔摮牥匠数楣楦慣楴湯丠›ㄠ‸䔯䑃⽃婇⽂〲㐲㈭d

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR. 10.2 (Civil)