Loading
Loading…
Loading…
6,388 results • Best match
Providing Fencing Work and Plantation Work for Park Land at Zone 4 in Hosur City Municipal Corporation.
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
Wheel Shop Annual Shutdown 2026, Work No. 7 (MMR).
1. Marking, cutting, grinding and drilling of angles and plate sections for fabrication of C-20 conveyor upper and lower tracks. (Approx length- 45mtrs) 2. Marking, cutting, grinding and drilling of angles and plate sections for fabrication of C-20 conveyor upper and lower track supports. (Approx length- 45mtrs) 3. Marking, cutting, grinding and drilling of guide roller brackets and its supports. (Approx length 40 meters) 4. Dismantling of 10" pitch main chain. (Total length Approx. 185 Mtrs.) 5. Dismantling of existing upper track, lower track & supporting structures. 6. Fabrication and fitment of upper track with 12 mm thickness bright flat, lower track with 6 mm thickness bright 1 flat, its supports and check for proper alignment. 7. Replacement of tail and drive end conveyor pieces and its supports. 8. Replacement of Escapement and its supporting structures 9. Fitment of 10" Pitch main chain. 10. Fitment of guide roller bracket assembly and check for free movement of mould boxes. 11. Replacement of drive triplex/ duplex chains and defective sprockets. 12. Replacement of drive belts and defective drive pulleys. 13. Servicing of RC Fan assembly. (Servicing includes replacement of bearings, belts, defective pulleys & dynamic balancing of impeller along with shaft). 14. Painting of entire conveyor structure with Red-oxide & apple green paint. 15. Disposal of released material to earmarked place. 16. Supervisory Charges 17. Balancing charge for R.C fan assembly of MHO
REPLACEMENT OF PAN SUPPLY TANK 3 NOS
Replacement of Pan Supply tank -3 Nos Rate should be quoted MT basis only Scope of work: 1) Dismantle the existing damaged Pan Supply tank, weighed and leading to scrap yard through our mill stores. 2) Fabrication and erection of Pan Supply tank as per the existing manner welding on both sides (2 layer). 3) The approximate quantity of work will be around 16.00 MT. 4) Hydro test is to be carried out to check the leakages.
Providing, Installation, Testing and Commissioning of Submersible Pump set having specifications 30000 GPH X 60 Mtrs head along with allied works at T/well University Era under JMC Capex (New Works) 2026-27.
Providing, Fitting, Installation, Testing and commissioning of 01 no. submersible pump sets of specification 30000 GPH X 60 mtrs head at Tube Well University ERA by way of fabrication and fitting of 01 no. U - shaped tie rod / clamp which is to be fabricated out of MS flat and to be fitted with submersible pump set by providing and fitting of bolts and nuts which are to be welded on both sides of the clamp for pump set. The job also includes fabrication of 01 no. expander /reducer nipples for NRV of required size which is to be fabricated out of MS pipe threaded at one end and flanged at the other end for pumpset, Job also included providing and fitting of 1 nos. sluice vale size as per the site condition and fabricate the rising main pipe as per valve length. Fitting of reducer / expander nipple at one end with flange joint and with the discharge outlet (NRV) of the submersible pump at the other end for pump set. Job includes extraction of old sub pump sets then lowering of submersible pump sets and column pipes one by one by fastening the nuts and bolts and insertion of rubber insertion sheet. Job includes rebate on older parts, Job also include complete connection of pump sets to the panel. The complete job includes cost of materials i.e. Submersible Pump motor sets, cables, thimbles, nuts, bolts, rubber sheets and labor charges. Job also involves carriage and shifting of pump set and lowering of submersible pump set. Making connections with the panel for testing of submersible pump set on full load at site. Complete job.
as per tender document
Showcases & Box wooden including required carpentry work, plish of existing wooden railing Supplying, Fabrication and Installation MS Pipe Frame Cladding 18mm WPC Fixing with Screw finishing with Putty and paint etc. including cost of carriage all labour, material and other incidental charge etc.
MOUNDED STORAGE BULLTES (SITE FABRICATED) FOR POLYPROPYLENE PROJECT OF M/S NUMALIGARH REFINERY LIMITED
Construction, fabrication of Mounded Bullets and installation, of all work in Bidder’s scope in all respects including Transportation and site handling of material / equipments, supply of consumables, tools and tackles, field engineering services, Receipt, storage, conservation, preservation of contractor supplied items. Fabrication, construction, assembly, erection at site for all piping, civil, structural, CP for Mounded Bullets, mechanical, electrical and instrumentation works within battery limit, refractory, insulation, coating, painting, testing, etc. providing all temporary works / structures and equipment for completion, obtaining statutory approvals, hydro-testing of Mounded Bullets & piping, completing all the work in all respects to make system smooth, operable and handing over as per Bidding Document requirements and instructions of the Engineer In Charge.