Fabrication Works Tenders

Fabrication and Supply of MILD STEEL WINDOW of size 0.90m X 1.20m with Single leaves,outer frame made of 35x35x5 mm equal M.S.L. angle and shutter frame made of 25x25x5 mm equal M.S.angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2 Nos horizantal and 3 Nos diagonal for each shutter using M.S. flat of size 20x5 mm fully covered with 18 guage plain M.S. full sheet whelded with shutter frame neatly and also fixing by welding 6 Nos holdfasts,2 Nos of wind appliances, 3 Nos of tower bolts, 1 No aldrop 3 Nos of handles, fixing the shutter with 6 Nos of hinges without frame of the door including painting the whole unit with one coat of best quality of redoxide primer.

Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars,flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide

8240100024 FABRICATION AND LAYING OF HIGH STRENGTH RIBBED DEFORMED BARS/MS BARS

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480Cum,6mm HBG Crushed metal 0.320Cum,sand 0.400Cum and cement 350Kgs with water cement ratio of 0.53(185.50 ltrs/Cum of CC) etc., from any source confirming to the relavant ISI standard including cost and conveyance of all mterials like cement, fine aggregare (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing,centering charges,shuttering chargesc etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, for finished item of work.

Steel work in built up section , including cutting, hoisting , applying steel primer coat for fabrication of door, windows, Modification/fabrication of the base frame as per site requirement

Fabrication of Fuse Set structure by using M.S. Channel (125x65x6) mm size and 3.5 m minimum height with 2 Nos. M.S. Angle (75x75x6)mm size on top of structure for installation of Fuse Set.