Fabrication Works Tenders

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Supply and fixing of M.S Grills with Doorsand Windows with one coat of Redoxide with Primer including all costs such aswelding,grinding and fabrication charges,cost and conveyance of all materials to siteetc,complete as per standard specification

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kg with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, centering charges, shuttering charges for finished item of work (APSS No. 402) Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing. -do- 50mm thick precast slabs

Fabrication, Supply and erection of portable Job Cabin using PUP(Polyurethane foam) Body size 8m X 5m X 3.05m H, Including 50mm Thick Wall and roof PUF Panels, Gl Sheets Tubes, Nuts and Bolts, Painting, Welding Sealant for sheet Bunding. Insulation Bed room size 16 feet*9feet, Toilet-2Nos-5*3.5 feet, Kitchen-5*7 feet, Hall 10*16 feet, Passage 6*7 feet. "Components" *Bottom Frame Galvanised Iron C section of size 80mm X 52mm X 2MM Thick. Top Frame C- Section of size 80mm X 52mm X 2mm Thick Side Wall Using PUF sheets of 50mm Thick Verticals. C-Section of size 80mm X 52mm X 2mm Thick. Roofing: Using PUF sheets of 50mm Thick Sretcher: C-Section of size 80mm X 52mm X 2mm Thick Door Im X 2.13m-4No's of Using PUF sheets of 50mm thick with std hardware locks and handle's. Toilet door: 2.5 ft X 1.8 M-1 No's of Using PUF sheets of 50mm thick with std hardware locks and handle's Windows: Im X 1.22m6No's of using double shutter sliding aluminium powder coated windows of 1.3mm thicknesss with 4mm thick glaas with safety grill made of MS rods for all windows and Canopy on the top of windows. Ventilators 211 X 2ft-2 No's Aluminium coated ventilators of 1.2mm thickness with 4mm thick glass with safety grill made of MS rods. NOTE-1. Cost includes fabrication at site, labour charges, transportation, loading, unloading and GST ii. Payment to be done after completion of work in all aspects. Required modifications in design and execution are to be made as per the instructions of Engineer-in-charge at no extra cost. iii. GAD of the prefabricated structure and material test reports from NABL accredited laboratories need to be submitted before dispatching the structure to the site and final decision will be taken by Engineer-in-charge. iv. One sample strucure to be made ready in the manufacturing location and only after inspection and written approval by a representative of the Engineer-in-charge, all structures should be dispatched, v. PG will be released after completion of one year maintenance period. And during one year maintenance period no extra payment will be made if any repair works are carried out. vi. There should be less plumbing work with water light structure. Cost excludes civil work up to plinth level and electrical. (Ubit=total Job) HUBLI DIVISION-ENGG/SOUTH WESTERN RLY

3D Wall Paneling: Supply, fabrication, and installation of 3D decorative wall panelling of approved design, texture, and finish — complete in all respects, including surface preparation, fixing frame (if required), adhesive, joint finishing, and painting/

Fabrication Providing and Fitting of steel bush of following pumping units as under