Mechanical Works & Maintenance Tenders

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m Ordinary rock( 4 X 3.3 x0.9144x0.9144)

Cutting and disposal of earth work in by mechanical in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All the surplus excavated earth to be dumped at dumping site(dumping sites will be arranged by the contractor on his own cost). Any loss to the public and private propriety, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Carriage of Sand from Source to site of work by Mechanical transport including loading /Unloading complete for an avg dince of 110 km by MT

Fabrication : Structural Steel (General) including CGS Gate with V Track Rail (MS). Structural Fabrication Works - Supplying, Fabricating, Erecting & Fixing in position structural steel items viz. structure, trench covers, dispenser frames, cascade structure, pipe support, valve support, hand railing, ladder, staircase, clamps, brackets and all miscellaneous steel works as detailed and as directed by EIC at all levels using MS angles, beams, channels, tees, plates, pipes, rounds, squares, flats including hard wares like hinges, nuts, bolts, washers, etc. of various sizes and other structural steel sections conforming to IS 2062 including straightening, cutting, fabricating, welding, bending to shape, bolting, fixing in position, welding to other MS structure item or insert plate embedded in wall/concrete at site and finished the surface neat after grouting. Rate shall include for painting with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer, etc. complete, as directed by Engineer In charge. Material shall be of TATA/VIZAG/SAIL/ESSAR or other equivalent make only. Actual/Net quantities measured shall be paid. Weight of washers, nuts & bolts shall not be paid extra. Note : 1. Welding rods of Adani or Ador make only to be used. 2. ISI marked E-7018 to be used for welding on beam or truss part and 6013 for rest or as directed by Engineer-in-charge. 3. Welding rod to be preheated to 60 degrees centigrade before usage. 4. If fabrication work is done at site then contractor will have to bear the electricity consumption charges.