Painting Works Tenders

FIXING OF M.S. SIGN BOARD AT WORK SITE WITH PAINTING AND WRITING INFORMATION ABOUT CHECK DAM,

Painting or varnishing work in small area or new with Two coat of approved suprior quality

painting in iron work.

OHT Construction of OHT(200KL/20M Staging) inluding all Supply all materials, labours and t&p etc. required at the site of work and construct R.C.C. over head tank above mentioned capacity and staging including the cost of construction of following appurtenant works. 1m wide R.C.C. balcony alround the tank, 1m wide R.C.C. stair case from ground upto the balcony of the tank, Lightening conductor as per Indian electricity rules., Water level indicator as per deptt. specification 20 mm. G.I. pipe railing with 50 x 50 x 6 mm. 1.2 m. high angle iron posts1.5 m. c/c on both sides of the stair case (pipe in 3 rows) and balcony (pipe in 3 rows) 50cm. wide M.S. ladder with 50x50x6 angle iron and 20 mm. rungs at 25 cm. c/c/, from balcony to the top dome of the tank and from there to the bottom dome of the tank inside it. 60x60 cm. M.S. manhole cover (light pattern)with locking device. Supply, erection, fixing in position and jointing of following D.I.D/F pipes with sluice valves and specials, ISI marked D.I.D/F pipes, K-9 class 'A' as per IS-1537/1960, Inlet- 200 mm, Outlet- 200 mm, Over flow - 250 mm, Washout - 100 mm. ISI marked C.I.D/F sluice valves as per IS- 780/1969, Outlet- as per distribution dia - 1 No. Washout - 100 mm - 1 No, ISI marked C.I.D/F specials as per IS 1538, Clamping the vertical pipes with columns by clamps of 50 x 6mm. M.S. flat 1.5m c/c/ including the cost of all jointing materials such as nut bolts and washers etc. Weather proof painting on outer surfaces of R.C.C. work with ISI marked cement paint in 3 coats. Painting of M.S. ladder, railing and vertical pipes with ISI marked enamel paint in 3 coats. Floor and apron at the ground level upto 15cm. beyond the entire projected area of the O.H.T. with 25mm. 1:2:4 P.C.C. over 75 mm., P.C.C. 1:4:8 as per deptt. specifications. Sluice valve chambers - 2 Nos. (As per type design) Testing of tank for water tightness etc. for propoer completion of the work. Apex painting over exposed part of OHT with 2 coats of approved apex paint over priming coat complete. Site. clearance

Painting or varnishing new work work on grill or gate with one coat of rady mixed priming paint and tow coat of approved superier quality rady mixed paint including supply of all material Labour T&P etc. Required for proper Completion of work. Paint to be used should confirm the ISI No. 103 1950 (S.I.No. 641+642), Railing, Gate, 2nd Gate, Gate3

Taking out carefully the Centrifugal pump upto 12.5 HP capacity from its foundation duly decoupling the suction and delivery lines and transporting the pump to civil workshop, dismantling and strip opening the complete pump and sort out the defective spare cleaning/servicing the pump by renewal of defective spare like brass bush-02 Nos, ball bearing of existing size-02 Nos, rubber for studes of existing size and other packing materials, greasing all spares, necessary lathe mechinery and welding work, painting of pumps with two coats of synthetic enmelled approved paints after preparation of old painted surfaces of pump set, refixing and alignement with motor on its original location including testing complete all as specified and directed. Note : The cost of spare parts shall be measured and paid seperatly under relevent item of this BOQ as supply only.