Loading
Loading…
Loading…
2,192 results • Best match
Design, Manufacture, supply, testing and commissioning of 2 Nos - Service-cum-passenger lift of 2 Tonne capacity at Yesvantpur Parcel office, 6 Nos- 20 passenger lift Machine room less at Hebbal, Banaswadi and Anekal Road Railway Stations
RFP for Construction of 8 Nos. of Major Bridges and rebuilding of 3 Nos. of ROB, including associated S and T works in connection with Aluabari Road (AUB)-New Jalpaiguri (NJP) 3rd and 4th Line (57Km) of Northeast Frontier Railway .
railway store to site of work duly
Electrical work in connection with provision of Electronics interlocking under remodeling work at LJN yard, Proposal for extension of electric loco shed at Lucknow Jn. yard, CYM Building at coaching Depot ASH and development of goods platform ... BKT Railway Stn.
Excavation of trenchless track by horizontal direct drilling (HDD) method under 47 Railway track/busy road etc. at a depth of minimum 120 CM below ground level as per direction of site engineer incharge along with Supply and Laying of HDPE Pipe of 150/160 mm inner dia confirming to relevant IS in HDD portion. (HDPE Pipe shall be supplied by Contractor)
Survey Design Drawing Supply Erection Testing and Commissioning of 220 KV DC Transmission Line on DC Towers (07 KM Approx.) from Humnabad GSS to Humnabad Railway Traction Substation (RTSS) (with identification and resolution of RoW issues by payment
2: Conducting drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements of vertical,horizontal and ground clearnace of the LT/HT/EHV/P&T lines, major roads/railway/river crossing/buildings, vegetations, etc., which is found to cross or running in parallel with the KPTCL exisiting EHV lines and sag measurements and other works
Work involving the installation of signage at three encroachment-prone locations within the Shamli Municipal Council area near the District Judge residence on Jhijhana Road, near the Dhimanpura railway crossing, at the Vikas Nagar board site, and
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders ete, as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). (5879.90x0.735x110.21/107-4451.37)
S&T works in c/w (i) construction of two no. RCC box bridges of size 3.00mX2.50m each at Km 505/4-6 on JUC-ASR section and OHE 6/9-11 on ASR-PTK section by municipal corporation, Amritsar (pushing method for crossing of water pipe) in the ... misc. works in ... Lodhi Railway station ... the Railway boundaries.
separately for each cable through the salwood plank & all cable entry points on location boxes, location huts, JB's relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Description for terminal drawing of circuits, inside app. Case. Painting from outside as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS specification, non-deteriorating type HRC fuses, bases, nuts and bolts and other items shall be supplied by the contractor. Relays, ARA terminals only shall be supplied by the railways. (Inspection: Site Engineer)
