Street Lighting Tenders

SOLAR STREET LIGHTING SYSTEM: * 30Watt Solar Semi Integrated street light (LED Make:Osram/Philips) * 24AH 12.8V LiFEPO4 Battery with mppt Charge Controller. * 75 Watt solar PV Module. * 1.Supply of 5m height 5 inch dia GI (Average dia tappered from bottom to top) tubular pole and at the bottom one base plate of size 30 x 30 x 5 mm having a through hole of size 14 mm dia at the centre of the ase plate with recuired nut and bolt with pole cap Pole with Light arm and PV Structure. 2.Painting of tubular pole with arms with ant coat of red oxide primer and two coats of aluminium paint and bottom one meter with black paint with supply of paints and labour. 3.Labour charges towards installation of 5 mtr height steel tubular pole including concreting of pole base and couping with supply of concreting materials as per following specification. Planting depth of,1.5 mtr pole pit size 1.2 x 1.2 x 1.8 m concreting- 1:4:8 with 4 cm HG metal size and couping of standard size into 40 cm X 40 cm X 50 cm with cement concreting 1:2:4 uaing 20 mm BHCBG chips. This includes the cost of all concreting materials, labour and hire charges of all T&P materials. The pole is to be installed in proper alignment as per the direction of Engineer in charge, and enclosed drawing and specification. Transportation & Installation charge with concrete work.Complete 5 years warranty.

Supply and fixing in replacement of LED street light fitting 70 watt complete with Pressure die cast aluminum housing enclosed with Heat resistant glass cover in frame complete with IP 65 protection and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable including mounting on pole, complete all as specified and directed. (Make: C&S Cat Part No. LTESSI45WLED or equivalent in Bajaj/Wipro/Philips.

27 27 SETC of LED street Light Roadway fittings in Numbers 16.00 3796.85 60749.60

Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

P&F of ip 65 protected LED street light fixture 70-75 watt. (with surge protection device 10 KA) applicable for area lighting with extruded pressure diecast alluminium housing, system lumens efficacy of 100 1 m/watt. Minimum' toughened glass with diffuser, suitable lenses on LED, 240 V, 50 Hz of high power LED lemps supplyied with pre wired cabble of 1 mtr. integrated driver shall be high efficiency having efficiency >85% and in compliance to IEC standards system life of 50000 burning hours, CRI> 80, PF> 0.90 at full load, CCT 5700-6500 K (As per direction of Engineer incharge) fixtures shall be CE compliance. (E-301100)