Street Lighting Tenders

Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 90 watt

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range 0o to 45o C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66, IK - as specified below, CRI >70,

Supply and fixing LED light fitting for street/security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with toughened glass and individual high power LED with secondary optics of capacity 70/75 Watt 240 volts AC 50 Hz , IP 66 protection including pole junction box, electrical connection and five years on site warranty from manufacturer complete all as specified and directed.

Supply and transportation of and fixing of 90W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. , with necessary wire connection including all labour charges fixing as directed by the department etc., complete a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Valmont (Supernova) Greenlites(HI-Lux) / Capart(Premium) /Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06)/Orient (Fiesta Plus) /Bee-lite(Gritty) /Ecolink(Durastreet Gen-II) /Pro-Lite(GLM) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Supply Erection Testing and commissioning of 45W LED Street light fitting made up of pressure die cast Aluminium alloy for housing (heat sink) for effective thermal management ,optic lens and glass diffuser for uniform light distribution with LED Efficacy of 130 lumens/watt,10kV SPD and 50000 burning hours,IP 66 protection,working on 100-285V,50Hz.The fitting should be fixed on octagonal pole/wall including wiring by 3x1.0 Sqmm copper wire in an approved manner and as directed by Engineer in charge at site. The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition of contract para 3.7.

M & L for removing the existing street light fitting of any type & make and supply & installation of new 90 watts LED 5700K new generation energy saving & environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source in existing pole duly wired complete all as specified and directed.