Loading…
Loading…
694 results • Best match
Invitation of e-Quotation for framing of SOR-2026-27
Scrap tyres of size 900 x 20
Construction of 220KV D/C Transmission Line from PMTL, Chandauti to IMC ,Dobhi (RL - 22.9 KM ) with ACSR Zebra Conductor along with Construction of 02 nos. 220KV Line Bays at Chandauti PMTL Substation on Turnkey basis.
4.11 Battery and Battery Chargers
SUPPLY OF AERIAL FIRE FIGHTING EQUIPMENT
Power Distribution Module/ Power and Control Module Power distribution module shall be compact and portable. Electrical power for operation of the system shall be independent of helicopter power. The bucket shall be connected to the Power Pack by a breakaway plug, in case of emergency jettisoning requirement and force required for the same shall be specified. Amount of force required for breakaway shall be lesser than the empty weight of the bucket itself and the same shall be specified. Power distribution module shall typically comprises of the following: • Battery • Control Pendent (2 nos) • Electrical cable with breakaway connector • Battery status indication • Charging port Anchor points shall be provided for fixing the power control module equipment on helicopter floor board. The Power Pack shall be strapped/mounted to the floor of the helicopter. Following control shall be available in power pack control pendants: • Dump switch • Shallow Fill Pump switch • Foam controller switch Power distribution module shall have breakaway connectors in power connecting lines for easy jettison of bucket in case of emergency and shall have provision for grounding harness to prevent static charge buildup. Power distribution module shall be compatible for 6 to 10 hrs of operation and complete recharge within 2 hours (desirable). Charger shall be compatible with 120 VAC/60 Hz or 220 VAC/50 Hz power sources. The Power Pack shall also include a dump switch harness to operate the bucket valve, a bucket wiring harness to connect to the bucket and a grounding harness to ground the system to the airframe to eliminate static charge buildup. All of the wiring harnesses and power cords shall be stowed inside of the Power Pack casing. A manually operated circuit breaker shall be available on casing to disconnect the battery power from the bucket harness. Characteristics • Helicopter Power Supply: 28 VDC • Charger Voltage: 120VAC / 240VAC • Charger Power Frequency: 50 Hz • Charger Socket: Shall be specified by vendor • Battery Type: Shall be specified by vendor • Battery Capacity: 6 to 10 hrs of operation • Recharge Time: 2 hours (Desirable). Actual time shall be specified by vendor • Physical Size & weight: Shall be specified by vendor o Battery o Control Pendants o breakaway connector etc. • Breakaway connector separation force : Shall be specified by vendor
Supply of lab items and other items
Blood Collection monitor that Should have slip free safety clamp, detachable tray with integrated filter holder, LCD display, audible alarm alert function, volume selection function for all types of bags, 12hr minimum battery backup, with standard accessories, biannual calibration with 36 months complete standard warranty. Blood Collection monitor that Should have slip free safety clamp, detachable tray with integrated filter holder, LCD display, audible alarm alert function, volume selection function for all types of bags, 12hr minimum battery backup, with standard accessories, biannual calibration with 36 months complete standard warranty.
Purchase of 11KV 400 Amp A.B.Swicth with Polymeric Insulator.
1. Distribution Transformers (All types), Meters of all types, Conductors,
For supply, installation and commissioning of Campus Networking System for the department of IT Cell.
32 UPS Supply of 5 KVA, ON Line UPS Single phase input and single phase out put power system of in put voltage 100V/ AC +/- 5% to 300V AC +/- 5% , Frequency range 40 HZ to 60 Hz, +/- 10% and out put voltage range 415V +/-1%, AC frequency range, 50Hz, +/-1% power factor>_ 0.90 @ Full Load, 0,8/3.1, Harmonic distortion - 2% THD (Linear Load): 5% THD (Non- Linear Load) along with required Batteries, Battery Stand, UPS Box Battery Lead etc as required. (minimum 30 minutes back up); Preferred Make- Delta/Gutur/BPE