ATHARVA LABORATORIES PVT LTD

tactical boot pu sole Tactical Boot Pu Sole ( 16243 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Conforming to Footwear Design and Development Institute, A 10, Sector 24, Noida, specification number FDDI/TA/19 forwarded by DG CRPF vide letter No- U.II-98(Spec)/2012- 13-Prov (Tactical boot) dated 15-10-2015. - URL for Specification and Drawing for Tactical boot (PU Sole) http:/dgserver.dgsnd.g ov.in/rc/46181600.pdf - Specification and Drawing seen and understood Yes - SIZE Size 12 5, 6, 7, 8, 9, 10, 11, 12, Asso rted Sizes ( 5, 11 and 12 ) as per buyers requirements COLOUR Colour Black - MATERIALS Vamp & Quarter BLK/BWN BUFF Barton Printed (2.0-2.2 mm) Leather Components As Per IS Specification IS: 15298 (Part IV) - 1/4 Toe BLK/BWN BUFF Smooth (1.3-1.5 mm) Leather Components As per IS specification IS: 15298 (Part IV) - Counter BLK/BWN BUFF Smooth (1.3-1.5 mm) Leather Components As Per IS Specification IS: 15298 (Part IV) - Vamp lining Non Woven (1.1 mm) (min) - Top puff Thermoplastic 2.0 mm - Stiffener Thermoplastic 2.0 mm - Collar PU Foam of 15 thick. Density 25 kg per cub.m - Socks full Drill cloth laminated with 2 mm EVA - Thread 20/3, Nylon - Eyelet 600 No black/brown brass with inner diameter 5 mm - SOLE Sole PU polyester - Sole Fixation Direct moulding process - Sole thickness Clause 6.4.2-IS 15298 (Part II) 2011 - Sole hardness 55 Shore A as per SATARA TM-205 - Sole flexing resistance Max Cut Growth 4 mm Till 30, 000 Cycles As Per IS 15298 (Part 1) 2011 - LACES Lace Material and Colour Nylon of matching colour - Lace Length and Breaking Strength 130 cm (min) and Breaking Strength 750 N (Min) (20 cm Between Grips) As Per IS: 1969 - OTHER REQUIRMENTS Mass 900 gm/pairs for size 8 and ±5 percent increase/decrease per size - Back height 170 mm for size 8 and ± 5 mm increase decrease per size - 2/4 Water vapor permeability 0.8mg/square cm/hr (min) as per IS 15298 (part1):2011 - Strobel Antistatic 2.0 mm (min) - TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. true true Test Report No. 5709 - Test Report Date 12-4-16 - Name of the Lab Idma Laboratories Pvt Ltd - Address of The Lab 391 Industrial Area Phase 1 Panchkula Haryana - Test reports to be furnished to buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 T MOHAN 734011, BSF CAMPUS, SHIB MANDIR ROAD, KADAMTALA. 16243 90 EMD Advisory Bank HDFC Bank EMD Percentage(%) 2.00 EMD Amount 263137 ePBG Advisory Bank State Bank of India ePBG Percentage(%) 2.00 Duration of ePBG required (Months). 12

boot ankle textile jungle boot direct moulded pu sole in pairs Boot Ankle Textile Jungle Boot Direct Moulded Pu Sole In Pairs ( 2287 ) Technical Specifications Specification Specification Name Values Allowed Values specification Governing Specification Conforming to FDDI (FOOTWEAR DESIGN & DEVELOPMENT INSTITUTE, A - 10/A, Sector-24, NOIDA) Specification No. FDDI/SPEC/Jungle Boot/08:2014 (Revised), approved by MHA vide their letter N o-U.II-98(Spec)/2012-13 -Prov-9775 dated 10/12/2014, and as per following technical requirements - SIZE Size Assorted sizes (5, 6, 7, 8, 9, 10, 11 & 12) as per buyer's requirements Assorted sizes (5, 11 & 12) as per buyer's requirements COLOUR Colour Olive Green Olive Green Colour of Sole and Toe Cap Black ( For all other Boots) - MATERIALS Upper Material Upper shell consist of Polyester viscose fabric, Water Repellent as an outer layer and - 1/5 100 % non-woven Nylon (cambrille type) lining as an inner layer. The two fabrics shall be adhered together with flexible adhesive and polyurethane foam of 5 mm thickness. Blend Composition of polyester viscose fabric water repellent Polyester-80% Viscose- Remainder - Binding material of Polyester blended fabric, black having blend composition of Polyester-67%, Cotton-33% & confirming to IS:15852-2009 for colour fastness to light, washing & pH value YES - Insocks Covered with cambrille type non woven material black - Thermoplastic Toe Puff and Counter Stiffner Thickness when extacted from boot shall be 1.7 mm to 1.9 mm YES - Full Chrome Leather for Toe Cap and Arch piece confirming to IS 5677-1986 for Heat resistance, Colour fastness to rubbing crocking, Solvent extractable substances, water soluble matters, Chromium contents & pH value of water soluble YES - Thickness of Full Chrome Leather for Toe Cap and Arch Piece shall be 1.2 mm to 1.8 mm YES - Length of Nylon Laces (cm) 160 - Width of Laces (mm) 6 - Breaking Load of Laces ( 20 cm between grips ) 750 - 2/5 (Test Method- IS: 1969) Mass per 10 pairs of Laces (g) 125 - Dye Fastness to Washing for Laces shall be above 4 (Test Method- IS/ISO 105-C10: 2006) (Test Condition as per table-2, Test Number- C(3)) YES - Dye Fastness to Light (Test Method- IS: 2454) for Laces shall be above 4. YES - pH Value of aqueous extract shall be 6.5 to 8.5 for Laces YES - Sewing threads Polyester Sewing thread confirming to IS 9543-1980 (Variety No- 7) - OTHER REQUIREMENTS Mass per pair for Size-8 shall be 750 to 850 gms (with increase or decrease of 50 grams for each bigger and smaller size respectively) YES - Leg height for Size-8 shall be 160 mm (with increase or decrease of 2 mm for each bigger and smaller size respectively) YES - SOLE Sole Direct Moulded Polyurethane - Minimum thickness of sole (mm) 4 - Cleat height (mm) 2.5 - Thickness of sole when measured at forepart from outside with side wall (mm) 20 - Thickness of sole when measured at waist from outside with side wall (mm) 16 - Thickness of sole when measured at heel from 35 - 3/5 outside with side wall (mm) TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. YES - Name of the Lab ITC - Address of The Lab PANCHKULLA .HARYANA - Test Report No. NA - Test Report Date NA - Test reports to be furnished to buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SUBRATA SAHA ROY 263645, O/o The Inspector General, Ftr Hqrs, SSB Ranikhet, Ganiyadeoli, PO.Ranikhet 2287 30 EMD Required No ePBG Required No