TECH-FAB INDUSTRIES

WASHERS AS PER SPECIFICATION, HORIZONTAL CROSS OF 900 mm BENDING RADIUS 2mm THICK FOR 600 mm WIDTH LADDER TYPE_CHANNEL TYPECABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, COVER 1.7mm THICK ALONG WITH TOP and BOTTOM CLAMP STRIP ACCESSORIES FOR 600 mm WIDTH LADDER TYPE _CHANNEL TYPECABLE TRAY EXCLUDING NUT BOLT WASHERS, COVER 1.7mm THICK ALONG WITH TOP and BOTTOM CLAMP STRIP ACCESSORIES FOR 300 mm WIDTH LADDER TYPE _CHANNEL TYPECABLE TRAY EXCLUDING NUT BOLT WASHERS, 600 mm WIDTH 2.5M LENGTH 2mm THICK PERFORATED TYPE STRAIGHT RUN CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, 300 mm WIDTH 2.5M LENGTH 2mm THICK PERFORATED TYPE STRAIGHT RUN CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, 150 mm WIDTH 2.5M LENGTH 2mm THICK PERFORATED TYPE STRAIGHT RUN CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, HORIZONTAL TEE OF 900 mm BENDING RADIUS 2mm THICK FOR 600 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, HORIZONTAL TEE OF 600 mm BENDING RADIUS 2mm THICK FOR 300 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, HORIZONTAL BEND OF 900 mm BENDING RADIUS 2mm THICK FOR 600 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, HORIZONTAL BEND OF 600 mm BENDING RADIUS 2mm THICK FOR 300 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, VERTICAL UP OF 900 mm BENDING RADIUS 2mm THICK FOR 600 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, VERTICAL UP OF 600 mm BENDING RADIUS 2mm THICK FOR 300 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, VERTICAL DOWN OF 900 mm BENDING RADIUS 2mm THICK FOR 600 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, VERTICAL DOWN OF 600 mm BENDING RADIUS, 2mm THICK FOR 300 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, HORIZONTAL CROSS OF 900 mm BENDING RADIUS, 2mm THICK FOR 600 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING COUPLER PLATES NUT BOLT WASHERS AS PER SPECIFICATION, COVER 2.5M LENGTH 1.7mm THICK FOR 600 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING SELF TAPPING SCREWS, COVER 2.5M LENGTH 1.7mm THICK FOR 300 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING SELF TAPPING SCREWS, COVER 2.5M LENGTH 1.7mm THICK FOR 150 mm WIDTH PERFORATED TYPE CABLE TRAY EXCLUDING SELF TAPPING SCREWS, COUPLER PLATE FOR 100 mm and 75mm HEIGHT CABLE TRAY Type-A, M8 BOLT FOR CABLE TRAYS, M8 NUT FOR CABLE TRAYS, M8 WASHER FOR CABLE TRAYS, SELF TAPPING SCREWS 6mm DIA FOR PERFORATED CABLE TRAY COVERS

300 mm wide straight run cable tray, 750 mm wide straight run cable tray., Reducers 750 - 300 RHS., Reducers 750 - 300 LHS., Horizontal bends for 300 mm wide tray with 1000 mm bending radius., Horizontal bends for 750 mm wide tray with 1000 mm bending radius., Vertical outside bends for 300 mm wide tray with 1000 mm bending radius, Vertical outside bends for 750 mm wide tray with 1000 mm bending radius., Vertical inside bends for 750 mm wide tray with 1000 mm bending radius, Tee joints for 750 mm wide tray with 1000 mm bending radius., 300 mm wide using 50x50x6 mm angle on both sides., 750 mm wide using 65x65x6 mm angle on both sides., Galvanised slotted channel trays of 2 mm thickness, 100 mm wide. and 50 mm high for supporting cables., For 300 mm wide straight run cable tray., For 750 mm wide straight run cable tray., Run of Duct 800 mm W X 400mm H, Run of Duct 1200 mm W X 400mm H, Tray of 60 mm W x 40 mm H with cover, Tray of 150 mm W x 40 mm H with cover, Tray of 300 mm W x 40 mm H with cover