welding cable Welding Cable ( 700 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing specification Conforming to IS:9857 latest * ISI Marked Yes * CM/L No. 2710849 * Conductor Type Copper Copper Cable Size in square mm/Rated Current in Amp at 60% duty cycle/Conductor type 70 sqmm/361 Amp/Cu 70 sqmm/361 Amp/Cu Size of Cable in sqmm/Min Weight/Meter of Conductor 70 sqmm/190.56gram/Cu 70 sqmm/190.56gram/Cu CONSTRUCTIONAL Outer Covering General purpose HOFR * Current Capacity is at 60% Yes * Duty Cycle at ambient temperature (Degree) 30 degree centigrade * 1/3 Marking as per IS Yes * CERTIFICATIONS Availibility of type test Report Yes * Test Report number and Date Spec/011548 dt. 04/08/2015 * Name and Address of Laboratory Spectro lab, new delhi * Test Report to shown to Buyer as and when required Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Damor Jethabhai 389160, Office of Deputy Chief Material Manager, Freeland Gunj, Dahod 700 15
Portable Gas Cutting Machine With Accessories ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Standards Confirmity of Pressure Regulators used in Welding Cutting etc as per IS 6901 Latest Yes * confirmity of Blow pipe as per IS 7653 latest and BSEN 5172 latest Yes Yes BIS marked Cutting Torch true true, false If BIS marked Yes, Provide the CML Number otherwise put NA - * Performance Parameters Blow pipe shall have separate control knob for acetylene (Red Colour) and oxygen (Blue Colour). Yes * Supplied with Yes Yes, No 1/5 Oxygen Cylinder Capacity of Oxygen Cylinder(in Cu-m) if no choose NA 7 7, NA Acetylene cylinder Yes Yes, No Capacity of Acetylene Cylinder (in Cu-m)if provided otherwise put NA 6 6, NA Size of tip for Blow pipes in mm 6 2, 3, 6, 13, 20, 30 Fuel gas Acetylene * Cutting capability Straight Cut, Bevel Cut, Circle Cut all Straight Cut, Circle Cut all Cutting capacity (in millimeters) 75 Any applicable numeric value Cutting speed range (in mm per min) 0-200 0-200, 200-400, 400-600, 600-800, 800-1000 Max. Cutting width (in mm) 0-500 0-500, 500-1000, 1000-2000, 2000-3000 Material of Two Stage Oxygen Regulator and Two Stage Acetylene Regulator fully forged brass body confirming IS : 6901 : 1980 * Range of Pressure Adjustment of Oxygen Regulator (Kgf/Cm2) - * Range of Pressure Adjustment of Acetylene Regulator (in Kgf/Cm2) - * Hose pipe for Acetylene and Oxygen Yes * Electric supply of 230 V ±10% AC, single phase, 50 Hz ±3% through a 3- core wire Yes * Maximum Current (in amp) 2 Any applicable numeric value Warranty (in years) 1 1, 2, 4, 5 Class of Insulation H * Dimensional Parameters Hose Internal Diameter for Acetylene (in mm) 6 * Hose outside Diameter for Acetylene (in mm) 12 * 2/5 Length of Hose for Acetylene (in meters) 5 * Color of Hose Pipe for Acetylene Red * Hose Internal Diameter for Oxygen 6 * Hose outside Diameter for Oxygen 12 * Length of Hose for oxygen (in meters) 5 * Color of Hose Pipe for oxygen Blue * Dimensions of Machine (L x W x H) (in mm x mm x mm) - * Weight of Machine (in kg) 8 * Horizontal Adjustment of Torch (in mm) 135 * Vertical Adjustment of Torch (in mm) 55 * Specify the Length of Cut for Straight Cut in mm, Diameter range for Circle cut in mm and Angle for bevel Cut in degree whichever applicable - * Length of Power Cable with End Connectors (in meters) 10 * Additional Parameters Cylinder Content and Outlet Pressure gauge to be provided Yes * Non Return valve to be provided Yes * Trolley for cylinders Movement to be provided Yes * Adjustable spanner 10 inch to be provided Yes * Spindle key- 1no to be provided Yes * Spark lighter- 1 no to be provided Yes * Emergency on/off switch to be provided Yes * 3/5 Torch Cutting Angle (Must be in Range of 0 degree to 45degree) 45 * Length of aluminium track 1.8 * flash back arrestors confirming to IS to be provided Yes * Extra nozzel for torches:2Nos to be provided Yes * Circular cutting attachment to be provided Yes * Installation and Demonstration Yes * Machine shall be provided with all safety features to protect the operators from possible injuries Yes * Operating and Instruction manuals 2 sets Yes * Reports Availability of Type test report from Govt. Lab or any NABL/ILAC approved lab to prove conformity to the specification Yes * Test report number - * Date of test report - * Name and Complete address of laboratory - * Type Test report to be furnished to the buyer on demand at the time of supplies Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pankaj Shrawanji Waghmare 442401, Plot No.107/43, Chavan Colony, Theerthrup Nagar, Near WCL Quarter Chandrapur 1 15 4/5
welding cable Welding Cable ( 700 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Governing specification Conforming to IS:9857 latest * ISI Marked Yes * CM/L No. 2710849 * Conductor Type Copper Copper Cable Size in square mm/Rated Current in Amp at 60% duty cycle/Conductor type 70 sqmm/361 Amp/Cu 70 sqmm/361 Amp/Cu Size of Cable in sqmm/Min Weight/Meter of Conductor 70 sqmm/190.56gram/Cu 70 sqmm/190.56gram/Cu CONSTRUCTIONAL Outer Covering General purpose HOFR * Current Capacity is at 60% Yes * Duty Cycle at ambient temperature (Degree) 30 degree centigrade * 1/3 Marking as per IS Yes * CERTIFICATIONS Availibility of type test Report Yes * Test Report number and Date Spec/011548 dt. 04/08/2015 * Name and Address of Laboratory Spectro lab, new delhi * Test Report to shown to Buyer as and when required Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Damor Jethabhai 389160, Office of Deputy Chief Material Manager, Freeland Gunj, Dahod 700 15
Portable Gas Cutting Machine With Accessories ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Standards Confirmity of Pressure Regulators used in Welding Cutting etc as per IS 6901 Latest Yes * confirmity of Blow pipe as per IS 7653 latest and BSEN 5172 latest Yes Yes BIS marked Cutting Torch true true, false If BIS marked Yes, Provide the CML Number otherwise put NA - * Performance Parameters Blow pipe shall have separate control knob for acetylene (Red Colour) and oxygen (Blue Colour). Yes * Supplied with Yes Yes, No 1/5 Oxygen Cylinder Capacity of Oxygen Cylinder(in Cu-m) if no choose NA 7 7, NA Acetylene cylinder Yes Yes, No Capacity of Acetylene Cylinder (in Cu-m)if provided otherwise put NA 6 6, NA Size of tip for Blow pipes in mm 6 2, 3, 6, 13, 20, 30 Fuel gas Acetylene * Cutting capability Straight Cut, Bevel Cut, Circle Cut all Straight Cut, Circle Cut all Cutting capacity (in millimeters) 75 Any applicable numeric value Cutting speed range (in mm per min) 0-200 0-200, 200-400, 400-600, 600-800, 800-1000 Max. Cutting width (in mm) 0-500 0-500, 500-1000, 1000-2000, 2000-3000 Material of Two Stage Oxygen Regulator and Two Stage Acetylene Regulator fully forged brass body confirming IS : 6901 : 1980 * Range of Pressure Adjustment of Oxygen Regulator (Kgf/Cm2) - * Range of Pressure Adjustment of Acetylene Regulator (in Kgf/Cm2) - * Hose pipe for Acetylene and Oxygen Yes * Electric supply of 230 V ±10% AC, single phase, 50 Hz ±3% through a 3- core wire Yes * Maximum Current (in amp) 2 Any applicable numeric value Warranty (in years) 1 1, 2, 4, 5 Class of Insulation H * Dimensional Parameters Hose Internal Diameter for Acetylene (in mm) 6 * Hose outside Diameter for Acetylene (in mm) 12 * 2/5 Length of Hose for Acetylene (in meters) 5 * Color of Hose Pipe for Acetylene Red * Hose Internal Diameter for Oxygen 6 * Hose outside Diameter for Oxygen 12 * Length of Hose for oxygen (in meters) 5 * Color of Hose Pipe for oxygen Blue * Dimensions of Machine (L x W x H) (in mm x mm x mm) - * Weight of Machine (in kg) 8 * Horizontal Adjustment of Torch (in mm) 135 * Vertical Adjustment of Torch (in mm) 55 * Specify the Length of Cut for Straight Cut in mm, Diameter range for Circle cut in mm and Angle for bevel Cut in degree whichever applicable - * Length of Power Cable with End Connectors (in meters) 10 * Additional Parameters Cylinder Content and Outlet Pressure gauge to be provided Yes * Non Return valve to be provided Yes * Trolley for cylinders Movement to be provided Yes * Adjustable spanner 10 inch to be provided Yes * Spindle key- 1no to be provided Yes * Spark lighter- 1 no to be provided Yes * Emergency on/off switch to be provided Yes * 3/5 Torch Cutting Angle (Must be in Range of 0 degree to 45degree) 45 * Length of aluminium track 1.8 * flash back arrestors confirming to IS to be provided Yes * Extra nozzel for torches:2Nos to be provided Yes * Circular cutting attachment to be provided Yes * Installation and Demonstration Yes * Machine shall be provided with all safety features to protect the operators from possible injuries Yes * Operating and Instruction manuals 2 sets Yes * Reports Availability of Type test report from Govt. Lab or any NABL/ILAC approved lab to prove conformity to the specification Yes * Test report number - * Date of test report - * Name and Complete address of laboratory - * Type Test report to be furnished to the buyer on demand at the time of supplies Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pankaj Shrawanji Waghmare 442401, Plot No.107/43, Chavan Colony, Theerthrup Nagar, Near WCL Quarter Chandrapur 1 15 4/5
2 more tenders are hidden. Create a free account to unlock the full tender history, filters, and exports.
This profile is built from what portals disclose publicly. Since several states never release bidder lists or quoted prices, it likely understates the company’s true footprint. A tender is counted as won when the company either received the award or stood L1 at financial bid opening, even if the formal award is still pending. TenderKart compiles these public records independently and has no association with any government portal, buyer, or bidder.
