Loading
Loading…
Loading…
12,529 results • Latest
Digital Insulation Tester with 1) volta [ Digital Insulation Tester with 1) voltage variable up to 1 KV (that is 50V, 100V, 250V, 500V and 1000V), 2) insulation measuring range 0.01 M Ohm to 2 G Ohm 3) Accuracy: +/- 5% 4)Resolution : 0.01 Mega Ohm. 5) Maximum Operating Temperature : 60 degree Celsius 6) Operating Humidity (RH) - 90% at 40 Degree centigrade 7) Low Resistances Measurement: 0.01Ohm to 99.9Ohms 8) Voltage measurement up 600V, AC/DC 9) Live Circuit Detection : >25V with following accessories a)Test leads of 1 m length with crocodile clip-2 nos. b). External mains adapter (230V AC/9V DC, 500mA (4.5VA) isolated). c).Fuse 500mA/440V, 10KA and similar to Rishab Model.No. Insu 20. Makes: Rishab, Motwane, Megger (or) Fluke. Note: To be Procured from OEM/Authorized Dealers with Tender Specific Authorization certificate]
Terminal box cover suitable for MCP, OCB [Terminal box cover suitable for MCP, OCB motors of M/s. BBL make as per Drg. No. C/ELS/LGD/AUX/3/82 or latest if any for 3- phase locos. Note: One sample should be got approved before effecting bulk supply.]
High pressure hose pipe ID- 25.4 MM, OD- [High pressure hose pipe ID- 25.4 MM, OD- 35.8 MM, SAE-100R1, Length- 15 meter with both ends female swivel 1 inch BSP fitting with adopter. (1 inch R1X15 MTR STXST BSP FITTING 88 BAR 110 degree Celcius).]
Thermal conductive silicon grease (Heat [Thermal conductive silicon grease (Heat sink compound) of M/s. ANABOND make, model no. 652C OR DOW CORNING make DC 340 only. Note: 1) Each tube contains of 50 Grams. 2) One sample should be got approved before effecting bulk supply.3) Shelf life must be atleast one year from the date of acceptance of the material.]
Empanelment of Consultants for Preparation of Drawings Estimates Including RCC Designs Obtaining Technical and Administrative Approvals and Technical Supervision of Development Works under Various Government Schemes
Set of Door Latch Assembly for SB & HB d [Set of Door Latch Assembly for SB & HB doors of Three Phase Locomotives as per Ref.No.1 to 7 of ELS/LGD Drg. No. C/ELS/LGD/B.F/3/42. One set consisting of (1) Base Plate as per IS:6603.Ref.No.1. -01 No./Set. (2) Lock Plate as per IS: 6603 Ref.No.2.- 01 No./Set. (3) Support Plate as per IS: 6603 Ref.No.3.- 01 No./Set. (4) Fixing Screw as per IS: 1364/1367 Ref.No.4.- 04 Nos./Set. (5) Flat Washer as per IS: 2016 Ref.No.5.- 04 Nos./Set. (6) Spring washer as per IS: 3063 Ref.No.6.-04 Nos./Set. (7) Hex Nut as per IS: 1364/1367 Ref.No.7.- 04 Nos./Set.]
Self-bonding (Amalgamating) insulating t [Self-bonding (Amalgamating) insulating tape, size: 38 mm width x 0.7 mm thick x 4.5 meters roll for cable head termination system of Loco /EMU as per RDSO Specn. No/ELRS/SPEC/BL/0003 (Rev-1) and amend 1. Dec -2008. RESERVED FOR CLW APPROVED SOURCES]