Fabrication Tenders in Jharkhand

Shifting of weighbridge platform, fabrication of weighbridge control room with platform foundation structure, ramp work and erection of 440V OH line for supplying of power to weighbridge for both end weighment arrangement near Kargali Siding under

Repairing of track tensioners, reconditioning of track rollers, carrier rollers and track guards fabrication and fitment for maintaining proper track alignment and safe operation of IDM-30 Drill Sl. No. 202206980 of GVP Ph-II OCP.

1.Blade old plate cutting by gas. 2.New plate welding by steel electrode. 3. Blade cutting edge new welding by steel electrode.

1- Propeller Shaft Complete Dismantling/removing fitting. 2- Propeller Shaft teeth cutting and welding, fitting. 3- Propeller Shaft Yoke cutting, welding and Fitting.

1.Cabin Floor Cutting Necessary Damage/rushed Sheet Changing, Welding Repairing. 2.Both Side Footrest Cutting, Welding, Repairing Necessary Damage/rusted Sheet Changing.

Reconstruction of power supply line in Teachers colony providing power supply with metering panel to 124 Nos quarter including dismantling of overhead line in teachers colony and buyback of conductor MS structure recovered from overhead line in Te

Changing of undercarriage, track roller 8 Nos. roller guard 3Nos. roller seat making 32 Nos.crack chassis welding 6 nosbroken bolts removing 10 nos 1Noroller assyand rep. of engine, pump cover guard and foundation base of Shovel No.G-10231 atDBOCP

1. Worn out holes rebuilding and grinding as per pin size. 2. New making of pin and fitting. 3. Repairing welding of broken cylinder bracket both side welding by steel electrode. 4. Repairing of flange welding and fitting.

1. Boom cracked portion gousing V making. 2. Cracked portion boom welding by steel electrode. 3. Ribs cutting bending and welding. 4. Arm both side cracked portion gousing. 5. Arm cracked portion both side welding by steel electrode.

1. Stay cylinder broken both side gousing. 2. Stay cylinder alignment and welding by steel electrodes. 3. Ribs cutting and welding. 4. Eye frame worn out portion straightening by hyd. Jack. 5. Cracked portion welding by steel electrodes.

1. Cracked portion of chassis both side gousing. 2. Cracked portion chassis both side welding by steel electrode. 3. New plate cutting from grounded m/c. 4. Plate welding by steel electrode. 5. Radiator mounting cracked portion welding.

1.Dismantling of water pump assly and hyd. Pump assly and cleaning. 2.Water pump housing welding and machining. 3.Shaft welding, machining, polishing and straightening. 4.02 nos pulley shaft bore machining. 5.Hydraulic pump assembly body welding

Custom Bid for Services - Fabrication of Racks Pumps Stand with overhead chain pulley arrangement and trolley for Artificial Lift Base at Well Site Similar Category Operation And Maintenance Of Gas Compressor Station Repair, Maintenance and Installation of Plant Systems/Equipments

Fabrication of 3km 800/1000mm Conveyor Structure

33 KV and 11 KV Fabrication Materials

fabrication (Casting and machining) of 02 nos. Motor housing rear and cover (dala) and 02 nos. bearing cap (front 1 and rear 1) of 160 KW Motor at Sendra Bansjora Workshop, Loyabad. (Mechanical Repairing of Induction Motor)

Repairing and reconditioning of A frame by taking out pin and metal deposition cutting, welding grinding as per size of pin and its backfitment in dumper TH-8 under Ashoka OCP. Repairing to be carried at site OR in situ.

Repairing of dozer left side track chain cutting opening refitting pin machining sprocket segment old bolt cutting by gas 27 nos segment hole repairing welding grinding bolt fixing 27 nos segment fitting and bolt tightening of dozer T13593 of Bokaro

Two numbers steering cylinder reconditioning work by both end eye repairing and piston rod threading with locknut and gland repairing as per size by welding, grinding.Straightening of tie rod, eye making as per bush size backfitment of TH-12 of AOCP

Repairing of 50 MT Make Orion Weighbridge including welding of broken MS platform plates, fixing of 03 nos. deformed I section beams and replacement of two nos. beams including replacement of damaged parts and strengthening of weak joints under Chu

Repairing of power take off assembly and its backfitment in TH-12. Repairing of wheel hub drum (02 Nos.) differential support side hydraulic compensator, gate lock, slider block by cutting, welding, grinding and its backfitment in TH-14 at Ashok OCP

For repairing of RHS final drive cap bolt taken out done and new thread making and hyd. pump main tube welding and setting and both side engine side plate new making of Dozer Sl.No. 11536 at AKWMOCP, Katras Area, BCCL

1 Repairing Rewinding of 02 Nos 3 KW motor assembly of EKG 5A Shovel Sl.No Exc 2859, and ii Repairing and Reconditioning of 22.5 KVA welding machine, volt 415 2 Phase Machine Sl. No Exc 1844 Shovel at Kathara Colliery.

Connecting of 12in dia pipe from 1st clear water tank to 2nd clear water tank JWTP and dismantling of 12in dia pipe, transporting and jointing trench cutting making bend , reducer , air valve , flange welding 12in dia / 10in dia at JWTP

PANCHI TOOLS Blacksmith Tool Kit (YSSY UP GOVT) Blacksmith forge, PANCHI TOOLS Blacksmith Tool Kit (YSSY UP GOVT) Blacksmith forge blower, Aari (cutting saw), Basula (Adze),Nihahi (Anvil), Hammer,Chisel,Hand Drill machine,Hexa frame,hexa blade, ... portable welding machine

Renovation of damaged radiator and rep. of radiator and oil cooler fan motor and rep. of motor fan housing, catwalk platform making and complete repairing making of mast resting platform with fitting and welding for IDM-30 Drill, Sl. No.- 775

Repairing backfitment of radiator asyy and its foundation, radiator grill, fan pulley system, etc of CAT777D TH10 and Repairing of cracked chassis and support, by grinding, welding, cutting and rewelding and checking for crakes,etc of CAT 777D TH-13

(1) (A) REPAIRING OF MINE LINE STAR DELTA STARTER 150 H.P,550 VOLT,SL.NO.107/SD,AT FILTER PLANT.(B) PART REPAIRING OF INDRAK MAKE WELDING MACHINE DOUBLE SET.440 VOLT SL.NO.AKWMC 01 AND 02 AT AKWMC,KATRAS AREA.(2)COMPLETE

Repairing of track chain assembly by removal and fitment old and serviceable track chain links and repairing of tunion cap and repairing/welding of tilt guard rear sprocket end of BD355 Dozer Sl.no. 11835 of Kuya OCP, Bastacolla Area IX

Clubbed work (1) cutting, replacing, welding of 2 no. damaged rail track section of Reclaimer-I (1701) on west side providing and fixing of dog coupling and its rubber element of sprinkler pump and (2) demounting, dismantling, repairing, re-assemblin

(1) COMPLETE REWINDING/REPAIRING OF 45 KVA HT TRANSFORMER 6.6KV/220 VOLT SL.NO.2025,3 PHASE OF AKWMC,OCP UNDER KATRAS AREA-IV.(2) COMPLETE REWINDING and REPAIRING OF 32 KVA,550 VOLT WELDING TRANSFORMER MAKE-INDARK AT ASKCC UNDER KATRAS AREA

Repairing of broken bracket, pin and eye holes of tilt cylinder and LH side budge portion of idler cutting, drinding and welding and repairing of exhaust system and bucket lift cylinder assembly (LH) of BD-155 Dozer deployed at Kathara washery

Repairing of dozer right side track chain cutting opening refitting pin machining sprocket segment old bolt cutting by gas 27 nos segment hole repairing welding grinding bolt fixing 27 nos segment fitting and bolt tightening of dozer T13593 of Bokaro

Repairing of front right leveling jack seal kit changing and jack pad plate welding at broken places, jack pad ball joint material filling,new cover plate making, repairing of compressor AC element housing and weldment of its mounting OF DRILL 1406

Removed of damaged and worn out 172 nos of picks with holder and fixing of new picks with holder by cutting and welding by suitable electrodes for crusher roll of feeder breaker No2 and 3 of Muraidih Colliery under Barora Area

Repairing and reconditioning of main control panel of Machine Shop (Panel 1 and 2) for controlling power of EOT Crane, Lathe Machine and repairing of Heating Chamber panel and rearrange power for Welding Generator of Electrical Shop at Regional Repai

Rep. of both side brake assembly, brake booster, replacement of brake shoe, with complete fitment. Removal and fitment of cabin and diesel tank and cabin mounting with welding and grinding with complete fitment work of Dozer BD155 Sl. No. 13781.

Dismantling, cutting, welding and laying of 6 inch dia G.I. Pipeline required for repair of the existing 6 inch delivery pipeline supplying water to the Fixed type Water Sprinkler Tank, installed along the road of Kargali Washery Railway Siding, w.r.

Reconditioning and repairing of broken frame, walkways, air cleaner housing, Fan pulley system, Bumper frame, Foot steps, fire extinguisher stand, battery box and Transmission cover by cutting and welding in 05 nos. 28 KL water sprinkler ( WT-3, WT-4

(A) Repairing overhauling of old DST 1000 GPM, 150/200 installed at river side pump house with replacement of worn out internal parts and welding grinding, machining of upper lower casing with monor base plate repairing as per required under Kathara

Work of Repairing of both side brake assembly, brake booster, replacement of brake shoe, with complete fitment. Removal and fitment of cabin and diesel tank and cabin mounting with welding and grinding with complete fitment work of Dozer BD-155 13783

Repairing, Denting, Straightening and Welding of complete machine housing, railing guard, platform and ladder, Radiator and Cooler guard, Repairing of operator cabin and seat and back rest of CK-300(D) L-T Shovel, Sl. No.-722 of AMP colliery.

Transporting laying of 100mm dia MS pipe 850m length from Ganeshpur Jangli Baba point to Phularitand phatak up to Dhaskapoti,Mohlipoti, Vhata and main road side with cutting of trench cutting of pipe and welding pipe etc under Phularitand Colliery.

For repairing of Crowd Pully platform and railing guard its base and repairing top portion boom pully platform its base and repairing of boom plateform and railing guard new making fitting welding of Shovel Sl.No.524 at AKWMOCP ,KATRAS AREA, BCCL.

Repairing and servicing of radiator and repairing of DG Generator crank pulley worn out bore welding and new seal fitting in service van JH10AV-5177 and repairing of self starter and alternator of Diesel bowser JH10AP 0938 at Tetulmari OCP

New making of ladder and fixing by welding of Dumper Sl. No.D-60385, D-60386, D-60387, D-60388, D-60392, D-60776, D-60778, D-60786,D-60946, D-60950, WS-28288 and WS-28005 of GVP Ph-II OCP.

Repairing of sprocket assy. eye hole and cutting welding of sprocket guard, blade arm, AC element housing , Repairing of engine, transmission guard, both side trunnion and caps, replacement of cutting edges and end bits and UJ assy. of Dozer 13628

Changing of upper and lower (both side) damaged radius arm eye housing and new bushing fitting, and welding of broken mounting eye and repairing of output shaft of Dumper assembly opening, drive line opening and Dumper assembly dismantling of 10292

TWO NOS OF 150 H.P. PUMP MOTOR SET INSTALLATION AT 02 NOS INCLINE U/G 33 LEVEL DIP AFTER ONE 150 H.P. PUMP MOTOR BRINGING FROM SURFACE AND ONE FROM UPPER SIDE COMPLETE WITH ELECTRICAL AND MACHINCAL ALSO ONE WELDING MACHINE

(a). Repairing of cracked and bended portion of chassis and platform and (b). Repairing of mast rest assembly, Air cleaner housings, railings and welding of 04 nos. jack pads of REL 650 drill machine Sl. no. 2109 of Jharkhand OCP.