Fabrication Tenders in Jharkhand

Replacement , repairing of worn out intermediate frame and deck plates, installation and erection of idler frame with rollers, return rollers, fabrication and erection of same at 1301 belt conveyor drive side of PS-9 section at Madhuban Coal

(A) Repairing of sprocket drum assembly and replacement of floating seal, TC gasket and transmission seal and (B) Repairing/ fabrication of battery box of Dozer Sl. No. T-11654, CIL No. 3419, Model BD-355 at Kathara Colliery.

Fabrication/erection of hood/protective cover of ROM B/C, Picking B/C, reversible B/C and replacement and repairing of skirt rubber frame of Bypass B/C and Traverse B/C in PCH Section at Sawang Washery.

Repairing and re-fabrication of long bed lathe machine Sl no- 02 with replacement of components under gone wear and tear of Extension feed, cross slider system and gear box etc of Machine Shop under RRS (NK) Dakra

Fabrication of sheds for 01 no. 1000GPM pump motor and repairing of damaged sheds of pump 02 nos 500GPM shed, operation shed in main sump and operation shed of middle sump set in respect of AKKOCP, BnK Area

Fabrication and erection of straight launder along with its supporting structure channel, angle plate etc. after dismantling the existing old and damaged straight launder along with its supporting structure of Thickener no. 01 in section-I at Kathara

Repairing of UJ Cross, fabrication and fixing of transmission guard, transmission mounting, bracket, cabin mat, steel tube, two no of tooth point of bucket and also cleaning of new transmission fitment area of L7 Payloader of Ashok OCP

Repairing of damaged operator cabin door and cabin right side fabrication of aluminum glass frame and new glass fitting and repairing of operator seat and back rest of CK-300 Shovel B734 at Nichitpur OCP of Sijua Area.

Repairing of worn out Gear, Shipper Shaft, Intermediate in float and Fabrication of Washer Thrust and Bushing Oilite in float and Dowel, Brass 0.75 x 1.5in float of 182 M Marion Shovel, Sl. No.- 221 of AMP colliery.

Dismantling of damaged iron materials of chute and door drum 1st and 2nd and bunker platform along with door drum base supporting materials and repairing the same by fabrication of old iron materials at Feeder Breaker AMP Colliery

Making /fabrication and providing spares for day to day running maintenance and rectification works of pumps along with associated motors suction and delivery of the following 1000/2000 GPM Pumps installed at 3P quarry in r/o SDOCM

Repairing of Boom Foot Pin Assembly - A) Repairing of worn out Boom Foot Pin. B) Repairing of worn out Boom Foot Pin Eyes. C) Fabrication of Bushing Steel of 182M Marion Shovel, Sl. No.- 221 of AMP Colliery.

Dismantling of rusted and damged 10in dia pipe and repairing of flange, winding and fabrication of nipple, taper bend and re-jointing of 10in dia pipe at discharge point BoxCut-III of ABOCP Mine under Block-II Area

Fabrication of suction pipes (short piece) of different sizes for pumps dia 350 to 300 mm ,250 mm dia 200 mm dismantling overhauling refitting of suction valve of different sizes for suction under Pump Section of Rajrappa Washery

Replacement, repairing of damaged intermediate frame and deck plates. installation and erection of idler frame with rollers, return rollers, fabrication and erection of same at near overhead road side Baghmara at unit no. 301 belt conveyor of Madhuba

Different types of work i.e.2000GPM and 4000GPM shaft coupling bore machining, Keyway making, cutting and making of coupling boss, fabrication of coupling pin etc. and repairing of 02nos. of front idler of SDL of Phularitand, AMP Colliery.

Oval eye repairing of 02 nos. rear suspension, seal replacement, pin fabrication and backfitment of both suspension, dismantling, repairing and backfitment of engine exhaust leakage arrest,PTO spline male and female,etc of CAT777 Dumper TH8 at AOCP

Repairing /fabrication of platform, railing guard, machine housing side wall, housing door, housing bottom side, hydraulic pipe cover straightening, fitting and new safety glass fitting of BE-1000 Hyd. Shovel Sl. No. 10277 at ASBN OCP, Sijua Area.

A) Repairing, reconditioning and attaching of 4.4 KW, air cooled engine-prime mover with alternator set, including base frame fabrication and painting B) Repairing and reconditioning of 04 cylinder Kirloskar Make Model 77.3 KW, 105HP, 1500 RPM, Prime

Rep. and overhauling of one (01) No. radiator, one (01) No. TC oil cooler and complete fabrication of three (03) Nos. of front, middle and rear tilt guard of BD355 Dozer Sl. No. G11389 at BOCP, Sijua Area.

Repairing of damaged canopy, repairing of transmission guard, 02 Nos. steel tubes, repairing of silencer assy. and transmission line delivery tube, fabrication of engine stand and repairing of propeller shaft of 60 Ton BEML Dumper, Sl. No. - 60432

Repairing of Arm crack portion and Bucket eye bushing housing, Arm end bushing housing by welding and machining by Line boring , providing the bushing (PB alloy) and fitting to the m/c Tata 1200 Hyd. Shovel Sl. no. 70 of ABOCP of Block-II Area

Repairing of ladder assemblies And fitment in machines EKG 5A Shovel sl. No. 589 and 487 of Dakra Project

Repairing of broken hydraulic tank mounting bracket, drive shaft and propeller shaft, front drive shaft guard, silencer, butterfly and fabrication of new Engine Guard and transmission guard, glass fitment in Dumper slno 90029 of KDH OCP, NK Area.

Fabrication of 05 (five nos of road barrier, fixing an jamming it at different roads leading to nearby village / basties for preventing the large vehicles (Truck/Dumpers) to pass through this way preventing the unauthorized transportation of coal und

1. New making of crowd gear cover. 2. New plate cutting, bending and welding. 3. New angle cutting, setting and welding. 4. New holes drilling as per size. 5. Collar shape cutting and welding by steel electrodes. 6. Shape making as per size.

Impeller 02 nos. eye bore welding/machining of HT pump (b) Repairing of neck ring outer inner welding/machining of HT pumps (Neck ring bush and distance pieces) for 02 nos (C) Impeller shaft bearing size and thread welding of RJML OCP

1. Repairing of crowd gear cover. 2. New plate cutting, bending and welding. 3. New angle cutting setting and welding. 4. New holes drilling as per size. 5. Collar shape cutting and welding by steel electrode. 6. Shape making as per size.

1. Repairing of crowd gear cover. 2. New plate cutting, bending and welding. 3. New angle cutting setting and welding. 4. New holes drilling as per size. 5. Collar shape cutting and welding by steel electrode. 6. Shape making as per size.

1. Front damage plate cutting 2. New plate welding in place of damage plate by steel and low Hyd. Electrode. 3. Front ribs now plate bending, shaping and welding 4. Blade back damage portion cutting and new plate welding by steel electrode.

1. Oval pin hole of feed chain sprocket and motor drive sprocket welding by suitable electrode. 2. After welding the hole machining as per pin size.

1. Oval pin hole of feed chain sprocket and motor drive sprocket welding by suitable electrode. 2. After welding the hole machining as per pin size.

1. Both side of damage mud guard cutting and straightening and welding. 2. Head light mounting space repairing and straightening. 3. Ladder straightening welding and repairing.

Repairing of arm housing damage broken cutting and opening complete od 248 , L600 new housing fitting, complete welding with supporting plate and boom housing cutting from s/off mc and made as per size also making bore on lathe and fitting with bush

Dismantling and recovery of 10inch dia and 8inch dia partially damaged MS pipe from different places of mine premises and transporting to SOCP Kali Mandir premises for repairing and making of fresh pipe through cutting and welding to keep ready the p

Repairing of base plate and its alignment work for installation of new Motor at intake riverside pump-house and providing/Making and fixing of 12 No. New Coupling guard by cutting, Bending, Punching and welding of M.S. Sheet for various Pump-Motor

Cutting and welding of 6 inch and 8 inch dia G.I. pipes to make Short Pieces and Reducers required for changing the location of pumps as and when required in the Coal Face of D.D. Mines, w.r.t. Bokaro Colliery, under BnK Area.

Repairing of LHS propel gear box driving sprocket, shaft and bush repairing, welding and GM bush new fitting, machining of rotary gear box slide plate and gear box alignment of IDM 30 drill Sl. No. 826 at AKK OCP (Excv) under BnK Area.

Repairing of 04 Nos.(A) repairing of 500KVA distribution Transformer, Volt-3.3KV 440V at Teachers colony, (B) Repairing and rewinding of air cooled welding machine, 3 ph, 440V at base work shop OCP Mines (C) Repairing of 3.3KV 400 Amps VCB Switch ma

Work of 8 inch dia pipeline incl. laying,cutting,Transporting and welding around periphery of Coal Stock No.07 of 300m length and extn. and branching of pipeline at Coal Stock No.03 of around 90m length for firefighting purpose under Purnadih Project

Repairing Straightening Welding Clamping and Re-storation of 220-V and 550V OH Line Pipe Pole and Rail Pole Damaged from Base Portion P.C.C Work to avoid safety threat in the location of Domestic line Dumariya Tand and Bagdigi Basti of Jealgora Su

Work of Dismantling, Laying, welding of 570 mtrs. 4 inch, 6 inch and 8 inch dia. Pipeline for extension of delivery side from filling point to coal stock 37 at dewalgadda for the purpose of dust suppression under Magadh OCP, M-S Area

Dismantling 8 inch diameter pipeline from soil along track of 1016 and 1017 and repairing, welding and fitting with all fittings (like valve, tee, bend, sprocket and rain gun), and placing the pipeline 2 feet above the ground for dust suppression and

Repairing Straighthening Welding Clamping and Re-Storation Overhead for 11 KV Pipe Pole and damaged Rail pole for base portion different location of incoming line D.G.-I and D.G.-II line of Lodna Power House and R.C.C. work to avoid for Safety Thr

Repairing of Mounting base of Cutting Edge, end bit, sprocket assy of eye hole and cutting welding of sprocket guard, Blade Arm, AC Element Housing and both side (LH and RH) lift cylinder assly of Dozer D155 sl.no.T-2669 of Gidi Washery.

Repairing straightening welding clamping and re-storation of overhead for 11 KV Pipe pole and rail pole damaged in base portion at different location of incoming line of 06 No.sub-station to Golden sub-station and PCC Work to avoid hazards of Amal.NT

Scratching Cleaning and Painting of 11 KV 3.3 KV input and output Switch(12 Nos. Make Prayag Electrical Pvt.Ltd.) of Lodna Power House Local Id.No.- 1 to 12 and welding Straightaining and Lock Fitting etc. of Lodna Power House under Lodna Area.

A) Complete repairing and overhauling of HMB make LB25 model semi-automatic Lathe machine B) Repairing of Welding Generator 26.5KW, 3ph, 50HZ, 1500 RPM, C) Repair Maintenance of two (02) no Window Type and Two (02) no Split Type Air Conditioner insta

Following repairing is to be done in Drill Sl. no. RECP-714- (1)Broken and cracked chassis resetting by hydraulic jack pressure and fixture by V groove cutting by both side 02 nos. and plate reinforcement and operator cabin foundation welding and tra

Repairing of Operator cabin glasses, seat, floor mat, lock, DC2000 door, transfer panel and MG start panel rubber bit, Cabin right side wall with roof denting and welding and Roof Tar-felting of 182M Marion Shovel, Sl. No.- 221 of AMP colliery.