Fabrication Tenders in Jharkhand

Repairing of Operator cabin glasses, seat, floor mat, lock, DC2000 door, transfer panel and MG start panel rubber bit, Cabin right side wall with roof denting and welding and Roof Tar-felting of 182M Marion Shovel, Sl. No.- 221 of AMP colliery.

A)Full overhaul and repair of the HMB LB25 model semiautomatic lathe machine located at the EM workshop B Reconditioning of the 265KW 3phase 50Hz 1500 RPM 400A440V Type KE Welding Generator Kirloskar MC No 810201 86 of JOCP under Hazaribagh Area

Removal and fitment of H-Frame assembly with mounting base repair, undercarriage repair and cutting of Tooth point adapter 06 nos, and fitting of new adopter 06 nos. by gauzing and welding of CK-300E Shovel Sl.no.E-164 of Gidi-C Colliery.

Dismantling, cutting welding and laying of 8 inch dia G.I. Pipeline required for repair of the existing 8 delivery pipeline of the 2000 G.P.M. Pump Motor Set, supplying water to the reservoir tank being used for the Water Sprinkler in the Haul Road

Repairing of damaged LHSnRHS arm assembly(along with brace arm)and RHS chasis welding, repairing/overhauling of 04 nos. carrier roller assembly of both side of dozer-11648 And Rep. of hydraulic control valve LHnRH blade side shift cylinder of MG-3249

Flange welding Carrying laying and joining 6 inch dia M.S. pipe 250 Mtr( 42 Nos) from 4th 4000 GPM Pump delivery discharge point near 8 No. coal depot to Chhat Talab at Jeenagora section of Amal. NT-ST JG Colliery under Lodna Area.

Loading, carrying and unloading of the platform of the WB from Chiraiyatand to WB-1 and (2) Dismantling of the platform of WB-3Ask and (3) Installation of the platform after repairing work by cutting welding etc under Ashok OCP PPR Area.

Rep. of both side brake assembly, brake booster, replacement of brake shoe, with complete fitment and Removal and fitment of cabin and diesel tank and cabin mounting with welding and grinding with complete fitment work of Dozer BD-355 Sl. No. T-11902

Day to day shifting of Pumps with delivery and suction pipe as requirement and dismantling, laying and joining of 6 dia and 8 dia pipeline with accessories like flange welding, rubber insertion, bend, Sluice valve and NRV etc for dewatering of qua

Repairing of cracked L.H and R.H. track frame and diagonal frame and partial repairing of cracked R.H. Blade arm and trunion by gauging and welding of BD 155 Dozer 13608 and Partial repairing and reinforcement of blade assy. Of BD 155 Dozer 13723.

Repairing work of dipper handle, serviceable rack segment 02 Nos. replacement by cutting and welding, tie-rod assembly hole making by material fitting and bush fitting with providing lock and pin fitment of EKG-5A Shovel, Sl. No. - EXC-564 at AKK,

Dismantling, laying, pipe cutting, jointing (welding) etc of 6 inch dia, 8 inch dia and 10 inch dia pipeline for the shifting of pumps at Main Sump and Jehlitand Sump as and when required for one year under KDH OCP, NK Area

Repairing of rusted and damaged portion of tower leg by cutting stub welding and painting of tower structure, BMK, JB, Isolator gear box, CT junction box etc for safety of tower and other equipments side switchyard at 220/132 kV GSS, Adityapur-II.

(1) RERAIRING OF 02 NOS. 400AMPS OCB SWITCH MAKE-GEC, VOLT 550,SL.NO.314711/149 AND 30/0047 AT KESHALPUR SUB-STATION UNDER AKWMC, KATRAS AREA. (2) REPAIRING / OVERHAULING OF 6.6 KV/400 AMP H.T SWITCH SL.NO.SGI-8353 V.C.B AND WELDING/DENTING

Day to day shifting of 4 inch dia pipeline by dismantling, laying, cutting, jointing (welding) etc as per advancement of mine for firefighting at Jamun Dohar and repairing of existing pipeline as and when required for a period of one year under KDH

Dismantling loading carrying laying and joining of 6 inch dia M.S pipe 750 mtr. and New Pipe 780 mtr.loading on truck from N.S.Workshop store and unloading at Jeenagora work shop. Flange welding and joining at B - Patch NTC for water supply for Golde

Repairing of damaged platform of work deck group by cutting welding , new plate changing and fitting railing guard changing repairing and fitting and battery box repairing with new plate changing of 160D, DR 233 at DOCP Kusunda Area at DOCP Kusunda A

Complete Repairing of 11 KV 400 Amps.OCB Switch with Busbar Make Southern Gear Controlling of 300 KVA/11KV/440 Transformer for Lighting Purpose and welding Machine at Avinash Transport Camp Local Id. No.BCCL/NT/SW/11KV/61 of Amal.NT-ST-JG O.C.P.

Repairing Straighthening Welding Clamping and Re-Storation Overhead 11 KV Pipe Pole and damaged Rail Pole for base portion different location of incoming line D.G.-III of NT-ST-JG C and R.C.C. work to avoid for Safety Thread under work of Amal.NT-

Lowering of 100mm dia pipe inside 9 seam bore hole with cutting, welding, making short piece and connection etc complete inside incline 9 seam for supply of drinking water at Kastundoo, tundoo and chitahi dham and other village at Jogidih colliery un

Repairing of both side 54 numbers hole of boss sprocket and Repairing of damaged front and rear belly guard by gas cutting of plates, straightening by gas heating and hammering, cracked portion V groove cutting and welding of D155 Dozer Sl NO 1

For repairing of rotary head housing gear (LHS and RHS) , straightening of bend chain roller links (LHS and RHS) and cutting welding machining of Pins ( 02 Nos.) of pulldown cylinder of Drill (REL-512) Sl. No. DR-245 at AKWMOCP, KATRAS AREA, BCCL

Repairing of 02 nos. driving wheel of EKG Shovel as float and back wall, side wall and roof mounting angle and channel opening, cutting, denting, reshaping welding and fitting with nut bolt and washer for EKG Shovel HMB 542 at DOCP Kusunda Area

Repairing/rewinding of welding machine 440/220 volt, 400 amp /22 KVA air cooled 02 nos. for Field Equipment and complete repairing of magnetic amplifier unit with primary winding of hoist circuit of EKG 5A Shovel SI No. HMB485 CIL No. EXC2434.

Repairing of HEMM Model-WS-28-2Water sprinkler, CIL No.WS-173, Sl. No.WT-301 of Jarangdih Colliery. (A) Repairing of damaged engine guard and transmission guard. (B) Repairing of rear (RHS) 2 nos. damaged arm radius eye housing by welding and grindin

Repairing of HEMM M/c. No.BH60M Dumper, Sl. No.D-60388 of Jarangdih OCP. (A) Repairing of damage arm radius eye housing by welding and grinding new bush pressing and pin repair. (B) Repairing of rear drive shaft assembly, cross changing and guard rep

Repairing of LV Ring Collector Assy. in float, Welding Machine MCCB Box fitting, H.T. insulator panel and LBS mechanism and New Supply and Fitting of Power Monitor Device for protection of all blowers of EKG Shovel, Sl. No.- HMB541 of AMP colliery.

Lead Jointing, Cutting and welding of SF and damaged pipes and NRV and clearing of jungle at Harina Boostiing station, conceret work at JWTP pump house, construction of chamber and other miscellaneous work at NNTS near culvert in front of barber shop

Repairing Straightaininig Welding Clamping and Re-Storation Overhead 440 Volts Line Pipe Pole and damaged Rail Pole for Base Portion different Location of near 2 No. Staff Quarter and 16 No. Staff Quarter Area etc. and R.C.C Work to avoid for Safet

Repairing of cracked mast, both arm link of undercarriage, oval eye hole re-developing and new bush fitting, straightening of bent track frame and welding, rep. of complete PTO gearbox assembly of RECP Drill Sl. No. 817 at Bansdeopur OCP, Sijua Area.

A) Repairing and overhauling of new DST 1000 GPM Pump, 150/200 installed at river side pump house with replacement of worn-out internal parts and welding, grinding and machining of upper-lower casing with minor base plate repairing as per required an

Changing of 140 No Galvanized Corrogated Sheet of High Tension Room Transformer Room Trooley Challah and Errection of Weldinding Machine Room On Setter Shed etc.1. HT Room-70Pcs 2. Transformer Room-20Pcs, 3. Welding Room -35 Pc, 4. CISF Guard Room-1

Repairing of LHS and RHS brake drum replacement from serviceable assly, removing blade stabilizer rod broken bolt material filling and fitting new bolt 4 nos. as per size with welding supporting plate of Dozer Sl. No. T-11971 of Konar Expansion, BnK.

Repairing and replacement of under carriage , repairing/ rebuilding of worn out and broken lower portion of blade for fitting cutting edges and end bits and extra plate welding on blade and denting and painting of Dozer model- BD- 355, Sl. No.G-115

Dismantling of damaged 10inch dia and 8inch dia idle MS pipe line from 3rd patch and transporting to Kali Mandir premises for repairing through cutting and welding of damaged flange and keep ready the pipes for further erection of pipe range at Murai

((1) DISMANTLING AND ERECTION OF 440 VOLT OVER HEAD LINE LIGHTING LINE NEAR BHUMI MINES DEPARTMENTAL HAUL ROAD AT AKWMC,OCP UNDER KATRAS AREA.(2) ERECTION OF 440 VOLT OVER HAED LINE FOR WELDING ARRANGMENT AT OCP SITE IN AMPL SECTION OF AKWMC.

Rep. of cracked boom mounting by welding, plate fitting, pin hole making, rep. of 01 (One) No. 24Volts alternator and 24 Volts self-starter (Lucas make) of TIL crane RT-740 Sl. No. 407965 Reg. No. JH10AS 2697 at TOCP, Sijua Area.

Repairing of Front Spindle of BEML make BH60 M Dumper Sl. No. D-60407 and Repairing of Mount Base of cutting Edge and end bit and repairing Sprocket Assly Eye Hole and cutting / welding Sprocket Guard of Dozer T-13617 of Sirka Project.

Dismantling and fitting of track chain, replacing 02 nos. track pad and guard broken bolt taking out and straightening the track guard dozer 11902 and Damaged guard welding and 08 nos of link cutting, machining and fitting in machine of Dozer 11971

Dismantling laying pipe cutting jointing (Welding) etc of 6 Inch-300 mtr 8 Inch dia-200 mtr 4 Inch- 150 Mtr. Pipeline for shifting of pumps at Main sump firefighting locations and others as and whenever required Under TTK OCP Rajhara Area

Repairing/ rewinding of (i) 3KW Motor, Volt-415, 3 Phase (ii) 1.1KW blower motor (04 nos) and (iii) 112.5KVA auxiliary transformer of 182 Marion Shovel Sl. No. Exc-1851 and part repairing/ rewinding 25KVA welding machine of EKG 5A Shovel Sl. No. Exc-

Repairing of work bell arm housing and bush fitting, stick end housing repairing by line boring and bush fitting, rack segment and 10 nos. teeth repairing and hoist pinion shaft teeth repairing welding and grinding for EKG Shovel S542 at DOCP Kusunda

Making of protective boundary along a portion of the pipeline of the Pump, in operation at siding, supplying water to the reservoir, by cutting, welding of departmental Rail Pole and work of Channel, Angle Iron, at Kargali siding PF II under Karo OCP

A) Rep /new making of LHS and RHS track chain guard both side B) For extracting old LHS track chain link , pin cutting , opening fitting and carrier roller foundation and broken bolt removal and LHS equalizer seat welding of Dozer Sl.No.11670

Making of protective boundary along a portion of the delivery pipeline of the 2000 G.P.M. Pump, in operation in Mine, supplying water to the Village Pond, by cutting, welding of departmental Rail Pole and work of Channel, Angle Iron, under Karo OCP

Repairing Straighthening Welding Clamping and Re-Storation Overhead 11 KV Pipe Pole and damaged rail pole for base portion different location of incoming line D.G.-1 and 2 line of Lodna Power House and R.C.C. work to avoid for Safety Thread unde

Repairing of crusher roll along with cutting and welding of picks with Holder,dismantling and fitting of crusher drum,repairing of cracked base Rock breaker and repairing and alignment of drive shaft, Conveyor chain and Flight bar of F/B No.5,AMPC.

Repairing and re-conditioning of (A) Control pannel 440 Volt for Welding Generator sl. No. 901205-xx12 installed at Electrical Shop and (B) repair of Air Compressor set ELGI make Sl. No. 12470 installed at Heavy Repair shop under RRS Dakra, NK Area

Dismantling, laying, pipe cutting, jointing (welding) etc. of 6 inch dia, 8 inch dia and 10 inch dia pipeline for the shifting of pumps at Main Sump and Jehlitand Sump as and when required for one year under KDH OCP, NK Area

Complete Repairing/Overhauling 600 Amps Big Size Welding Machine 550V 3 Phase Oil Cooled and Repairing/Overhauling and Cork Sheet and Brass Stud Changing of 100KVA,550V/440V 3 Phase Transformer Sl.No.820023 at MDC(ii)Changing of Cork Sheet along with