Fabrication Tenders in Jharkhand

Providing fabrication and erection of 01 no. 20 Mtr height tower and poles for heightening of 6.6KV OH line at Lalmatia Feeder near Simra - Lalmatia overbridge Haul Road of Rajmahal OCP

For repairing of fabrication of driver seat door glass, lock ,cabin chassis box and water pump poplar Shaft yock teeth etc. at fire tender no.JH10AA-6536 at SAW under Sijua Area

Planning, Design, Engineering, Construction, Fabrication, Erection, Supply, Installation, Testing and Commissioning of 33 KV Sub-Station at Giddi Washery Argada Area alongwith Operation and Maintenance of substation (plant) for five years

Making of adjustable slide plate of steady for gun metals 03 Pc of NH26 lathe M/c and fabrication of tool post of lathe machine (10 inch bed size) at RRWS

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Fabrication of 01 One number new pontoon and repairing of two number olddamaged pontoon at RJML OCP; Service Provider

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

(i) Bucket cylinder body assly dismental. (ii) Cylinder body housing polishing. (iii) Bend bucket cylinder piston rod straightening by hyd. press (iv) Piston rod scratch portion grinding. (v) Piston rod spray welding machining polishing.

1.Original new glass changing and fitting. 2. New channel changing fitting 20ft 3. Nut welding by removing internal cover for fitting looking glass 4. Scania looking glass fitting. 5. Change gate lock handle

Repairing, Reconditioning and replacement of MCCB Switch for Unit Store- 01 no, Street light- 01 no, Welding Machine at HR Shop- 01 no and Lighting in HR Shop- 01 no under RRS (NK) Dakra

1. Dismantling of complete hydraulic steering cylinder assly after cleaning from outside. 2. Piston rod straightening and polishing. 3. Piston welding, machining and polishing. 4. Steering cylinder of complete hydraulic testing by the machine.

1. Dump body canopy damaged portion cutting by gas. 2. Dump body canopy straightening by gas heating. 3. Dump body canopy straightening sheet setting by hyd. Jack. 4. Straightening canopy welding by steel electrode.

1.Dismantling of complete hyd. Suspension assembly after cleaning from outside. 2.Repairing of barrel, welding, machining, grinding, honing and polishing. 3.Piston rod straightening and polishing. 4.Suspension assembly complete fitting and hyd.

A. 1.Blade lower side damaged base portion cutting. 2. Base portion developed by new plate cutting, setting and welding with steel electrode. B. 1. Blade front wall outside surface even by gauging electrode.

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Coal Mines; Repairing of impeller neck ring and sleeve making by welding machining of 4000GPM 10PH8 pump Kirloskar make of Rajmahal OCP; Service Provider

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Tungsten Inert Gas (TIG) Welding Equipment as per IS 9604:1994 (Q2) MSE Exemption for Years Of Experience and Turnover Yes | Complete Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 4 (Requested in ATC), Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6426904 Dated : 14-07-2025 Bid Document 1/11, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 10 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 16000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 14 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Registrar IIT (ISM) Dhanbad (The Registrar) 2/11 Splitting

Planning, Design, Engineering, Construction, Fabrication, Erection, Supply, Installation, Testing and Commissioning of 2x5 MVA, 33/6.6 KV Sub-Station at KONAR OCP and Operation and Maintenance of substation (plant) for five years.

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Pipelines, Fabrication of 02 Two number new pontoon for standby replacement purpose in upcoming monsoon at RJML OCP; Service Provider

Gauzing of hardness metal picks from 2 nos teeth type secondary crusher drum roll and fixing of new by steel jointing welding electrode in Black Diamond make feeder breaker installed at Tarmi Siding of SDOCM.

1.Dismantling of complete hydraulic main jack assly after cleaning from outside 2.Repairing of barrel, welding, machining, grinding, honing and polishing. 3.Piston rod straightening and polishing. 4.Hydraulic main jack assembly complete fitting

1. Dump body damaged portion cutting by gas. 2. Dump body damaged portion straightening by gas heating. 3. Dump body damaged portion welding by steel electrode. 4. Ribs at bottom portion welded by steel electrode.

i) Front damage plate cutting ii) New plate welding iii) Blade damaged lower portion cutting iv) Blade lower portion development v) New blade slider bracket making vi) removing broken bolts vii) Blade damaged upper portion

1. Welding and ribs building of crowd mechanism, gausing by suitable electrodes. 2. Line boring of housing as per bush size for press fitting. 3. Hydraulic press fitment of bushing 06 no of crowd mechanism.

1. Complete damage partition new plate 6mm changing 09 nos. 2. New angle changing, alignment and fitting. 3. Roof plate cutting, welding, alignment and fitting. 4. Complete repairing of water tanker 09 khana partition fitting.

1. Broken main pin hole plate cutting by gas. 2. Hole plate cutting by grounded m/c. 3. Hole plate alignment and V shape cutting by gouging electrode. 4. Hole plate welding by steel electrode.

Construction of continuous electric welding in bracing members at every angle joint points required in different tower types in 220KV DC Itkhori Pakribarwadih Transmission Line under Jurisdiction of TSD Itkhori Total 44 nos of Towers

1. Old rack segment removed by gousing electrode. 2. 2X1 plate cutting by gas cutter for inner side welding of handle body. 3. Extra arrangement like Hyd. Jack and puller for straightening of dipper handle.

1. Damage blade arm broken plate cutting in side lower and upper side-12x4 2. New plate cutting, setting and welding in side lower and upper plate. 1. Blade lower side damaged base portion cutting.

1. Dump body damaged portion cutting by gas. 2. Dump body damaged portion straightening by gas heating. 3. Dump body damaged portion welding by steel electrode. 4. Ribs at bottom portion welded by steel electrode.

1. Old rack segment removed by gousing electrode. 2. 2X1 plate cutting by gas cutter for inner side welding of handle body. 3. Extra arrangement like Hyd. Jack and puller for straightening of dipper handle.

1. Boom foot LH side cracked portion gousing. 2. Cracked portion boom foot welding by steel electrode. 3. Both side bracket broken portion cutting by gas and gousing. 4. Old bracket cutting from grounded machine.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Repairing of Yoke Shaft (LHS) and Other related works and fabricators of rear tilt guard mounting base, making of new holes and thread making

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

For fabrication of (i) Pontoon (ii) Mannual Pontoon of (iii) Base Plate and (iv) installation of 4000GPM pump/Motor set with base plate on Pontoon at IV seam quary of Sendra Bansjora Colliery

Repairing of damaged radiator and after cooler assembly and Repairing or fabrication of air conditioner system, hydraulic tank guard, transmission guard, platform, ladder, and step support for Dumper Sl. No - 10281 and 60432.

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Electrical System or Installation, Complete fabrication by repairing replacement of exhisting MCC Panel in silo section of Rajmahal CHP; Service Provider

For electrical house wiring in Kankanee Colliery Attendence romm, Black smith shop, switch room, welding mechanical room, safety office, Blasting officer room an Project officer chamber A.C Point Store etc. of Kankanee Colliery under Sijua Area

1. Welding and rebuilding of worn out splines. 2. Machining of rebuilding splines. 3. New splines cutting on shaper machine. 4. Final finishing of splines both side. 5. Straightening, bend portion of core of brake drum.