Fabrication Tenders in Jharkhand

A. 1.Damage blade arm broken plate cutting in side lower and upper side-12 ftx4 inch 2.New plate cutting, setting and welding in side lower and upper plate. B. 1.Blade lower side damaged base portion cutting.

1. Steering system dismantling. 2. Steering eye holes rebuilding. 3. Grinding of steering holes. 4. New bush fitting. 5. New pin making and fitting. 6. Cracked portion of engine mounting and engine spot welding by steel electrode. 7. Broken

1) Broken boom foot gousing by electrode. 2) Boom foot both side cutting and setting. 3) Boom foot both side welding by steel and low hyd electrode. 4) Oval portion of car body holes rebuilding as per pin size.

Repairing of 2 nos of drill panel 2. 6 nos of drill stator 3. 300 KVA, 11kv/440 Transformer of 9 seam 4. 35 kva welding transformer 5. 20 hp starter volga make for auxiliary fan at Jogidih Colliery

Custom Bid for Services - Deputation of Ex-BHEL Personnel for Technical Supervision of Works of Boiler Pressure Parts, Safety valves, Hangers and Welding Expert during Overhauling of Unit # 7, CTPS Similar Category Operation and Maintenance Power House/Power Plant

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Coal Mines; Repairing of Impeller (02 Nos) Impeller shaft (02 Nos) and neck ring welding/machining of 2500GPM 120MH Kirloskar pump (SCT 200/58-2) of Rajmahal OCP; Servic..

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Coal Mines; Repairing of Impeller 02 nos Impeller shaft 02 nos and neck ring welding machining of 2500GPM 120MH Kirloshkar pump SCT200 58 2 of Rajmahal OCP; Service Prov..

Supply, Fabrication, Design and installation of custom 3D railway themed wall mural made of high density high moisture resistant wood boards. The boards must be 3D carved, artistic coloured paint fixtures, integrated with clear lighting effects, waterproof finishing with clear coat application. The scope includes four mural of WAP-5, WAG-7, WAP-7 and WAG-9 locomotive general diagram There must be four LED boards at bottom of each locomotive indicating population which must be changeable by user in future. Total area would be 92 feet approx.

Providing of V Belt repairing of V pulley to suit to V Belt of fan, Repairing fabrication of new base frame for Kirloskar pump Motor to required size, shape matching on the base frame of Incline

Fabrication of 10nos 4x 3 05 nos and 6x4 05 nos safety Board for writing traffic rules instruction safety slogan safety purpose at Haul road, coal stock Villagers Road Blind heading in Karo OCP BnK Area

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Electrical System or Installation, Repairing of top roller bracket and its related job and fabrication erection of deck plate frame portion in belt conveyor ..

1. Dismantling of hoist rope pulley. 2. Hoist rope pulley shaft to be taken out by hyd. Jack. 3. Pulley shaft rebuilding by machinable electrode. 4. Pulley shaft turning as per required size. 5. Pulley bushing new changing.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

1. Welding and rebuilding of crowd mechanism housing by suitable electrode. 2. Line boring of housing as per bush size for press fitting. 3. Hydraulic press fitment of bushing 06 nos. of crowd mechanism bushing part no. 1040.03.220 01 no.

1.Removing of front wheel. 2. Complete dismantling of leaf spring. 3. Gouging of cracked portion of chassis. 4. Welding of cracked portion of chassis by steel electrode. 5. Grinding of welded portion of chassis 6. Change of spring bolt

Repairing works in LandT CK300 Sl. No. - 768/CIL No.-2940 of AADOCM, Dhori Area. (i) Dismantling an Rep. of boom foot of turret eye holes-02 nos. rebuilding and line boring an reinforcement of eye with round rod welding and

1.Steering system dismantling. 2.Steering eye holes rebuilding. 3.Grinding of steering holes. 4.New bush fitting. 5.New pin making and fitting. 6.Cracked portion of engine mounting and engine sport welding by steel electrodes 7.Broken portion

1. Worn out portion of take up axle both side rebuilding. 2. Both side rebuilding portion grinding as per required size. 3. Damage front wall dismantling. 4. Front wall straightening by gas heating. 5. Front wall re-setting and welding.

1. Welding and rebuilding of crowd mechanism housing by suitable electrode. 2. Line boring of housing as per bush size for press fitting. 3. Hyd press fitment of bushing 06 nos. of crowd mechanism bushing part no. 1040.03.220 01 no, 1040.03.266

1. Old rack segment remove by gousing electrode.plate cutting by gas cutter for inner side welding of handle body. 3. Extra arrangement like hyd. Jack and puller for straightening of dipper handle. 4. Gousing of broken portion of handle body after

1.Welding and rebuilding of crowd mechanism housing by suitable electrode. 2.Line boring of housing as per bush size for press fitting. 3.Hyd. Press fitment of bushing 06Nos. of crowd mechanism 4.Housing roof sheets dismantling, structure channel

1. Damage blade arm broken plate cutting in side lower and upper side-12 feetx4 feet 2. New plate cutting, setting andwelding in side lower and upper plate. 3. Pin hole oval worn out portion welding build up as per size.

1. Repairing of operator cabin floor damage sheet cutting and new sheet welding. 2. Repairing of operator cabin both side door. 3. Door lock both side new fitting. 4. Denting of front glass frame. 5. Door glass new fitting with rubber.

Strengthening the bottom portion of 49 Nos at NHS double story and D type existing LT OH line rusted steel tubular poles by providing support with MS angle plate through welding and covering by concreting at Urjanagar Colony of Rajmahal Area

Repairing/welding cardon coupling and pin (dia. 100mm) and 07 nos. (LHS and RHS) bottom rollers with minor repairing with fitment of lock plate and mounting bolts and washers and cooler motor mounting bracket, shroud and front guard of Shovel E165.

1. Taking out of broken bolts from undercarriage body 28 nos. 2. Making of thread through taping process. 3. New bolts 28 nos. and washers 56 nos fitting. 4. Body cracked portion gousing. 5. Undercarriage body cracked portion welding electrode.

a. The damage structure of the all four side of the cabin straightening, rusted portion of structure cutting and new M S Sheet changing and welding. b. Both side of the gate of operator cabin straightening repairing and refitting and new

1. Taking out of broken bolts from undercarriage body 28 nos. 2. Making of thread through tapping process. 3. New bolts 28 nos. and washer 56 nos. fitting. 4. Body cracked portion gousing. 5. Undercarriage body cracked portion welding by

1.Old rack segment removed by gas cutting and gauging 2.Grinding of handle body to remove burr from the surface. 3.Three layer welding of new rack handle and rack by steel joining electrode 4.Repairing of dipper eye end.

Repair of tilt cylinder eye both side blade arm trunion worn out bushing 05 Nos track roller track roller guide plate both side carrier roller mounting and welding of all damaged chain bush of D11T D2 Dozer of Piparwar Project

1. Repairing of 01 no. adaptor and bit sub. 2. Adaptor and bit sub cutting by gousing electrode. 3. New thread making. 4. Adaptor and bit sub welding by steel electrode. 5. Over spreaded yoke portion cutting by gousing electrode.

Repairing/replacement of idler assly 02 nos. and its track frame collar repair both side and cracked track frame welding. 2. Repairing of damaged RHS tensioner assembly dismantling opening, new stud bolt with nut making, seal kit changing and also

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Pipelines, Repairing of 02 nos impeller 01 nos impeller shaft and neck ring outer inner welding of 250 300 GST model Mather Platt Pumps of Rajmahal OCP; Ser..

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Repairing of 02 nos upper cashing body stator of 54KW Plyght pump by aluminum welding and 02 nos compling rebore key stool making for shaft HT pump at Rajmah..

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - COAL MINES; Repairing of 02 nos impeller 02 nos impeller shaft and neck ring outer inner welding of 2500 GPM 120MH Kirlasakr pump SCT 200582 of Rajmahal OCP; Service Pro..

For towards fabrication of (i) pontoon of size 21 x 21 (ii) manual pontoon of size 8 x 6 (iii) installation of 3000 GPM Pump Motor Set with base plate on pontoon Basdeopur Colliery under Sijua Area

1.Repairing of upright support(RH) and (LH) catwalk bend gate etc of Dumper sl no D60917 and AD60881.2.Repairing of transmission guard and engine guard bonnet cover of D60396 D61064.3.Repairing of muffler installation with fabrication

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Coal Mines; Fabrication Repairing of 09 Mtrs and 11 Mtrs long Old Damaged steel Tubular poles for Overhead lines at Urjanagar Colony of Rajmahal Area; Service Provider

A. 1. Boom hoisting gear box worn out re setting by hyd. jack. B. 1.Dipper handle broken portion cutting by gas.

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

Please Refer ANNEXURE B in Tender Document

For (i) dismantling of old and damaged pontoon (ii) fabrication of Pontoon of Size 21ftx21ft(iii) Manual pontoon size 8ftx6ft(iv) Installation of base plate of 4000/2000 GPM Pump/Motor on Pontoon at devoting for required OCP

For towards (i) lifting and lowering of submersible pump/motor cable and pipes (132 mtr- 6 dia) (ii) fabrication of pit opening cover for the safety of Manpower at 6- pit of Sendra Bansjora Colliery under Sijua Area.

SITE FABRICATION (INCLUDING FINAL PAINTING) OF DUCT, DUCT SUPPORTS STRUCTURE MATERIALS FOR APPROXIMATE WEIGHT 120 MT FOR BOILER#3 WITH RAW MATERIALS IN RUNNING METERS SUPPLIED/TO BE SUPPLIED FROM BHEL AT 3X800 MW PVUNL PATRATU SITE, JHARKHAND

For towards fabrication of (i) pontoon of size 21X21ft (ii) manual pontoon of size 8X6ft (iii) installation of 4000GPM pump/ motor set with base plate on pontoon at IV seam quary of Sendra Bansjora Colliery under Sijua Area

Fabrication and fitting fixing of GCI open storage shed for improving of storage and handling capacity for high rise materials and protection of emergent and costly materials from direct sun, rain, dust along with lighting arrangement at Transmiss