Fabrication Tenders in Odisha

Construction of bricks and concerete Welder Training Centre at 2X660MW,TTPP,Talcher, Odisha

CONTROL PCB, Part no.WR1613101001, SYNCHRONISING PCB RS400, Part no.WR1611130041, ROTATORY CAM SWITCH, Part no.1611101097, POTENTIOMETER 5K OHMS 3W, Part no.1651685569, DIODE THYRISTOR BRIDGE, Part no.1611642441, FUSE ELEMENT 8A, Part no.1651685055, SWITCH LOCAL 6A 250V, Part no.1611621043, FUSE HOLDER BLACK, Part no.1611101197, OUTPUT TERMINAL, Part no.1611621041

Portable Single Operated Rectifier Type DC Arc Welding Set Suitable for Manual Arc Welding Process as per IS 4559 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6501248 Dated : 30-07-2025 Bid Document 1/8, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Fabrication of cutting edge from worn out cutting edge of grader, strengthening of cutting edge by stringer beads and fixing to the bucket equivalent to length of too and hard facing work of bucket of LnT Payloader (Sl.No.1373) working at Samleswari

PRINTING OF OFFICE FILE, PRINTING OF CASE FILE, PRINTING AND FABRICATION OF KEY TALLIES, PRINTING OF DOOR STICKERS, PRINTING AND FABRICATION OF MOUSE PADS

Fabrication and erection of different sizes of new Pontoons and repairing of old damaged 60 drum pontoons for installation of pumps, accessories shifting and cable laying near Pontoon at different sumps of Balram OCP, Hingula Area for a period of 365

Supply ,Fabrication and Erection of Monoblock Gate and Hoist of MV -04 Check Dam (MA -05-0028) over Local Nalla near Village MV-04 in Malkangiri G.P of Malkangiri Block under Minor Irrigation Division ,Malkangiri for the year 2022-23.

Day to day repair, maintenance , installation, dismantling fabrication, erection etc. in the circuit no. 3,4,5,6 and 7 of CHP plant, Lingaraj OCP for a period of one year as and when required basis as per the direction of Engineer in-charge

FABRICATION TRANSPORTATION AND ERECTION OF 3 NOS. OF WHEEL GATES AND THEIR HOISTING SYSTEM (SIZE-4000MM X 3575MM) OF C/R AT RD 5285M OF DARPANI BRANCH CANAL UNDER RENGALI IRRIGATION CANAL DIVISION-III KHUNTUNI FOR THE YEAR 2021-22.

Dismantling of worn out MS plates / liners and fabrication /erection of the new MS plates along with wear resistance liners at different impact zones i.e. transfer chutes, vibro feeder hoppers etc of New Silo, BOCP for a period of one year.

Fabrication of office room and rest room at MCR floor in Power House for capital maintenance of Unit 2 and Unit 4 and Repair and maintenance of Generator Sub-Division Office at MCR floor in Power House of UIHEP, Mukhiguda

Supply, Fabrication, Erection of 05 nos. of scouring sluice gate for Anti sea Erosion work to protect saline Embankment and mouth of river Baudha( From Sunapur Bhagyadevi Temple to Fishery jetty and Anantaraypur to Patisonepur) at inlet RD 340m in Ga

Laying and dismantling of M.S Pipeline for dewatering of mine water to facilitate for Coal and OB production, operation and maintenance of water sprinklers and fabrication of 05 nos. of Base Plate for pump and motor set at Lakhanpur Area

Demolishing of damaged concrete RCC Base, dismantling of M.S Foundation frame and Casting of new concrete RCC Base with fabrication of new M.S Foundation frame for Pump-Motor No-3 of Phase-II along with anticorrosive painting of all foundation frame

FABRICATION, ERECTION, TESTING AND COMMISSIONING OF TWO NOS. SLUICE GATE (SIZE-2000MM X 1800MM) AND 3 NOS. SLUICE GATE (SIZE-1800MM X 1200MM) OVER BADAHARIPUR TO BEGUNIA JORE CHECK DAM AT RD-4300 MTR. NEAR VILLAGE NISCHINTA UNDER DRAINAGE DIVISION, B

Making of 2sets HT pontoon(2x2x30drums)and making of 2nos.LT pontoon(2X30 drums)with plastic drum(heavy duty)new pontoon size(HT 5.652mtrX3.624mtr)and (LT 4.710mtrX3.672mtr)including fabrication of Angle frame, nut and bolt of top cover plate at HOCP

Repairing of 01 no. of 96 Drum float, 02 Nos. 60 drum float, 01 no. of HDPE floating Docks and Fabrication of 02 nos of Pump Motor Shed and 02 nos of 24 nos drum Float at Garjanbahal OCP, Basundhara Area

Supply fabrication, transportation erection of Gates and Hoists by dismantling old gate structure of Kaudia Sluice on K V Rt Embankment at RD 67 300 KM of Gop Irrigation Sub Division under Nimapara Irrigation Division Nimapara for the year of 2025

Day-to-day repair, maintenance, installation, dismantling, fabrication, erection etc. in the circuit no. 3,4,5,6 and 7 of CHP Plant, Lingaraj OCP for a period of two years as and when required basis as per the direction of Engineer in-charge

Fabrication of 02 nos. of 96 drum float, 02 nos. of 24 drum floats for Garjanbahal OCP and 01 no. of 100 drum float, 02 nos. of 12 drum float for Kulda OCP for mine dewatering and pumps at Basundhara Area

Fabrication of Pontoon and Pump Shed and Repairing of Pontoon Work for the Purpose of Dewatering and Fire fighting Operations as per requirement on the Instruction of Engineer-in-Charge for a Period of One Year at Kaniha OCP, Kaniha Area.

Supply ,Fabrication and Erection of Monoblock Gate and Hoist of MV -12 Check Dam (MA -05-0027) over Local Nalla near Village MV-12 in Malkangiri G.P of Malkangiri Block under Minor Irrigation Division ,Malkangiri for the year 2022-23.

Diversion and laying of new M.S. pipeline for dewatering mine water and firefighting in Coal Stock of size 10 inch, 8 inch and 6 inch and Fabrication and repairing of pontoon for upcoming monsoon at Lakhanpur OCP, Lakhanpur Area, MCL

Making of Earth Pit and fabrication installation of 02 nos. of Switch Board 415 Volts, 250 Amps, 03 pole for Power distribution work at siding-3, Iocp and newly installed transformer for instant shower system at ROB, LOCP, IB Valley Area.

Supply, fabrication, transportation and erection of CR Gate of disty.No.6(C) at RD 230mtr near HR of Disty No.6C1 of Somepur irregation section of Kissannagar Irrigation Sub-Dvn. under Mahanadi South Dvn., Cuttack for the year 2025-26.

Rehosting the tender for Supply, Fabrication and Painting of Structure for Conveyor Gallery, Trestles, Transfer houses for Construction of CHP for Transportation of Coal (10 Mty) from Head End of Pipe Conveyor at Transfer House TH-2 to Silo (Under Co

Dismantling of clarifloculator structure Breaking of axil concrete base and making new. fabrication where needed and erection the same and alligment of center axil of PH-II Clarifloculator no-2 of IWSS. Dismantling of old suction and delivery bend a

Supply fabrication erection testing and commissioning of 2 Nos Scouring Sluice gate of Andharinadi I Check Dam 2 Nos Scouring Sluice gate of Andharinadi II and 2 Nos Scouring Sluice gate of Andharinadi III Check Dam under MI Division Anandapur

FABRICATION, ERECTION, TESTING AND COMMISSIONING OF 3 NOS. CHECK DAM GATE OF BHAGAPOSI CHECK DAM, 3 NOS. CHECK DAM GATE OF DHOBADHARA CHECK DAM AND 2 NOS. CHECK DAM GATE OF THAKURANIBEDA CHECK DAM OF PATNA BLOCK UNDER M.I DIVISION, KEONJHAR.

Fabrication of M.S structure for structural steel strengthening work of existing PH-I Monorail Beam OH crane, M.S Grills of various sizes for covering DLB Pittop mouth and manhole points of WTP for ensuring safe operation and maintainance purpose in

AMC work for day to day work of dismantling, laying and jointing of pipe lines and shifting of pump, motor and pontoon, fabrication of new pontoon as required alongwith making of shed for Pump and motor over pontoons at Jagannath OCP

Fabrication of various sizes pontoon, safety railing along the four sides of a pontoon and also 12 drums floatings for cable laying from surface to pontoon including supply of Iron Materials and Plastic/Iron drums, repairing of pontoon for Ananta OCP

LAYING OF M S PIPELINE RANGES OF DIA 6 inch ALONG WITH FABRICATION AND INSTALLATION OF PONTOON AND FLOATING DOCK FOR PROVIDING WATER SUPPLY TO CONSTRUCTION WATER SYSTEM FOR COAL TO AMMONIUM NITRATE 2000 TPD PLANT OF BCGCL LAKHANPUR JHARSUGUDA ODISHA

Design, Supply, Fabrication, Erection, Testing and Commissioning of 3x600 MT Mounded Type Pressure Vessels for LPG storage and nos. x 18M Dia. x 13.5M High Cone roof vertical tanks for fire water storage at LPG Bottling Plant Project, Khorda, Orissa

Fabrication and erection of display board using stainless steel frame and fixing of safety instructions for prevention of electrical theft using vinyl print stickers as per direction of Engineer I/C at various locations of colony and time office prem

Custom Bid for Services - FABRICATION AND ERECTION OF PIPING AND STRUCTURE FOR INSTALLATION OF 02 NOS 4000 KW INTER STAGE COOLERS IN PHASE 03 06 07 AREAS ALUMINA PLANT NALCO DAMANJODI Similar Category Operation And Maintenance Of Other Machines And Plants

Fixing of new picks and holder by welding in the crusher rolls including cutting of Old damaged picks holder and cutting of damaged picks From holder and fixing of new picks in the same holder in CHP OF CKT 3,4,5,6 and 7 at Lingaraj OCP

AMC Work for fixing and welding of holder and picks, picks washer etc on Crusher roll Ckt No. 1,2,3,4 and 5 of Feeder Crusher and on secondary crusher roll Ckt. 3 of Feeder Crusher of Jagannath OCP, Jagannath Area for a period of one year

Portable reliable high performance inverter technology, high power efficient DC based single phase, Input: 5 to 8 KVA, current: 150 Amp. Welding machine with 3 mts earth copper cable and 03 mts Holder cable with holders. Make: MIGATRONIC/ESAB/SUPERIOR or similar with same specification.

Rebuilding of flight bars end pieces of BEC make feeder breakers as per desired dimension which include cutting of damaged end pieces, making of end piece and fixing them by welding as required as per the direction of EIC of CHP plant, Lingaraj OCP

Laying,Aligning of a new MS pipeline(8in dia),Along with welding of Flanges, Bends, in 200mm black M.S pipe from the 19(x)CUT Borehole Pump House to existing water supply pipeline extending from L1 Pump House to Water Treatment plant,Talcher Colliery

laying of MS pipeline 8 inch dia, making of short pieces / tee / bend 8 inch dia, loading and unloading of MS pipe to mines, welding of flanges, matching of pipes, providing of MS nut and bolts, cutting of gaskets etc. for dewatering of HOCP.

Portable reliable high performance inverter technology, high power efficient DC based single phase, Input: 5 to 8 KVA, current: 150 Amp. Welding machine with 3 mts earth copper cable and 03 mts Holder cable with holders. Make: MIGATRONIC/ESAB/SUPERIOR or similar with same specification.

GI Sheet for repairing the generator outer body or frame, GI Pipe for support structure and necessary for connecting various parts, Ribbit for attaching sheet metal, Metal putty to fill cracks or holes in metal parts and outer body, Metal Paint to ... panels, Welding work to ...

Paver blocks, Tiles filler material, Filler Sand, Labor Cost, Transportation

SUPPLYING, FABRICATING, BLASTING, PAINTING, TESTING / EXAMINING , TRANSPORTATION OF FABRICATED STRUCTURAL STEEL TO BPCL, BARGARH SITE, ODISHA

Design, fabrication, supply, erection and commissioning of Electrostatic precipitator (ESP)

Design, Fabrication, Supply, Installation and Commissioning of Computed Radiography System

Design, Fabrication, Supply and Commissioning of 11kV 433V unitized substation

FABRICATION, ERECTION, TESTING AND COMMISSIONING OF 3 NOS. CHECK DAM GATE OF BADIA CHECK DAM, 3 NOS. CHECK DAM GATE OF JAYANTA-I CHECK DAM,3 NOS. CHECK DAM GATE OF JAYANTA-II CHECK DAM OF PATNA BLOCK UNDER M.I DIVISION, KEONJHAR