Fabrication Tenders in Tamil Nadu

MTPS II Mech II CHP II Fire Protection System Replacement of worn out Fire Hydrant pipe lines at PTP area of MTPS-II including supply erection fabrication and commissioning

Dismantling fabrication erection and commissioning of Pan No 1 Vapouer space shell from above the calendira with top roof save all complete vapoure line with bend labour contract work

Dismantling fabrication erection and commissioning of clarifier Dorr 3rd and 4th compartment bottom tray plate mud scrapper with boot coil pipe damaged stirrer to be fixed labour contract work

TTPS Operation Circle CAD Fabrication and erection of new M.S structural working platform for additional storm water sump at storm water pump house II of unit IV and V

Standardization of rates for fabrication, Erection and Dismantling of Light Structurals, Tankages, Conveyors and Erection of equipments and machineries at Unit I and TNPL Cement Plant for 2026-2027

Fabrication of MS Box for keeping sand packets and safety U clamps in locomotive, as per sketch attached. Note: One sample to be got approved before effecting bulk supply.

Fabrication, Repair & Replacement work in 2 Nos of 8 wheeler tower wagon- RU 05879 , RU - 97880 and 1 No of 4 Wheeler Tower Wagon - RU 9512 in Chennai Division

Fabrication and supply of 1 in 8.5 Diamond crossing with single slips [ Curved Switch] BG for 60Kg. Rail (UTC) on PSC sleeper layout complete with CMS Acute X- ing

Custom Bid for Services - CC026323 Supply Fabrication Erection And Testing Of CPVC Pipes And Fittings For Replacement Of Leaky MSRL Lines In Cogen Plant At Manali Refinery If CPCL

mangalam IS 814:2004 With Latest Amdmnt. Covered Electrodes for, mangalam IS 814:2004 With Latest Amdmnt. Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steel 350 MM

TTPS Mech II BM Unit V Strengthening of attachment welding joint in Hot re heater assembly and cold re heater assembly of Unit V Boiler during overhaul for the year 2023 2024

Maintenance works in 22KV and 415V HT and LT supply system and welding supply system attending defects and routine maintenance works in electrical installation under jurisdiction of Site Fuse Off Call section

[Flat chipping hammer chisel, 180 mm length, made of hardened steel, suitable for use with pneumatic chipping hammer (ACH 16 NITTO MAKE). Used for removal of welding slag, spatters, and surface cleaning.]

[Flat chipping hammer chisel, 180 mm length, made of hardened steel, suitable for use with pneumatic chipping hammer (ACH 16 NITTO MAKE). Used for removal of welding slag, spatters, and surface cleaning.]

[Flat chipping hammer chisel, 180 mm length, made of hardened steel, suitable for use with pneumatic chipping hammer (ACH 16 NITTO MAKE). Used for removal of welding slag, spatters, and surface cleaning.]

[Flat chipping hammer chisel, 180 mm length, made of hardened steel, suitable for use with pneumatic chipping hammer (ACH 16 NITTO MAKE). Used for removal of welding slag, spatters, and surface cleaning.]

[Flat chipping hammer chisel, 180 mm length, made of hardened steel, suitable for use with pneumatic chipping hammer (ACH 16 NITTO MAKE). Used for removal of welding slag, spatters, and surface cleaning.]

MTPS I BM Unit II Boiler pressure parts COH 2024 Rectification Replacement of defective tubes in burner corner water wall tubes and bends and fin welding at Boiler I st pass area

TTPS Mech II TM I Unit I II III Breakdown maintenance of regenerative system and welding of associated pipe lines from the date of commencement of work and upto 31 03 2022

TTPS Mech II TM I Unit I II III Breakdown maintenance of regenerative system and welding of associated pipe lines from the date of commencement of work and upto 30 09 2022

Female fast gas connector part no:9568903 suitable for Kemppi fast MIG pulse 450 welding set with hose clip.(With one year warranty)Make: Kemppi, Messer, SWPS,ADOR,ESAB Make/Brand: SWPS

Procurement of consumable spares suitable for 3M speed glas 9100 FX Auto darkening welding helmet with respirator system.Qty :1 Set. One set consists of spares (1)Adflo breathing tube(834016) Qty :10

Electrical Hot Air Welding Gun with 5 mm dia tubular nozzle. Technical Specification: Power Output: 2000W, Voltage:230V, Frequency: 50/60Hz, Temperature:20 degree C - 600 degree C, Two Step Air flo

1.20mm CO2 MIG Welding wire layer( Each roll : 15 kgs) Make: Sun Bond or Adore only.Note: 1. Firm should submit authorised dealership certificate along with tender or proof of purchase from authorised

Electrical Hot Air welding gun with 5mm dia tubular Nozzle. Technical Specification: Power OUtput:2000W, Voltage:230V, Frequency: 50/60Hz, Temperature:20 degree C - 600 degree C, Two Step Air flow: 30

Driver Card of specification - Model No: RT-CPK-004-A2 or equivalent suitable to Shineweld make Portable single operator Rectifier Inverter based (IGBT) double bridge type DC Arc welding set, three p

SUPPLY OF ONE SET OF ALUMINIUM INNER FRAME ( SINGLE PIECE DESIGN WITHOUT ANY WELDING JOINT) WITH HARDWARE TO DRG. NO.LSCN/PP2 (755)-5-4-002, COL-I, ALT-j FOR AMRIT BHARAT.

Compressed Oxygen Gas For Industrial Use Including Welding And Cutting to IS.309/2005 (fourth revision). NOTE : 1) Supply should be effected in part quantity based on consignee request. 2) Empty cylin

WELDING HOSE WITH FLUTED COVER FOR ACETYLENE (RED COLOUR) OF8MM BORE, CONFORMING TO SPEC. IS 447/87 (MINIMUM LENGTH 30 METERS)WITH FOLLOWING PARAMETERS. THE HOSE SHALL BE INDELIBLY MARKED WITHISI STAN

Stationary Welding Electrode Drying Oven. As per following Specification & Annexure attached. 1) Input Current 10 AMP (Min) 2) Input Supply 220/240 V AC. 3) Thermo Static Control 50 Degree 300 Degree

Rocker Switch, DPST, 4Pin, 250V AC, 30Amps Cut Out Size : 22mm X 30mm, Material : Faston Thermoplastic Housing, Switch Function : ON / OFF. It should be suitable to 250 Amps single phase welding pla

Procurement of different types of welding gauges, Number of items,quantity and specification as per Annexure - A. . NOTE: (1) S.Nos. 1 to 4 with quantities mentioned against each makes one set. (2

Web welded with Top plate as per Drawing No LE11317 Alt a & LE11319 Alt a with welding as per RDSO guidelines for IRSM-41 and with Red Oxide Zinc Chromate Primer Coating

MEMBRANE SWITCH PANEL MX EVO, SUITABLE FOR READY REPLACEMENT IN WIRE FEEDER MODEL PROMIG 501 OF PULSED MIG WELDING SETS KEMPPI MAKE, PART NO:4296680 OF SWPS MAKE OR SIMILAR. > Make: SWPS.

Supply of set of spares suitable for Kemppi make MIG-MAG Welding sets, as per the details enclosed. Make: KEMPPI. ( Warranty Period : 6 months from the date of supply against manufacturing defects)

CONTACT TIP 1.2 MM, TYPE M6, MADE OF CuCrZr, SIZE 9x45MM (ODxLENGTH).REQUIRED FOR ASBT- 500 MIG WELDING TORCH. BRANDS- ABICOR BINZEL, TBI, MIGATRONIC ONLY., as per Drawing: MIGATRONIC's PART NO.80231

SKV WELDING EQUIPMENT WITH FULL ACCESSORIES AS PER RDSO 's SPECIFICATION NO.TM/SM/9 DATED:-16/08/1991 and TM/SM/10 dt.16.08.1991. Items to be supplied as per Annexure attached

Supply of set of spares suitable for Kemppi make GMAW Welding Sets, Power Source: Hi Arc M400R, Wire Feed: F30 in service at LHB Shed, as per the following details. Make: KEMPPI.

Supply, Installation, Testing and Commissioning of 7.7 Inch LCD Display Flat Rectangle type, suitable for Teach Pendant KCP2 of M/s. Kuka make Robotic Welding Machine as per the details enclosed. Ma

Tungsten Inert Gas (TIG) Welding Equipment as per IS 9604:1994 (Q2) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

Fabrication of platform

Threading Bending Welding painting of red oxide aluminum paint and delivering as 33 KV Lines Stay rod along with GI M18 Nut GI Washer at Mettur Workshop including receipt of cut lengths of 20 mm MS Rod from Mettur workshop cost of consumables et

C100201008, C100201014, C100201020, C100201022, C100201025, C100201028, C100201032, C100201036, C100201040, C100201050, C100201063, C100502250, C100502400, C100603090, C100603160, C100603200

Supply, fabrication, modification, dismantling and erection of metal structures , pipe supports for implementation of design change notice and revised working drawings inside reactor building of KKNPP unit 3 and4

FABRICATION AND SUPPLY OF M. S. WELDED PIPE WITH BUTT WELD ENDS OF I. D. 600 MM, WALL THICKNESS 6 MM IN, MS ELBOW 90 DEGREE ERW 6 MM OD: 600NB, MS WELDED PIPES, 400 MM ID, 5 MM THICKNESS, IN 3 MTR LENGTH, MS WELDED ELBOW MS ELBOW 90 DEGREE 400 MM ID

MTPS I TM UNIT II changing the eroded control valves reducers expanders pipes and bends changing the defective HD 21 isolation valve by cutting and welding changing the eroded HPT Transfer pipe drain line 2 pipes and defective 1 and 2 drain li

Customized AMC/CMC for Pre-owned Products - Mechanical and Electrical Materials Supply Fabrication Argon ArcWelding Supporting CableLaying PanelFixing CableTermination For Installation of Mass Flowmeter Promass E16 Nos Materials; Endress, hauser; An..

TTPS Mech II AHP Fabrication of 274 mm OD M S pipe out of 12 mm thick M S Plate for ash slurry disposal lines of Unit I II III

Design Fabrication supply and erection of spillway shutter Deck bridge counter weight and hoisting arrangements for spillway vent No.1,2 and 3 in Sholayar Dam Valparai Taluk of Coimbatore District

Supply, fabrication and Erection of structure, earth bore, earth mat, earth raiser, erection of equipments, jumpers, laying of cables and end termination, etc., for Establishment of 110KV SS at Kannagapattu