Housing & Quarters Tenders in Gujarat

BALL BEARING SINGLE ROW SEALED COLLAR TYPE (Q3), AUGUR BEARING WITH SQUARE FLANGE UNIT (Q3), SELF- ALIGNING BALL BEARINGS (Q3), ADAPTER SLEEVE (Q3), BEARING UC211-200D1 FLANGED UNIT HOUSING UCF-211- 200D1 (Q3), E Type Flange Bearing, 4 Bolt Cast iron with Shaft Size 3-7/16" (Q3), Bearing 6010 RS (Q3)

Manpower Outsourcing Services - Fixed Remuneration - Admin; Dy chitanish; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Supervisor(additional Assistant Engineer); Diploma, Manpower Outsourcing Services - Fixed ... Ordinator PMAY G; ... Accountant PMAY G; ... Professional PMAY G; ... Ordinator PMAY G; ... Ordinator PMAY G; ...

Group Mediclaim Insurance Service - Permanent Employees, AS PER TENDER DOCUMENT; Hospitalization for accident & emergency Treatments, AS PER TENDER DOCUMENT; Yes

Custom Bid for Services - ---- Similar Category Operation & Maintenance of Data Centre Assets

Group Mediclaim Insurance Service - Permanent Employees, AND AS PER TENDER DOCUMENT; OPD, AND AS PER TENDER DOCUMENT; Yes

Manpower Outsourcing Services - Fixed Remuneration - Others; MIS JUNIOR CLERK; DCA, Manpower Outsourcing Services - Fixed Remuneration - Others; DEPUTY DISTRICT PROGRAM COORDINATOR; MBA OR MRS OR MS OR MSC AGRI OR MTECH AGRI, Manpower Outsourcing ... ACCOUNTANT PMAY G ... PROFESSIONAL PMAY G ... COORDINATOR PMAY G ...

TELECOM WORKS IN CONNECTION WITH "(1) Pratapnagar: Construction/Improvement of Office building and other infrastructures. (2) Pratapnagar: Construction of 4 units Type-V quarters on replacement account of Qrt No. 1, 6, 14 & 15. (3) Ektanagar: Construction of New ORH at. (4) Pratapnagar: Provision of Office/Service building on replacement account for Hospital building, Community Hall, DRM Office campus, etc. at (Excluding Community Hall). (5) Pratapnagar: Construction/Improvement of Service building, etc. and other associated works under the jurisdiction of SSE(W)PRTN. (6) Pratapnagar: Replacement of one block of DRM building (G+2) and creation of related building complex. (7) Pratapnagar: Augmentation of Account and Store Section at First Floor in New DRM Office building.

TELECOM WORKS IN CONNECTION WITH "(1) Pratapnagar: Construction/Improvement of Office building and other infrastructures. (2) Pratapnagar: Construction of 4 units Type-V quarters on replacement account of Qrt No. 1, 6, 14 & 15. (3) Ektanagar: Construction of New ORH at. (4) Pratapnagar: Provision of Office/Service building on replacement account for Hospital building, Community Hall, DRM Office campus, etc. at (Excluding Community Hall). (5) Pratapnagar: Construction/Improvement of Service building, etc. and other associated works under the jurisdiction of SSE(W)PRTN. (6) Pratapnagar: Replacement of one block of DRM building (G+2) and creation of related building complex. (7) Pratapnagar: Augmentation of Account and Store Section at First Floor in New DRM Office building.

Hot Rolled Round Steel Bars as per IS 1732 (Q3), Hot Rolled Strips Flats (Q3), Welding Electrode - Covered Arc Welding Electrode - Basic Type (BEML) (Q3), Emery Cloth (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for ... Strips Flats Time ...

Ring Seal, Ring Local., wear Ring, Hose Arsy, Ring wear, Floor mat, ELEMENT, O Ring Housing, Dust indicator, Dust seal, Hose centryfugal oil filter, HYD HOSE, fuel filter, element filter eye, Air clener Bend, oil seal, Retainer Hose, HOSE ASSY suction, Hose tank side, Hose High pressure, HOSE, 95 LTH 1 2 OIP pipe, 75 LTH 316 op pipe

66 LTH 318 op pipe, 6 LTH 316 OP pipe, 40 LTH 1 2 OP pipe, 33 6TH 318 Hese, 102 1TH 12 Hase, Dust Exculator, Hose Blade lesl, Hose For Centri fuel oil filter, Hydralic pipe, Soal oil, ELEMENT, O Ring Housing, Dust indicator, Dust seal, fuel filter, Air cleaner outer Assembly, mud collector FILTER

Providing water supply line with new grid of enhanced capacity and 02 Nos. underground sump of 4.0 Lakhs and 6.0 Lakhs liter capacity respectively at CRPF campus, GC Gandhinagar. Subwork/Packages: Providing and fixing new water supply G.I. pipe line ... family quarters

Detachable Surgical Blades (Bard Parker Type) (Q2), Sterile Hypodermic Syringe (V3) (Q2), Insulin Syringe (Q2), Infant Feeding Tube (V2) (Q2), Foley's Catheter (Q2), Ryles Tube PVC, Ryles Tube P.V.C. Audult 18, IV Cannula Two Way 3 way stop cock size 22, Surgical Blade size 23, Infant feeding tubes 8, IV Cannula two way 3 way stop cock size 18, prickling Needles Disposable 26G, Spinal Needle 25G, Disposable Suction Catheter, Airways Guedi 1, Disposable Scalp Vein Set 24g, Spinal Needle 23G, Sterile hypodermic Syrings for sinle use with sterile hypodermic needles 2ml. Size of needle for disp. syringe 24 G x 1 inch, Ryles Tube P.V.C. Children 12, Ryles Tube P.V.C. Children 10, Spinal Needle 24G, Airways Guedi 0.0, Infant feeding tubes 6, Disposable Scalp Vein Set, Disposable Needles 16G, Airways Guedi 3, IV Cannula two way 3 way stop cock size 20, Disposable Syringes With Needle CGS, Disposable Syringes With Needle CGS 50cc, IV Canula size 22 CE Certified and should have wings with injection port, B.P. Blade 11 Surgical Blade, IV Canula size 24 CE Certified and should have wings with injection port, Foleys Urinary Catheter size 20, IV Canula size 18 CE Certified and should have wings with injection port, Foleys Urinary Catheter size 16, Pyrethrum Extract 2 pct - in liter, Intravenous Set with Airway and needle, Microdrip set, Pediatric drip set, Simple Plain Catheters, Intravenous Set With Airway and Needle Pediatrics

Manpower Outsourcing Services - Minimum wage - Skilled; Graduate; Others, Manpower Outsourcing Services - Fixed Remuneration - SBMG; SWM CONSULTANT; MSW MBA MASTER IN HR CIVIL ENGINEER AUTOCAD AND COMPUTER KNOWLEDGE, Manpower Outsourcing Services - ... - PMAY G; ... - PMAY G; ...

1. C/o 20 Nos. toilet blocks for Girls and 20 Nos. toilet blocks for boys, 15 nos. Type-III Qtrs. G plus 1, principal Qtrs. i/c, w/s, s/i, drainage, internal e/i for EMRS at Jagana, Ta: Palanpur, Dist: Banaskantha. 2. C/o 15 nos. Type-III quarters G plus 1, Principal Qtrtrs. i/c. W/S, S/I internal Drainage E/I for EMRS at Shamlaji-1, Village: Shamlapur, Ta.: Bhiloda, Dist: Aravalli. 3. C/o 15 Nos. Type-III Qtrs. G plus 1 Principal qtrs. i/c W/S, S/I drainage internal E/I for EMRS at Shamlaji-2, Village: Shamlapur, Ta: Bhiloda, Dist: Aravalli. Subwork/Packages: Geo technical investigation of soil and digital site survey plan for aforesaid EMRS sites.

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286531 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286998 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286639 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286442 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6284716 Dated : 28-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286397 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286743 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286481 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6284652 Dated : 28-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6286714 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6287023 Dated : 29-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

Hot Rolled Strips Flats (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/6284686 Dated : 28-05-2025 Bid Document 1/4 EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Experience Criteria" as defined above subject to meeting of quality and technical specifications. The bidder seeking exemption from Experience Criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. If the bidder is a Micro or Small Enterprise (MSE) as per latest orders issued by Ministry of MSME, the bidder shall be exempted from the eligibility criteria of "Bidder Turnover" as defined above subject to meeting of quality and technical specifications. If the bidder itself is MSE OEM of the offered products, it would be exempted from the "

MCR Footwear (Q3) (3 (3 ))

Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Technical Assistant District MGNREGA; BE Civil, Manpower Outsourcing Services - Fixed Remuneration - Admin; Account Assistant District MGNREGA; BCom, Manpower Outsourcing Services ... District PMAY ; ... Block PMAY ; ... Block PMAY ; ...

JR. HEAD SKIRT (HY-64.0) - UN M/C D SGI C ASTING AS PER DRG. 36036000101/05 WITH MATL AS PER SPEC N. (Q3), BEARING HOUSING FOR FEEDER (HY-506.05. 03) - UN M/C D C ASTING AS PER DRG. 36515500042/03 WITH MATL A (Q3), FEED ROLL SPIDER (HY-506.04. 01) - UN M/C D SGI C ASTING AS PER DRG. 26515500021/00 WITH MATL AS PER (Q3)

Monthly Basis Cab & Taxi Hiring Services - SUV; 3000 Km x 364 hours; Outstation 24*7, Monthly Basis Cab & Taxi Hiring Services - Sedan; 3000 Km x 364 hours; Outstation 24*7

Manpower Outsourcing Services - Minimum wage - Skilled; Graduate; Admin, Manpower Outsourcing Services - Minimum wage - Skilled; Graduate; Finance/Accounts, Manpower Outsourcing Services - Minimum wage - Unskilled; High School; Others, Manpower ... - PMAY ; ... - PMAY ; ...

Facility Management Services - LumpSum Based - Commercial; Upkeep Housekeeping; Consumables to be provided by service provider (inclusive in contract cost), Facility Management Services - LumpSum Based - Commercial; Work associated for inspection ... inspection quarters Holiday ...

Facility Management Services - LumpSum Based - Commercial; Upkeep Housekeeping; Consumables to be provided by service provider (inclusive in contract cost), Facility Management Services - LumpSum Based - Commercial; Work associated for inspection ... inspection quarters Holiday ...

Facility Management Services - LumpSum Based - Commercial; Upkeep Housekeeping; Consumables to be provided by service provider (inclusive in contract cost), Facility Management Services - LumpSum Based - Commercial; Work associated for inspection ... inspection quarters Holiday ...

Hot Rolled Round Steel Bars as per IS 1732 (Q3), Hot Rolled Square Steel Bar (V2) as per IS 1732 (Q3), Steel Pipe/Tube as per ASTM A423 (Q3), Welding Rods and Filler Wire for Gas Shielded Arc Welding of Structural Steel as per IS 6419 (Q4), Welding ... Strips Flats (Q3) ... Strips Flats Bid ...

SS 304 Bollard with MS Pit, Hydraulic Pump, Hoze Pipe, 3 phase Motor, Hydraulic System, Control Panel Board, Loop Detector, Bollard Led with Buzzer, Bollard Head and Crown, Bollard Solenoide Coil, Top Bush, Power Pack MS Housing for Power Pack, Power Cable 4 Sqm Heavy Duty, Power Core Cable 2.5 Sqm Heavly duty, UPS 10 Kva Online, Battery 42 AH 12 V, Industrial Rack, Heavy Duty Cable Duck, Digging and Duting with Resurface of Road Structure as per Digram, Installation Cost

Gear Coupling, Hose Hydraulic, Seal Kit for Jack Cylinder, Ai cleaner bend, Thermostat, Dust Indicator, Strainer, Yoke, Engine Oil Filter, Fuel Filter, Air Cleaner Outer Assy, Air cleaner filter, Flange, Hose Blade Lest, Roller bearing, Master Pin, ... Ring Housing , ...

Facility Management Services - LumpSum Based - Commercial; work associated with Upkeep and Housekeeping; Consumables to be provided by service provider (inclusive in contract cost), Facility Management Services - LumpSum Based - Commercial; work ... inspection quarters and ...

Facility Management Services - LumpSum Based - Commercial; Work associated with the Upkeep Housekeeping; Consumables to be provided by service provider (inclusive in contract cost), Facility Management Services - LumpSum Based - Commercial; Work ... inspection quarters and ...

Steel Shelving Cabinets (Adjustable Type) confirming to IS 3312 (V3) (Q2) MSE Exemption for Years of Experience and Turnover

All in One PC (V2) (Q2), Entry and Mid Level Desktop Computer (Q2), Line Interactive UPS with AVR (V2) (Q2) MSE Exemption for Years of Experience and Turnover

Manpower Outsourcing Services - Minimum wage - Unskilled; Not Required; Others

Monthly Basis Cab & Taxi Hiring Services - Sedan; 2500 km x 320 hours; Outstation

Rate for Civil Works for ELWB Foundation along with Ramp using M25 Grade RCC, Rate for Weatherproof Junction Box Housing, Rate for ELWB Earthing, Rate for Govt Stamping and Calibration Charges on NEW Weighbridge Basis incl Govt fees, Rate for Dismantling Relocating Reinstallation of ELWB from RWC Kandla to CFS Kandla and Rate for Installation and Commissioning Charges at CFS Kandla, Rate for Top Surface Painting with Anti corrosive Paint of best quality like Berger or Asian Paints, Rate for OIML Approved Digital Loadcells IP68, Rate for Digital Indicator, Rate for Digital LC Junction Box, Rate for Power Protection Device, Rate for HD USB Keyboard, Rate for ELWB Software, Rate for AMC of 02 years Annual based

Steel Flat as per IS 2062 (Q3), Hot Rolled Steel Flats as per IS 1730 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Steel Flat as per IS 2062 Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number : GEM/2025/B/6676510 Dated : 12-09-2025 Bid Document 1/7 ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Pneumatic impact wrenches (Q3)

Enamel, Synthetic, Exterior (A) Undercoating (B) Finishing (V4) Confirming to IS 2932 (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Past Performance, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6892826 Dated : 15-11-2025 Bid Document 1/6, -- Number of days for which Bid would be auto -- extended 3 Number of Auto Extension count 1 Past Performance 20 % Bid to RA enabled No Type of Bid Single Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Line Interactive UPS with AVR (V2) (Q2)

Portable Welding Machine (V2) (Q3)