Loading
Loading…
Loading…
3,622 results • Best match
Construction and maintenance of Road works
Construction of road side concrete drain with cover slab in stretches at Mukundaprasad market area from Km. 298.600 to 299.000 on RHS of NH 57 for the year 2021 22 under Urban Link
Construction of Foot Over Bridge FOB near Puri Canal at Km. 6. 150 on Chandikhole Jagatpur Bhubaneswar Section of NH 16 in the state of Odisha on Engineering Procurement and Construction EPC Mode
Construction of Pedestrian Guard railing with paver block and safety kerb on canal embankment between Manasapolo to Check Gate on NH 20 Ch. 189.680 to Ch. 190.093 Km. for the year 2026 27.
Road work
Road
As per DTCN
Drive shaft with self aligning bearing, sleeve & plummer block as per Drg No. 10212 -19- SRW-00-00, Compression Spring Type T24 (1 set of 8 nos), Universal Coupling, Cardon shaft NH 175 suitable
telephone instrument single push button (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Two Packet Bid Primary product category telephone instrument single push button Bid Number : GEM/2025/B/6363094 Dated : 23-06-2025 Bid Document 1/8 Time allowed for Technical Clarifications during technical evaluation 4 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting
Electric Motor Siren (01 KM Range), Installation of Siren
Smoke and Heat Detector (combo) Testing Kit
8inch 600, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 16inch 600, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 10inch 600, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 6inch 300, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 6inch 150, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 2inch 300, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 24inch 600, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 12inch 600, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 4inch 600, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5, 3inch 300, Blind Flange, Materail ASTM105, Manufacturing process Forged, Raised face end facing surface 125AARH, Dimension standard ANSI B16.5 Bid Number : GEM/2025/B/6611162 Dated : 26-08-2025 Bid Document 1/12
Cold applied coating tape 3PLY inner warp, Cold applied coating tape 2PLY Outer warp, Primer, cold tape coating, Liquid Epoxy KIT
General Purpose Battery Chargers (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years Of Experience and Turnover Yes | Complete Document required from seller Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? No -- Minimum number of bids required to disable automatic bid extension 1 Bid Number : GEM/2025/B/6594908 Dated : 22-08-2025 Bid Document 1/6, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 4 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank ICICI (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 17 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : GAIL INDIA LIMITED ORISSA, GAIL India Limited, GAIL India Limited, Ministry of Petroleum and Natural Gas (Gail India Limited) Splitting
Fire Fighting Hose, Triple Purpose Nozzle
ON LINE LEAK REPAIR CLAMP, SPLIT SLEEVE TYPE SIZE 18IN DIA PRESSURE RATING 600LBS, ON LINE LEAK REPAIR CLAMP, CLAMP SPLIT SLEEVE TYPE SIZE 12IN DIA PRESSURE RATING 600LBS, ON LINE LEAK REPAIR CLAMP, CLAMP SPLIT SLEEVE TYPE SIZE 24IN DIA PRESSURE RATING 600LBS, FULL ENCIRCLEMENT PIPE REPAIR WELDABLE SPLIT SLEEVE, DIA 18IN, PRESSURE CLASS 600, FULL ENCIRCLEMENT PIPE REPAIR WELDABLE SPLIT SLEEVE, DIA 12IN, PRESSURE CLASS 600, FULL ENCIRCLEMENT PIPE REPAIR WELDABLE SPLIT SLEEVE, DIA 24 IN, PRESSURE CLASS 600
Installation of blinds, Roller Blinds, Zebra Blinds
30 inch spacer and blind, 36 inch blind flange and spacer
GASKET SIZE 30IN PRESSURE RATING 600LBS, GASKET SIZE 24IN PRESSURE RATING 600LBS, GASKET SIZE 16IN PRESSURE RATING 600LBS, GASKET SIZE 10IN PRESSURE RATING 600LBS, GASKET SIZE 8IN PRESSURE RATING 600LBS
Procurement of Lead Acid Battery for Odisha Bases on buyback basis, Procurement of UPS Battery for CGD Bhubaneswar and Cuttack on Buyback Bas
Road work
Building work
Construction of road and CD works including maintenance in the District of Kendrapara
IMPROVEMENT OF DRAINAGE CHANNEL
Construction of road works
Road Works
Construction of Paver Road over Kutcha Road
Road Work