Inspection, Testing & Audit Tenders in Bihar

cloth gaberdine disruptive pattern/dyed - Uniforms Average Turn Over of Last 3 Years 200 Lakh (s) Experience with Gov. Required 5 Year (s) Cloth Gaberdine Disruptive Pattern/Dyed - Uniforms ( 62672 ) Technical Specifications * As per GeM Category ... of Quality Assurance , ...

Custom Bid for Services - 200151668 Service contract for NDT (Material mix-up) of Critical Piping of TG and Boiler area during OH of Unit# 08 & 09 (250 MW), NTPC Barauni Similar Category Operation and Maintenance Power House/Power Plant

Drill chuck with key suitable for IR and CP make pneumatic drill machines, Size 10mm 3/8" x 24 TPI make :Grip/Jacob/Turnmax. Proof of purchased from OEM/ Dealer to be submitted along with supply.

Custom Bid for Services - 200154454 Service contract for Boiler area drain vent and impulse lines inspection and NDT work during Overhauling at NTPC Nabinagar(3x660MW) Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Revisioning Testing and Certification of lifting tools and tackles at HURL Barauni Similar Category Calibration Services

Custom Bid for Services - Calibration of Energy Meters at NTPC Barauni Similar Category Operation and Maintenance Power House/Power Plant

SUPPLY And PWCAMC Of ATF CONDUCTIVITY METER at Quality Control Lab of Barauni Refinery

SUPPLY Of Electronic Analytical Balance for Reagents at Quality Control Lab of Barauni Refinery

SUPPLY and PWCAMC of Jet Evaporation Bath at Quality Control Lab of Barauni Refinery.

Hiring Of Agency For ISO Certification Service - SO/IEC – Testing and Calibration Laboratories; Consulting, Surveillance Audit, Re-certification Audit; Guidance for documentation and implementation of relevant management system, Workshop on awareness..

ARC for Servicing and Calibration of dynamic balancing machine (Model No. HDM-650 and HDM-7000) at workshop of Barauni Refinery.

Supply , installation & commissioning of pressure gauge calibration test bench along with master pressure gauge 01 no & accessories as per attached specification

Supply , installation & commissioning of pressure gauge calibration test bench along with master pressure gauge 01 no & accessories as per attached specification

Supply , installation & commissioning of pressure gauge calibration test bench along with master pressure gauge 01 no & accessories as per attached specification

Custom Bid for Services - Calibration of Energy meters installed at NTPC Kahalgaon Similar Category Operation and Maintenance Power House/Power Plant

Testing, Calibration and Setting of Winding Temperature Indicator (WTI) and Oil Temperature Indicator (OTI) of Transformers Installed at IOCL Barauni Refinery.

Supply , installation & commissioning of pressure gauge calibration test bench along with master pressure gauge 01 no & accessories as per attached specification

Custom Bid for Services - Repair Testing Calibration of RPD Meter installed at IOCL CGS Aurangabad Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Custom Bid for Services - 200146230-Online calibration of Energy Meters at NTPC Kanti Similar Category Operation and Maintenance Power House/Power Plant

PROVIDING SERVICES OF ONSITE CALIBRATION/ACCURACY TESTING OF SECURE MAKE ENERGY METERS INSTALLED AT SUGAULI, EAST CHAMPARAN AND LAURIYA, WEST CHAMPARAN, BIHAR

Selection of Laboratories for Testing of Products/Material - TESTING OF 250 PLUS PARAMETERS OF PESTICIDE RESIDUES AND HEAVY METALS AND ETHYLENE OXIDE ETO; AS PER GIVEN ATTACHMENT; Number; TESTING OF 250 PLUS PARAMETERS OF PESTICIDE RESIDUES AND HEAVY..

SUPPLY and PWCAMC of Low Temperature Kinematic Viscosity (LKV) at Quality Control Lab of Barauni Refinery.

HEAVY DUTY AIR CYLINDER TO SIZE 6" BORE, 10" STROKE, 1 3/8" ROD DIA, BOTH ENDS CUSHIONED, CAP FIXED CLEVIS MOUNT, ROD END FEMALE THREAD TO SIZE 1" 14 TPI WITH REMOVAL STUD TO M/S PARKER MODEL NO 6"CBB

SUPPLY and PWCAMC of WaveLength Dispersive X-Ray Fluorescence (WDXRF) at Quality Control Lab of Barauni Refinery

Custom Bid for Services - BMC for Calibration of Electrical Lab Testing Instruments at NTPC Barh Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Refilling of Calibration gases for CNI TG Stg2 for 2 years Similar Category Operation and Maintenance Power House/Power Plant

Rubber Hardness Tester with Specification as per Annexure A. Calibration certificate required from OEM/NABL approved lab. Warranty certificate required as per IRS Condition.

Statutory Testing, Inspection, Cleaning, Calibration Certification and Painting of 3 Nos. X 150 MT above ground horizontal LPG storage bullets at Indane Bottling Plant, Patna

CALIBRATION, FIELD WORK AND PREPARATION OF COMPUTERIZED CHART FOR 9 NOS. A/G STORAGE TANKS & CO-ORDINATION WITH LEGAL METROLOGY DEPARTMENT AT BPCL PATNA TOP

Out of roundness checking fixture for cone bore with calibration certificate as per annexure Make Perfect or Adex Enterprises or Bharti construction Accepted Make: Self

SUPPLY and PWCAMC of One Copper And One Silver Corrosion Bath at Quality Control Lab of Barauni Refinery.

Custom Bid for Services - Monitoring and Verification (M V) Audit under Perform, Achieve and Trade (PAT Cycle VII) scheme of Jamalpur Workshop Similar Category Energy Audit Service - Lumpsum Based

Calibrated Steel Jar for measurement of water with suitable handle for easy and convenient lifting, Capacity - 05 Liters. (With Calibration certificate) Govt Approved. Accepted Make: SELF

Hiring Of Agency For ISO Certification Service - SO/IEC – Testing and Calibration Laboratories; Consulting; Workshop on awareness of ISO certification for employees, Guidance for documentation and implementation of relevant management system, Train..

Custom Bid for Services - CALIBRATION AND TT FILLING ASSISTACE, Custom Bid for Services - ASSIST TT FILLING GANTRY SHIFT BASIS SEMI S, Custom Bid for Services - ASSIST PUMP HOUSE OPERATION, Custom Bid for Services - OFFICE ASSISTANT, Custom Bid for Services - DEPOT OPERATION ASSISTANT SS, Custom Bid for Services - FIRE FIGHTING O AND M, Custom Bid for Services - EXTENDED HOURS, Custom Bid for Services - EXTENDED HOURS OFFICE ASSISTANT, Custom Bid for Services - MAN POWER SUPPORT AFTER 8 HOURS, Custom Bid for Services - DEPOT OPERATION ASSISTANT 1EACH SKILLED AND 1 UNSKILLED, Custom Bid for Services - ETHANOL UNLOADING

Custom Bid for Services - CONTRACT FOR CALIBRATION OF CNI LAB MASTER INSTRUMENTS FROM STANDARD LABORATORY at NTPC kanti Similar Category Operation and Maintenance Power House/Power Plant

Hydrotesting of Loading and Unloading Product Hoses, Testing and calibration Pressure Gauges, Testing and calibration of TSV, Testing and calibration PV Valve, Testing and calibration of PSV

Hiring Of Agency For ISO Certification Service - SO/IEC – Testing and Calibration Laboratories; Re-certification Audit; Guidance for documentation and implementation of relevant management system, Training/awareness program on ISO, Framing releva..

Set of digital temperature controller and thermocouple, as per technical detail in attached annexure A. Make Masibus, Radix, Creative Renuka or similar with calibration certificate and 01 year warrant

Custom Bid for Services - 200140016 - SERVICING & CALIBRATION OF TEST EQUIPMENTS AT FQA TEST LAB FOR 3 YEARS at NTPC Kahalgaon Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Calibration and maintenance of BA machine at crew lobby KIR NJP and MLDT under KIR division N F Railway for a period of three years

Custom Bid for Services - 200156744 ONSITE CALIBRATION OF C&I LAB MASTER EQUIPMENTS FROM NABL ACCREDITED STANDARD LABARATORY FOR NTPC BARH Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Service PR for BMC for Calibration AND Certification of CAND I Lab Master Instruments at NTPC Nabinagar Similar Category Operation and Maintenance Power House/Power Plant

Custom Bid for Services - Recertification and Surveillance Audit of IMS (Integrated Management System Consisting of ISO ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018) for NTPC Nabinagar Similar Category Energy Audit Service - Lumpsum Based

Supply and installation of Toe Load testing machine with standard block & proving ring with calibration certificate for ERC Clip as per Drg No EDO/T-2135(complete job). Additional supply of Applicatio

Heavy Duty Light weight mechanical Tools Model No. - GTW 750 R, SD - 3/4" , 49 - 105 kgf mtr, 475 to 1015 Nu mtrs with calibration certificate. Accepted Firm`s offer Make;-Griphold.

E-70 ELECTRONICS BRAKE TEST KIT FOR THREE PHASE LOCOS AS PER FTRTIL PART No. 025128000. Installation and commissioning to be done by the firm .Necessary test certificate /Calibration certificate to be

Custom Bid for Services - Contract for Upgradation Modification of CB Analyser and DCRM with Servicing and Calibration of Testing Equipments of Scope Make at BRBCL NABINAGAR Similar Category Manpower Outsourcing Services - Minimum wage

Custom Bid for Services - 200130577 Biennial Maintenance Contract CMC for servicing calibration attending breakdowns and Government Inspection along with supply of spares for 60 MT Weighbridge at NTPC Barauni for NTPC 1072Barauni Thermal Power Plant

LTE as suggested by indenter