Loading
Loading…
Loading…
6,244 results • Best match
RESURFACING OF ROADS AND REPAIR/REPLACEMENT OF ROAD FURNITURE UNDER GE PANAJI
M & L for semi dense bituminous concrete 40mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG 30 grade) @ 5.5% by weight of total mix & hydraulic lime filler, rolled the surfaces by using 8 to 10 ton capacity power roller and compacted to required camber and gradient complete all as specified and as directed Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of SSR 2020
Resurfacing work of 45.0m wide road and 24.0m wide road Sector BZP area, Greater Noida.
Providing and laying 40mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 13.2mm nominal size at rate of 0.005 cum per 10 sqm and at an approximate spacing of 10cm centre to centre in both direction, pressed into surface when the temperature of surface is not less than 1000c protruding 1mm to 4mm over mastic surface, all complete as per MORTH5.11/clause-516 (ARGNIDA)
Resurfacing of road inside substation, extension of road to 11kV yard and construction of a new road from second main gate to staff quarters at 110kV substation, Kubanoor and resurfacing of road at 110kV substation, Mulleria
Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means :- Type A (II) Bitumen (S-65)
BID DOCUMENTS FOR ANNUAL RATE (ANNUAL BASIS) CONTRACT FOR ROAD RESURFACING WORK OF DAMAGED ASPHALT & RCC/CC ROAD IN VARIOUS AREA DUE TO HEAVY RAINFALL FOR SANAND NAGARPALIKA, SANAND.
THIRD ATTEMPT MOJ IRRIGATION SCHEME. Resurfacing of Approach Road of Moj Irrigation scheme
Resurfacing of Approach Road of Moj Irrigation scheme.
Resurfacing of 09mtr and 12mtr road in Sector Omicron-2, Greater Noida.
Providing and applying primer coat with SS1 grade bitumen VG-10 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means. (MORTH 502)